1. 서론
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your U.S. Solid Electric Strapping Machine, Model USS-ESM00026. Please read this manual thoroughly before using the machine to ensure proper function and to prevent injury or damage.
The U.S. Solid Electric Strapping Machine is a battery-powered, handheld automatic banding tool designed for securing packages, boxes, and pallets with PET (polyester) strapping. It integrates tensioning, welding, and cutting functions into a single device, enhancing work efficiency and reducing manual effort.
그림 1: 전면 view of the U.S. Solid Electric Strapping Machine.
2. 패키지 내용
Verify that all items are present and undamaged upon unpacking. If any items are missing or damaged, contact U.S. Solid customer support.
- Packing machine (1 unit)
- 충전기(1대)
- Tool kit (1 set)
- 배터리 (2개)
- 사용설명서(1개)
3. 사양
The following table outlines the technical specifications for the USS-ESM00026 Electric Strapping Machine:
Figure 2: Technical parameters of the strapping machine.
| 매개변수 | 값 |
|---|---|
| Suitable Strap Width | 1/2 - 1 inch (12-25 mm) |
| Suitable Strap Thickness | 0.4mm - 1.20mm |
| 스트랩 소재 | PET(폴리에스테르) |
| Adjustable Tensile Strength | 600 - 5500 N |
| Tensioning Speed | 60 - 200 mm/s |
| 배터리 유형 | 리튬 이온(2개 포함) |
| 배터리 용량 | 4000 mAh per battery |
| 완전 충전 시간 | 약 100분 |
| Straps per Full Charge | Up to 180 straps per battery (360 total with 2 batteries) |
| 품목 무게 | 13.42파운드(약 6.09kg) |
| 패키지 크기 | 17.2 x 11.2 x 7.2 인치 |
4. 안전 정보
부상이나 손상의 위험을 줄이려면 항상 다음 안전 예방 조치를 준수하세요.
- 기계를 작동하기 전에 모든 지침을 읽으십시오.
- 안전 안경과 장갑 등 적절한 개인 보호 장비(PPE)를 착용하세요.
- 작업 공간이 깨끗하고, 조명이 밝으며, 방해물이 없는지 확인하세요.
- 작동 중에는 움직이는 부분에 손이나 헐렁한 옷을 가까이 두지 마십시오.
- 습하거나 건조한 환경에서는 기계를 작동하지 마십시오.amp 정황.
- Use only the specified PET strapping material within the recommended width and thickness ranges.
- Do not over-tension straps, as this can lead to strap breakage or damage to the machine or package.
- Disconnect the battery before performing any maintenance or adjustments.
- Store the machine and batteries in a dry, secure location away from children and unauthorized users.
5. 설정
5.1 배터리 설치 및 충전
- Ensure the battery is fully charged before first use. Connect the charger to the battery and a power outlet. The charger indicator light will show charging status.
- To install the battery, align the battery pack with the slot at the base of the machine handle and slide it in until it clicks securely into place.
- 배터리를 제거하려면 배터리 팩의 분리 버튼을 누르고 밀어서 빼냅니다.
Battery Guidelines: Battery life varies by usage and environment. To maintain performance, avoid overcharging or leaving the battery at 0% for extended periods.
Figure 3: Battery attached to the machine.
6. 사용 설명서
Follow these steps for proper operation of the electric strapping machine:
6.1 Adjusting Tensioning Force and Welding Time
The machine features an LCD screen for precise adjustment of parameters. The display shows 'F' for tightening force and 'E' for welding time.
Figure 4: LED Display Panel for adjustments.
- Tightening Force (F1): Press the left button (F) to display F1. Use the middle (▲) button to increase tension and the right (▼) button to decrease tension. Calibration ranges from 1-6.
- Welding Time (F2): Press the left button (F) again to display F2. Use the middle (▲) button to increase welding time and the right (▼) button to decrease welding time. Calibration ranges from 1.0-5.0 seconds.
6.2 Loading Straps
- Wind the straps as shown in the video. Ensure the strap that needs to be cut is stacked on top.
- Lift the handle of the machine with your right hand.
- Insert the two parallel straps into the machine with your left hand, ensuring they are properly aligned.
- Release the handle to secure the straps.
6.3 Tensioning the Strap
- Press the tensioning button (located on top of the handle).
- The indicator light will display blue during the tensioning process.
- Once the desired strap tensioning strength is reached, release the switch knob. Do not press the switch knob beyond the desired tension to avoid breaking the straps.
6.4 Welding and Cutting the Strap
- Press the welding button (located on the side of the handle). Immediately remove your hands from the machine.
- The plastic strap will be welded, and the redundant strap will be cut off.
- The welding process is complete when the indicator light flashes blue.
6.5 Removing the Machine
- First, press the rewind button at the bottom of the machine.
- Then, lift the handle.
- Finally, remove the machine from the strapped package.
6.6 작동 비디오 가이드
Watch this video for a visual demonstration of the strapping machine's operation, including strap loading, tensioning, welding, and removal.
Video 1: Demonstration of the U.S. Solid Electric Strapping Machine in use, showing the full strapping process.
7. 유지관리
Regular maintenance ensures the longevity and optimal performance of your strapping machine:
- 청소: Regularly clean the machine, especially the strap feeding and welding areas, to prevent accumulation of dust and strap residue. Use a dry cloth; do not use solvents or abrasive cleaners.
- 배터리 관리 : Follow battery guidelines to maximize battery life. Store batteries in a cool, dry place. Do not expose them to extreme temperatures.
- 점검: Periodically inspect the machine for any signs of wear, damage, or loose components. Address any issues promptly.
- 매끄럽게 하기: Refer to the detailed tool kit instructions for any specific lubrication requirements.
8. 문제 해결
밴딩기 사용 중 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 기계가 켜지지 않습니다 | 배터리가 올바르게 설치되지 않았거나 방전되었습니다. | 배터리가 완전히 삽입되었는지 확인하세요. 배터리를 충전하거나 교체하세요. |
| 스트랩이 제대로 조여지지 않음 | Tension setting too low; incorrect strap loading; worn tensioning wheel. | Adjust tension setting (F1). Re-load straps correctly. Inspect and clean tensioning wheel. |
| 스트랩 용접 불량 | Welding time too short; welding mechanism dirty; incorrect strap material. | Increase welding time (F2). Clean welding mechanism. Ensure correct PET strap is used. |
| 스트랩을 조이는 도중 끊어짐 | Tension setting too high; strap quality poor; strap width/thickness incorrect. | Decrease tension setting (F1). Use high-quality straps. Verify strap dimensions meet specifications. |
| Machine jams or stops | Strap residue build-up; foreign object; internal malfunction. | Clean strap path. Remove any obstructions. If problem persists, contact support. |
9. 보증 및 지원
U.S. Solid provides a standard warranty for this product. For specific warranty terms, duration, and conditions, please refer to the warranty card included with your purchase or visit the official U.S. Solid website. For technical support, replacement parts, or service inquiries, please contact U.S. Solid customer service through their official channels.
자세한 정보와 연락처는 다음에서 확인할 수 있습니다. U.S. Solid Store on Amazon.