ProLine 116-502 Gas Ball Valve

1. 제품 오버view

The ProLine 116-502 Gas Ball Valve is a forged brass valve designed for reliable shut-off in natural gas or LP gas applications. It features a durable 1-piece body construction and convenient 3/8-inch flare x flare connections. The valve is equipped with a chrome-plated ball and a quarter-turn lever handle for easy operation. This product is CSA 3-88 certified, ensuring compliance with safety and performance standards for gas appliances.

This image displays the ProLine 116-502 Gas Ball Valve, featuring a brass body, a yellow quarter-turn lever handle, and 3/8-inch flare connections on both ends. The valve is designed for gas applications.

2. 안전 정보

경고: 부적절한 설치, 조정, 변경, 서비스 또는 유지보수는 재산 피해, 부상 또는 사망을 초래할 수 있습니다. 이 장비를 설치하거나 서비스하기 전에 설치, 작동 및 유지보수 지침을 철저히 읽으십시오.

• Always ensure gas supply is turned off before installation or maintenance.
• 설치는 모든 지역 법규 및 규정에 따라 자격을 갖춘 전문가가 수행해야 합니다.
• 적절한 도구와 개인 보호 장비를 사용하십시오.
• Check for leaks after installation using a non-corrosive leak detection solution.
• 가스 누출을 점검하기 위해 화염을 사용하지 마십시오.
• This valve is intended for natural gas or LP gas applications only. Do not use for other media.

3. 설정 및 설치

This section provides general guidelines for the installation of the ProLine 116-502 Gas Ball Valve. Always refer to local plumbing and gas codes for specific requirements.

3.1 설치 전 확인 사항

1. Verify that the valve model 116-502 is suitable for your specific gas application (natural gas or LP gas).
2. Ensure the connection sizes (3/8-inch flare) match your existing piping.
3. Inspect the valve for any visible damage before installation. Do not install a damaged valve.
4. Gather all necessary tools, including wrenches, pipe thread sealant (if applicable for other connections in the system), and leak detection solution.

3.2 설치 단계

1. 가스 공급을 차단하세요: Locate the main gas shut-off valve and turn off the gas supply to the area where the valve will be installed.
2. 연결 준비: Ensure the flare connections on your gas lines are clean and free of debris.
3. 밸브 연결: Align the valve with the gas lines. Hand-tighten the flare nuts onto the valve's flare connections.
4. 연결을 강화하십시오: Using appropriate wrenches, carefully tighten the flare nuts. Do not overtighten, as this can damage the flare connections. Refer to manufacturer's recommendations for torque specifications if available, or tighten until snug and then an additional quarter to half turn.
5. 가스 공급을 복구하세요: Slowly turn the main gas supply back on.
6. 누출 확인: Apply a non-corrosive leak detection solution to all new connections. Bubbles indicate a leak. If a leak is detected, turn off the gas supply immediately, re-tighten the connection, and re-test. Repeat until no leaks are present.

4. 사용 설명서

The ProLine 116-502 Gas Ball Valve is designed for simple on/off operation.

• 밸브를 열려면: Rotate the yellow lever handle 90 degrees (a quarter-turn) so that it is parallel with the gas flow direction.
• 밸브를 닫으려면: Rotate the yellow lever handle 90 degrees (a quarter-turn) so that it is perpendicular to the gas flow direction.

The quarter-turn design allows for quick and easy visual confirmation of the valve's open or closed status.

5. 유지관리

The ProLine 116-502 Gas Ball Valve is designed for long-term, maintenance-free operation under normal conditions. Regular inspection is recommended.

• 정기 검사: Visually inspect the valve and connections periodically for any signs of corrosion, damage, or leaks.
• 누출 점검: If you suspect a leak, perform a leak check using a non-corrosive leak detection solution.
• 청소: Clean the exterior of the valve with a damp 필요한 경우 천으로 닦으십시오. 독한 화학 약품이나 연마성 세척제를 사용하지 마십시오.
• 사용자가 수리할 수 없는 부품: This valve contains no user-serviceable parts. Do not attempt to disassemble or repair the valve. If the valve is damaged or malfunctioning, it must be replaced by a qualified professional.

6. 문제 해결

This section addresses common issues that may arise with gas ball valves. Always prioritize safety and consult a professional for any complex issues.

• 가스 누출 감지:
  • 징후: Smell of gas, or bubbles when leak detection solution is applied.
  • 행동: Immediately turn off the main gas supply. Re-check all connections for proper tightening. If the leak persists, do not attempt further repairs. Contact a qualified gas technician.
• Valve Difficult to Turn:
  • 징후: Lever handle is stiff or hard to rotate.
  • 행동: Do not force the handle. Excessive force can damage the valve. If the valve is new, it may be slightly stiff initially. If it becomes stiff over time, it may indicate internal wear or debris. The valve should be replaced by a qualified professional.
• 가스 흐름 없음:
  • 징후: Appliance not receiving gas, even with valve in open position.
  • 행동: Ensure the valve handle is fully parallel to the pipe (open position). Check other shut-off valves in the system and the main gas supply. If the issue persists, contact a qualified gas technician.

7. 사양

8. 보증 정보

For specific warranty details regarding the ProLine 116-502 Gas Ball Valve, please refer to the official ProLine website or contact their customer service directly. Warranty terms typically cover manufacturing defects under normal use and service.

9. 고객 지원

If you have any questions, require technical assistance, or need to report an issue with your ProLine 116-502 Gas Ball Valve, please contact ProLine customer support through their official channels. Always provide the model number (116-502) when seeking support.

일반 문의 사항은 다음을 방문하세요. ProLine brand page on Amazon.