JBL JBLPARTYBOXGOBAM, Vibe Beam

JBL PartyBox On-The-Go Speaker and Vibe Beam Headphones User Manual

소개

This manual provides detailed instructions for the safe and effective use of your JBL PartyBox On-The-Go portable Bluetooth speaker and JBL Vibe Beam True Wireless Headphones. Please read this manual thoroughly before operating your devices and retain it for future reference.

상자 안에 무엇이 들어있나요?

Carefully unpack all items and ensure the following are present:

  • JBL PartyBox On-The-Go Speaker
  • JBL Wireless Microphone
  • Carrying Strap with Bottle Opener
  • 전원 케이블
  • JBL Vibe Beam True Wireless Headphones (Left and Right earbuds)
  • JBL Vibe Beam Charging Case
  • USB-C Charging Cable for Vibe Beam
  • Multiple sizes of ear tips for Vibe Beam
  • Quick Start Guide and Safety Sheet for both products
JBL PartyBox On-The-Go speaker with wireless microphone

Image: JBL PartyBox On-The-Go speaker shown with its included wireless microphone.

JBL Vibe Beam True Wireless Headphones in charging case

Image: JBL Vibe Beam True Wireless Headphones resting inside their charging case.

JBL PartyBox On-The-Go Setup

1. 스피커 충전

Before first use, fully charge the PartyBox On-The-Go. Connect the power cable to the speaker's power input and then to a power outlet. The battery indicator will show charging status. A full charge takes approximately 3.5 hours.

2. 전원 켜기 / 끄기

를 누르세요 전원 버튼 상단 패널을 사용하여 스피커를 켜거나 끌 수 있습니다.

3. 블루투스 페어링

  1. Turn on the PartyBox On-The-Go.
  2. 를 누르세요 블루투스 버튼 상단 패널에 있습니다. Bluetooth 표시등이 깜박이며 페어링 모드를 나타냅니다.
  3. On your device (smartphone, tablet, etc.), enable Bluetooth and select "JBL PartyBox On-The-Go" from the list of available devices.
  4. 연결되면 Bluetooth 표시등이 파란색으로 계속 켜집니다.

4. 마이크 연결

Insert the wireless microphone's receiver into the microphone input on the speaker. The microphone will automatically connect. Adjust microphone volume and echo using the dedicated knobs on the speaker's top panel.

JBL PartyBox On-The-Go speaker with shoulder strap

Image: JBL PartyBox On-The-Go speaker shown with its detachable shoulder strap attached.

JBL PartyBox On-The-Go Operating Instructions

1. 음악 재생

  • 블루투스: Play music from your paired device. Use the volume controls on the speaker or your device.
  • USB: 오디오가 포함된 USB 드라이브 삽입 fileUSB 포트에 꽂으세요. 스피커가 자동으로 드라이브의 음악을 재생합니다.
  • 보조: Connect an audio device using a 3.5mm AUX cable to the AUX input.

2. 조명 쇼 제어

를 누르세요 라이트 쇼 버튼 to cycle through different light patterns or turn the light show off. The lights sync to the music.

3. 베이스 부스트

를 누르세요 베이스 부스트 버튼 to enhance the bass output. Press again to turn it off.

4. True Wireless Stereo(TWS) 연결

You can connect two JBL PartyBox On-The-Go speakers together for a stereo sound experience:

  1. 두 스피커 모두 전원이 켜져 있는지 확인하세요.
  2. 한쪽 스피커에서 길게 누르세요 TWS 버튼 for 5 seconds. It will emit a pairing tone.
  3. Repeat this step on the second speaker.
  4. The speakers will connect automatically. The TWS indicator will glow solid on both speakers.

5. Using the Microphone and Instrument Input

Adjust the microphone volume and echo using the dedicated knobs. You can also connect an instrument (e.g., guitar) to the instrument input and adjust its volume independently.

JBL PartyBox On-The-Go speaker rear view 마이크

이미지: 후면 view of the JBL PartyBox On-The-Go speaker, showing input ports and the wireless microphone.

JBL Vibe Beam Headphones Setup

1. 헤드폰 및 케이스 충전

Place the earbuds into the charging case. Connect the USB-C cable to the case and then to a power source. The LED indicators on the case will show the charging status. The earbuds and case can be charged simultaneously.

2. 초기 페어링

  1. 충전 케이스를 여세요. 이어버드가 자동으로 페어링 모드로 진입합니다.
  2. 기기에서 블루투스를 활성화하고 사용 가능한 기기 목록에서 "JBL Vibe Beam"을 선택하세요.
  3. 연결되면 이어버드에 페어링이 성공적으로 완료되었다는 메시지가 표시됩니다.

