Generic Wireless Intercom System User Manual

소개

This manual provides detailed instructions for the setup, operation, and maintenance of your Generic Wireless Intercom System. This system is designed for seamless audio communication across multiple units, featuring 10 channels and a range of up to 6000 feet. Please read this manual thoroughly before using the device to ensure proper function and longevity.

상자 안에 무엇이 들어있나요?

• 3 x Wireless Intercom Units
• 3 x 전원 어댑터
• 충전기 3개

설치 지침

1. 장치에 전원 공급: Connect each wireless intercom unit to a power outlet using the provided adapter and charger. Ensure all units are powered on.
2. 채널 설정: Each intercom unit operates on a specific channel. To communicate between units, they must be set to the same group channel but different local numbers. Refer to the video below for detailed instructions on changing local numbers.
3. 놓기: Place intercom units at least 8 feet apart during calls to avoid audio feedback. For optimal signal range, avoid placing units near large metal objects or thick walls.
4. 초기 테스트: After powering on and setting channels, perform a test call to ensure all units are communicating correctly.

작동 지침

The Generic Wireless Intercom System offers several communication modes to suit your needs.

1. CALL Function (1-to-1 Communication)

To initiate a direct call to a specific unit, press the 부르다 button. The receiving device with the same frequency code will ring.

Image: Press the CALL button to initiate a direct call to another unit. The device with the matching frequency code will receive a series of rings.

2. GROUP Function (Broadcast Communication)

To send a voice message to all intercom units within the signal range, press and hold the 그룹 button. This is useful for announcements to multiple locations simultaneously.

Image: Press the GROUP button to broadcast voice messages to all intercom units in the signal range.

3. VOX 기능 (음성 활성화 송신)

그만큼 소리 function enables voice-activated transmission when the voice level reaches 50dB. If no voice is detected for 60 seconds, the unit will automatically exit voice control mode.

Image: The VOX button activates voice-controlled transmission when sound reaches 50dB.

4. MONITOR Function (Continuous Monitoring)

를 누르세요 감시 장치 button to keep the device in a continuous monitoring state for up to 10 hours. This allows for extended listening without manual activation.

Image: The MONITOR button enables continuous monitoring for up to 10 hours.

명세서

• 무선 주파수 : 462MHz-467MHz
• 채널 수량: 10
• 신호 범위: Up to 6000 feet (approximately 2 miles)
• 힘: 0.5와트
• 신호 감도: 120dBm
• 품목 무게: 2.29파운드(개당)
• 제품 크기: 6.29 x 1.57 x 4.13인치(단위당)

Image: Detailed dimensions of the intercom unit.

문제 해결

• No Sound/Communication: Ensure all units are powered on and connected to a power source. Verify that all units are set to the same group channel. Check that units are within the specified signal range.
• 간섭/음질 불량: Try moving units to different locations, away from large electronic devices or thick walls. Change the channel code if interference is suspected from other wireless devices nearby.
• VOX가 활성화되지 않음: Ensure the VOX button is pressed and that ambient noise levels are sufficient to trigger the voice activation (above 50dB).
• 단위가 응답하지 않음: Power cycle the unit by unplugging and re-plugging the power adapter. If issues persist, reset the unit to factory settings (refer to specific model instructions if available).

보증 및 지원

This Generic Wireless Intercom System comes with a standard manufacturer's warranty. For specific warranty details, please refer to the product packaging or contact the retailer. For technical support or further assistance, please reach out to the manufacturer's customer service.