AkaGear DS10 Pro Keyless Entry Door Lock User Manual

1. 제품 오버view

The AkaGear DS10 Pro is a smart keyless entry door lock designed for enhanced home security and convenience. It offers multiple unlocking options including fingerprint, PIN code, smartphone app control via Bluetooth, and traditional mechanical keys. This lock features fast fingerprint recognition, auto-lock functionality, mute mode for quiet entry, and long battery life with backup power options.

Image: The AkaGear DS10 Pro smart lock illustrating its four primary unlocking methods: smartphone app, fingerprint, keypad code, and physical key.

2. 안전 정보

• 설치 및 사용 전에 모든 지침을 읽으십시오.
• 잠금 장치를 분해하거나 개조하지 마십시오. 이는 보증을 무효화하고 보안을 손상시킬 수 있습니다.
• 지정된 배터리(AA 배터리 4개, 미포함)만 사용하십시오. 오래된 배터리와 새 배터리를 혼용하거나 종류가 다른 배터리를 사용하지 마십시오.
• Keep mechanical keys in a safe place outside the home to prevent lockout.
• Avoid exposing the lock to direct water spray or harsh chemicals.

3. 패키지 내용

설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.

• Fingerprint deadbolt door lock (exterior keypad and interior unit)
• 2개의 표준 키
• 래치 메커니즘
• 스트라이크 플레이트
• 장착 플레이트
• 나사 (설치용 다양한 크기)
• Installation Instructions / Template

Image: A complete set of AkaGear DS10 Pro smart lock components, including the main lock units, latch, keys, and mounting hardware.

4. 설치 가이드

The AkaGear DS10 Pro is designed for easy installation on standard US doors (left or right-handed) with a screwdriver. No complex adjustments are typically required.

4.1 문을 준비하세요

문이 다음 사양을 충족하는지 확인하세요.

• 문 두께: 1-3/8인치 ~ 2인치 (35mm ~ 50mm)
• 백셋: 2-3/8인치 또는 2-3/4인치 (60mm 또는 70mm)
• Door hole diameter: 2-1/8" (54mm)

Image: A detailed diagram illustrating the required door dimensions and lock component sizes for proper installation.

4.2 단계별 설치

1. 래치를 설치하십시오: Insert the latch into the door edge. Ensure the 'UP' sign on the latch is pointing upwards. Secure with screws.
2. 키패드를 설치합니다: Feed the cable from the exterior keypad through the door hole. Align the keypad with the latch and door.
3. 장착 플레이트 설치: Secure the mounting plate to the interior side of the door, ensuring the cable passes through the designated opening. Connect the cable from the keypad to the interior unit.
4. Install the Interior Unit: Attach the interior unit to the mounting plate, ensuring the spindle engages correctly with the latch. Secure with screws.
5. 배터리 삽입: Open the battery cover on the interior unit and insert 4 AA batteries (not included), observing polarity.
6. 테스트 작업: After battery insertion, the lock will perform an automatic orientation process. Wait for 5 seconds for this to complete. Test the lock using the mechanical key and by manually turning the knob.

Image: A visual step-by-step guide demonstrating the installation process of the AkaGear DS10 Pro smart lock.

5. 설정 및 프로그래밍

After installation, program your lock for secure access. The default programming code is 123456.

5.1 Initial Setup and Programming Code Change

It is recommended to change the default programming code immediately after installation. Refer to the programming video for detailed steps.

5.2 Adding User Codes and Fingerprints

The lock supports up to 300 PIN codes and 50 fingerprints. Follow the voice prompts during programming.

Image: The AkaGear DS10 Pro smart lock highlighting its capacity for up to 50 fingerprints, 300 user codes, and the inclusion of 2 physical keys.

5.3 스마트폰 앱 제어

Connect the lock via Bluetooth to your smartphone app to add users, set permissions, and monitor access logs. For remote control and integration with Alexa/Google Home Assistant, a separate Gateway (ASIN: B0F5GKK5HY) is required.

Image: The smartphone application interface for the AkaGear DS10 Pro, demonstrating easy management of lock settings and user access.

6. 사용 설명서

6.1 잠금 해제 방법

• 지문: Place your registered finger on the sensor for 0.3-second recognition.
• PIN 코드: 키패드에 4~9자리 PIN 코드를 입력하세요.
• 스마트폰 앱: Use the AkaGear app to unlock the door via Bluetooth.
• 기계식 키: Use the provided physical keys as a backup.

Image: The AkaGear DS10 Pro lock demonstrating its fast fingerprint unlock feature with a 0.3-second identification time.

6.2 Auto-Lock & Mute Mode

• 자동 잠금: The lock can be set to automatically secure your home 5-59 seconds after closing the door. This feature can be enabled or disabled via programming.
• 음소거 모드: Enable mute mode for quiet entry and exit, preventing disturbance to others.

Image: The AkaGear DS10 Pro smart lock's auto-lock feature, which secures the door automatically within 5-59 seconds after closing.

7. 유지관리

7.1 배터리 교체

The lock operates on 4 AA batteries (not included) with a battery life of up to 12 months (approximately 7,000 cycles). The lock will provide low-battery alerts when replacement is needed.

7.2 백업 전원

In case of complete battery depletion, the lock can be temporarily powered via a USB-C port for emergency access.

Image: The AkaGear DS10 Pro smart lock highlighting its long battery life and the low battery indicator light, ensuring you are aware when batteries need replacement.

8. 문제 해결

• 잠금이 응답하지 않습니다. Check battery levels. Replace batteries if low. Ensure the cable connection between the keypad and interior unit is secure.
• 지문이 인식되지 않습니다: 손가락이 깨끗하고 건조한지 확인하세요. 지문을 다시 등록해 보세요.
• PIN 코드가 작동하지 않습니다: Verify the code is correct. Ensure the lock is not in mute mode if expecting voice feedback.
• 자동 잠금 기능이 작동하지 않음: Check the auto-lock settings in the programming menu or via the app.
• Door lock orientation issue: The lock automatically identifies left/right door orientation. If issues persist, perform a factory reset and re-install.

9. 사양

10. 보증 및 지원

For warranty information, technical support, or any inquiries regarding your AkaGear DS10 Pro Keyless Entry Door Lock, please refer to the contact information provided in your product packaging or visit the official AkaGear web대지.