3. 헤드폰 착용

Insert the earbuds into your ears and gently twist them to find a comfortable and secure fit. Experiment with the different ear tip sizes to achieve optimal sound quality and comfort.

JBL Vibe Beam True Wireless Headphones in open charging case

Image: JBL Vibe Beam True Wireless Headphones in their open charging case, showing the earbuds and charging indicators.

JBL Vibe Beam Headphones Operating Instructions

1. 터치 컨트롤

The Vibe Beam headphones feature touch controls on each earbud:

  • 단일 탭 : 음악 재생/일시 정지, 전화 받기/끊기.
  • 두 번 탭 : Skip forward (right earbud), Skip backward (left earbud), Reject call.
  • 트리플 탭 : 음성 어시스턴트를 활성화하세요.
  • 길게 누르기 : Volume control (customizable via JBL Headphones App).

2. VoiceAware

During calls, VoiceAware allows you to control how much of your own voice you hear through the earbuds, enhancing call clarity and comfort. This feature can be adjusted via the JBL Headphones App.

3. 단일 이어버드 사용

Either earbud can be used independently. Simply remove one earbud from the case, and it will automatically connect to your device if already paired.

JBL Vibe Beam True Wireless Headphones, individual earbuds

이미지: 클로즈업 view of the two JBL Vibe Beam True Wireless Headphones earbuds.

유지

1. 청소

  • PartyBox On-The-Go: 부드러운 천으로 스피커를 닦고 damp cloth. Do not use abrasive cleaners or immerse the speaker in water.
  • Vibe Beam Headphones: Gently clean the earbuds and charging case with a dry, soft, lint-free cloth. Remove ear tips and clean them with mild soap and water, then dry thoroughly before reattaching.

2. 보관

Store both products in a cool, dry place away from direct sunlight and extreme temperatures. For the Vibe Beam headphones, always store them in their charging case when not in use.

3. 배터리 관리

To prolong battery life, fully charge the devices at least once every 3 months if not used regularly. Avoid completely draining the battery frequently.

4. 방수 및 방진 기능

  • The JBL PartyBox On-The-Go is IPX4 splash-proof, meaning it can withstand splashes of water but should not be submerged.
  • The JBL Vibe Beam earbuds are IP54 certified (dust and splash resistant), and the charging case is IPX2 (drip resistant). Ensure the charging port covers are securely closed before exposure to water or dust.

문제 해결

JBL PartyBox 온더고

  • 전원 없음: Ensure the speaker is charged or connected to a power outlet.
  • 소리 없음: Check volume levels on both the speaker and your connected device. Ensure the correct input source is selected.
  • 블루투스 페어링 문제: Ensure the speaker is in pairing mode. Turn off and on Bluetooth on your device, then try pairing again. Clear previous pairings from your device's Bluetooth list.
  • 마이크가 작동하지 않음: Ensure the microphone receiver is fully inserted and the microphone is powered on (if applicable). Check microphone volume.

JBL Vibe Beam Headphones

  • No Sound from one earbud: Place both earbuds back in the charging case, close the lid, then reopen and try again. Ensure both earbuds are charged.
  • 페어링 문제: Ensure the earbuds are in pairing mode (open case). Turn off and on Bluetooth on your device. Forget "JBL Vibe Beam" from your device's Bluetooth list and re-pair.
  • 이어폰이 충전되지 않음: 이어버드와 케이스의 충전 접점이 깨끗하고 건조한지 확인하십시오.

명세서

JBL PartyBox On-The-Go Speaker

  • 상표: 제이비엘
  • 모델 이름: JBLPARTYBOXGOBAM
  • 스피커 최대 출력: 100 와트
  • 연결 기술 : 블루투스, USB, AUX
  • 오디오 출력 모드: 스테레오 재생
  • 배터리 평균 수명: 6시간
  • 배터리 충전 시간: 3.5시간
  • 방수 등급: IPX4(방수)
  • 내장 미디어: JBL wireless microphone, carrying strap with bottle opener

JBL Vibe Beam True Wireless Headphones

  • 상표: 제이비엘
  • 오디오 드라이버 유형: 동적 드라이버
  • 드라이버 크기: 8mm
  • 배터리 사용 시간(이어폰 + 케이스): Up to 32 total hours
  • Water and Dust Resistance (Earbuds): IP54
  • Water Resistance (Charging Case): IPX2
  • 특징: JBL Deep Bass Sound, VoiceAware, Hands-free calls

보증 및 지원

Your JBL PartyBox On-The-Go Speaker and JBL Vibe Beam True Wireless Headphones are covered by a limited warranty. For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official JBL web대지.

For technical support, troubleshooting assistance, or service inquiries, please contact JBL customer support through their official web사이트 또는 제품 설명서에 제공된 연락처 정보를 참조하세요.