1. 제품 오버view
The Winees WiFi Water Leak Detector S1 Lite is designed to provide real-time water leak detection and alerts, helping to prevent potential water damage in your home. This system includes a central hub and compact water sensors that communicate wirelessly.
Image: Winees S1 Lite Water Leak Detector Hub and Sensor.
- 원격 모니터링: Connect the hub to 2.4G WiFi for real-time monitoring via a mobile application.
- 넓은 전송 범위: Sensors can communicate with the hub up to 100 meters (328 feet) away, even in basements.
- 즉시 알림: Receive alerts via the app, email, and SMS when a water leak is detected.
- 조절 가능한 알람: The hub features a 100dB alarm with high, medium, and low volume settings, and an instant mute function.
- Compact & Waterproof Sensors: Sensors are only 1.8mm thick, IP66 waterproof, and designed for placement in hidden corners.
- IFTTT Compatible: Integrates with IFTTT for enhanced smart home automation.
2. 상자 안에 무엇이 들어있나요?
Your Winees WiFi Water Leak Detector S1 Lite package includes the following components:
- 1 x Wi-Fi Hub
- 1 x Water Leak Sensor
- CR2450 배터리 1개 (센서에 사전 설치됨)
- 1 x Battery Cover Tool
- 1 x 빠른 시작 가이드
Image: The Winees S1 Lite package contents, showing the hub, a sensor, and the quick start guide.
3. 설정 지침
3.1 Download the AiDot App
- 검색 "AiDot" in your smartphone's app store (iOS or Android).
- 응용 프로그램을 다운로드하여 설치하십시오.
- Create an account and follow the in-app instructions to confirm your email.
3.2 Activate the Sensor Battery
Before use, activate the sensor by removing the plastic insulation tab from the battery compartment.
- Use the supplied battery cover tool or a coin to gently twist and open the back cover of the sensor.
- Remove the plastic insulation tab covering the CR2450 battery.
- Replace the battery cover, ensuring it is securely closed.
Image: Activating the sensor battery by removing the plastic tab.
3.3 Plug in the Wi-Fi Hub
Plug the Wi-Fi hub into a standard electrical outlet in an area with good 2.4G WiFi signal coverage. The hub will automatically enter pairing mode.
3.4 Add Devices to the App
The water leak sensor is pre-paired with the hub by default. If you need to add additional sensors or re-pair, follow these steps:
- Open the AiDot app and navigate to "My Home".
- Tap "Add Device" or the '+' icon.
- Scan the QR code located on the back of each sensor.
- Follow the on-screen prompts to assign the sensor to a room (e.g., Kitchen, Laundry Room, Basement) for easy identification.
Image: Direct pre-pairing between the hub and sensor for simplified setup.
4. 사용 설명서
4.1 센서 배치
Place the water leak sensors in areas prone to water leaks, ensuring they lie flat on the ground. Common locations include:
- 싱크대 아래 (주방, 욕실)
- 세탁기나 식기세척기 근처
- 지하실이나 다용도실
- Near water heaters or sump pumps
Image: The 1.8mm thin sensor can be placed discreetly in any corner.
Image: Connect multiple sensors throughout your home for comprehensive coverage.
4.2 알림 수신
When a water leak is detected, the system will trigger multiple alert modes:
- 가청 경보: The hub will sound a 100dB alarm.
- 앱 알림: Receive instant push notifications on your smartphone via the AiDot app.
- Email & SMS: Configured email addresses and phone numbers will receive alerts.
Image: Multiple notification methods ensure you are always informed of a leak.
4.3 알람 제어
- 볼륨 조절: The hub has buttons to adjust the alarm volume (high/medium/low).
- 음소거 알람: Press any button on the hub or use the AiDot app to instantly mute the alarm.
- 알람 지속 시간: Configure alarm duration settings (always ringing, 10 minutes, 1 minute, 30 seconds) via the app.
Image: Adjustable volume settings for the hub alarm.
Image: One-key function to turn off the alarm.
4.4 공식 제품 영상
Video: An official product video from Winees demonstrating the S1 Plus Water Leak Detector's features and benefits.
5. 유지관리
5.1 배터리 교체
The water leak sensor uses a CR2450 Lithium-Ion battery. The battery life is approximately 365 days. When the battery is low, the app will notify you. To replace the battery:
- Use the supplied battery cover tool or a coin to gently twist and open the back cover of the sensor.
- 기존 CR2450 배터리를 제거하세요.
- 새 CR2450 배터리를 양극(+)이 위를 향하게 하여 삽입하세요.
- Replace the battery cover, ensuring it is securely closed.
6. 문제 해결
If you encounter issues with your Winees WiFi Water Leak Detector S1 Lite, consider the following:
- 알림 없음: Ensure the hub is connected to a stable 2.4G WiFi network and the sensors are within the 100m transmission range. Check app notification settings and email/SMS spam folders.
- 허위 경보: Verify that sensors are placed on a dry, flat surface and not in areas prone to condensation or accidental splashes.
- 연결 문제: Restart the Wi-Fi hub and your home router. Ensure the hub is placed in an area with strong WiFi signal.
- 센서가 응답하지 않음: Check the sensor battery level in the app. If low, replace the battery. Re-pair the sensor with the hub if necessary.
For further assistance, refer to the detailed troubleshooting section in the AiDot app or contact Winees customer support.
7. 사양
| 특징 | 사양 |
|---|---|
| 상표 | 포도주 양조장 |
| 모델 | S1 라이트 |
| 전원 | Battery Powered (Sensor), Plug-in (Hub) |
| 호환 장치 | Smartphone (via AiDot App) |
| 제품 치수 | 6.14인치 길이 x 3.27인치 너비 x 2.17인치 높이 |
| 배터리 유형(센서) | 1 Lithium-Ion (CR2450) battery required (included) |
| 제어 방법 | 앱 |
| 가청 소음 | 100데시벨 |
| 장착 유형 | 플로어 마운트 |
| 최대 범위 | 100미터(328피트) |
| 센서 기술 | WiFi 누수 감지기 |
| 방수 등급 | IP66 |
| 품목 무게 | 0.14 킬로그램 |
8. 보증 및 지원
Winees is committed to providing high-quality products and customer satisfaction.
- 30일 반품 정책: Enjoy a 30-day return window with no questions asked.
- 24-Month Unconditional Replacement: Products are eligible for unconditional replacement within 24 months of purchase.
- 평생 보증: Winees provides permanent service and technical support for its products.
- 24-Hour Quick Response: 문의하신 내용에 대해 24시간 이내에 빠른 답변을 드리겠습니다.
For support, please visit the official Winees web사이트를 방문하거나 고객 서비스 팀에 직접 문의하세요.