RAF Electric Heater R.1175 User Manual

1. 중요 안전 지침

Please read all instructions carefully before using this electric heater. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• 전기 안전: Ensure the heater is connected to a 220V, 50Hz grounded outlet. Do not overload electrical circuits. Avoid using extension cords unless absolutely necessary and ensure they are rated for the heater's wattag전자 (2400W).
• 놓기: Place the heater on a stable, level surface. Maintain a minimum distance of 1 meter (3 feet) from walls, furniture, curtains, and other combustible materials. Do not place the heater in areas where it may be exposed to water or high humidity.
• 통풍: Do not cover the heater or block its air inlets/outlets. Proper ventilation is essential to prevent overheating.
• 감독: 히터를 작동 중일 때는 자리를 비우지 마십시오. 어린이와 반려동물이 히터에 가까이 가지 않도록 하십시오.
• 유지: 히터를 청소하거나 유지 보수를 하기 전에는 항상 전원 콘센트에서 플러그를 뽑으십시오.
• 손상: Do not operate the heater with a damaged cord or plug, or if the heater has malfunctioned or been dropped. Contact qualified service personnel for repair.
• 용도: This heater is designed for indoor use only, specifically for heating rooms. Do not use it for drying clothes or other purposes.

2. 제품 오버view

The RAF Electric Heater R.1175 is a 2400W radiant heater designed to provide efficient warmth for indoor spaces. It features an adjustable temperature control for personalized comfort and is built for floor mounting.

Figure 2.1: RAF Electric Heater R.1175 and its packaging, highlighting key features.

그림 2.2: 전면 view of the RAF Electric Heater R.1175.

3. 기술 사양

4. 설정 지침

1. 히터 풀기: Carefully remove the heater from its packaging. Retain packaging materials for future storage or transport.
2. 손상 여부 검사: Before first use, inspect the heater for any signs of damage. Do not use if damaged.
3. 위치를 선택하세요: Place the heater on a firm, level, heat-resistant surface. Ensure there is at least 1 meter (3 feet) of clear space around the heater from all combustible materials (e.g., furniture, curtains, paper). Do not place it directly under a power outlet.
4. 전원 연결: Ensure the heater's power cord is fully extended and not tangled. Plug the heater directly into a suitable 220V, 50Hz grounded wall outlet. Avoid using extension cords or power strips if possible. If an extension cord is necessary, ensure it is rated for 2400W or higher.

5. 사용 설명서

1. 전원 켜기: Once plugged in, locate the power switch or knob on the heater. Turn it to the "ON" position or desired heat setting.
2. Adjust Temperature/Heat Settings: The RAF R.1175 features adjustable temperature control. Rotate the thermostat knob (if present) or select the desired heat level (e.g., Low, Medium, High) to achieve your preferred room temperature. The heater will cycle on and off to maintain the set temperature.
3. 초기 사용: During the first few minutes of operation, a slight odor may be detected. This is normal and will dissipate quickly.
4. 전원 끄기 : To turn off the heater, switch the power control to the "OFF" position. Unplug the heater from the wall outlet when not in use for extended periods.

6. 유지 관리 및 보관

• 청소: 청소하기 전에 항상 히터의 플러그를 뽑고 완전히 식히십시오. 부드러운 천을 사용하십시오.amp 외부 표면을 닦을 천을 사용하십시오. 연마성 세제나 용제를 사용하지 마십시오. 히터 내부로 물이 들어가지 않도록 하십시오.
• 먼지 제거: Periodically use a vacuum cleaner with a brush attachment to remove dust from the grilles and heating elements.
• 저장: When not in use, store the heater in a cool, dry place, preferably in its original packaging. Ensure the power cord is neatly wrapped and not kinked.

7. 문제 해결

히터가 제대로 작동하지 않을 경우, 고객 지원 센터에 문의하기 전에 다음 사항을 확인하십시오.

8. 보증 및 고객 지원

For warranty information, please refer to the documentation provided with your purchase or contact the retailer. Keep your proof of purchase for warranty claims.

If you experience any issues not covered in the troubleshooting section, or require further assistance, please contact RAF customer support through their official channels or your point of purchase.