POPETPOP LED Aquarium Light Clip-on Fish Tank Lamp 사용자 설명서

소개

Thank you for choosing the POPETPOP LED Aquarium Light. This manual provides essential information for the safe and effective use of your new aquarium lamp. Please read these instructions carefully before installation and operation, and retain them for future reference.

Image: The POPETPOP LED Aquarium Light, featuring a flexible gooseneck, a circular LED head, an inline power switch, and a USB power cable with a clip for attachment.

안전 정보

• Ensure the power source is compatible with the device's USB input (3W).
• Do not immerse the light head or USB connector in water. This product is not submersible.
• 어린이의 손이 닿지 않는 곳에 보관하세요.
• 유지관리나 청소를 하기 전에 전원을 분리하세요.
• 직접 분해하거나 수리하지 마십시오. 정비를 받으려면 자격을 갖춘 기술자에게 문의하십시오.
• Ensure the clip is securely attached to the aquarium wall to prevent accidental detachment.

패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• 1 x POPETPOP LED Aquarium Lamp

이미지: 자세한 view of the light's components, showing the LED array, the USB plug, and the inline power switch.

제품 특징

• 내구성 있는 구조: Made of plastic material, designed for wear resistance and safety in an aquatic environment.
• 유연한 목: Allows for easy adjustment of light angle and position.
• 보안 클립: Designed for stable attachment to aquarium walls with a thickness between 2-5mm (0.08-0.2 inches).
• 다채로운 LED 조명: Provides illumination that enhances fish colors and supports aquatic plant growth through comprehensive photosynthesis.
• 컴팩트한 디자인: Small and lightweight, minimizing space usage.

이미지: 클로즈업 views highlighting the safety of the materials and the practical design of the inline switch and LED light panel.

설치 지침

1. 빛의 짐을 풀어보세요: Carefully remove the LED aquarium light from its packaging.
2. 장착 위치 식별: Choose a suitable location on the edge of your aquarium where the light can be securely clipped. Ensure the aquarium wall thickness is between 2-5mm.
3. 클립 부착: Align the light's clip with the aquarium wall and press down firmly to secure it in place. Ensure it is stable and does not wobble.
4. 조명 배치: Adjust the flexible neck to direct the light over your desired area of the aquarium.
5. 전원 연결: Plug the USB connector into a compatible USB power adapter (not included) or a USB port on another device.

Image: The LED aquarium light securely clipped to the edge of a fish tank, demonstrating proper installation and illumination.

작동 지침

1. 전원 켜기: Once the USB cable is connected to a power source, press the inline switch located on the cable to turn the light on.
2. 위치 조정: If needed, gently adjust the flexible neck to fine-tune the light's direction.
3. 전원 끄기 : Press the inline switch again to turn the light off.

유지

• 청소: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the light head and flexible neck. Do not use abrasive cleaners or immerse any part of the light in water.
• 정기 검사: Periodically check the USB cable for any signs of damage or wear. Ensure the clip remains securely attached to the aquarium.
• 저장: If storing the light for an extended period, ensure it is clean and dry. Store in a cool, dry place away from direct sunlight.

문제 해결

명세서

Image: A diagram illustrating the dimensions of the light, showing a length of 18cm (7.07in) and a head width of 4cm (1.57in).

보증 및 지원

For warranty information or technical support, please refer to the retailer's policy or contact POPETPOP customer service through their official channels. Keep your purchase receipt as proof of purchase.

추가 지원이 필요하면 다음을 방문하세요. POPETPOP Store on Amazon.