소개
Thank you for choosing the BN-LINK Countdown Timer Switch (Model CP-U211C). This device is designed to provide convenient, energy-saving control for your exhaust fans, bathroom fans, and various lighting types. By automating shut-off operations, it helps reduce energy consumption and improve convenience in your home or office.
설치 및 작동 전에 본 설명서를 꼼꼼히 읽어 올바른 사용과 안전을 확보하십시오.
중요한 안전 정보
경고: 감전의 위험이 있습니다.
- 설치는 자격을 갖춘 전기 기술자 또는 전기 배선 및 시스템에 대한 해박한 지식을 가진 사람이 수행해야 합니다.
- Always turn off power at the circuit breaker or fuse box before installing or servicing the switch.
- This device requires a neutral wire for operation. If your existing switch box does not have a neutral wire, consult a qualified electrician.
- For single-pole applications only. Do not use with 3-way or multi-way switches.
- 모든 전선 연결이 안전하고 적절하게 절연되어 있는지 확인하세요.
- 기기의 최대 전기 정격 용량을 초과하지 마십시오.
- 운영 볼륨tage: 125V, 60 Hz.
- Current Rating: 15A/1875W Resistive or General Purpose, 10A/1250W Ballast or Tungsten, ½ HP, TV-5.
설정 및 설치
This section provides instructions for installing your BN-LINK Countdown Timer Switch. Ensure power is OFF before proceeding.
패키지 내용:
- BN-LINK Countdown Timer Switch
- 월 플레이트
- 장착 나사
- 와이어 너트
필요한 도구 (포함되지 않음):
- 드라이버(십자 드라이버 및 일자 드라이버)
- 전선 스트리퍼
- 전기 테이프
- 권tag전자 테스터
설치 단계:
- 전원 끄기: 교체할 스위치를 제어하는 회로 차단기를 찾아 끄십시오. 전압계를 사용하여 전원이 꺼졌는지 확인하십시오.tag전자 테스터.
- 이전 스위치 제거: 기존 벽면 플레이트를 조심스럽게 제거하고 벽면 박스에서 기존 스위치를 나사로 풀어 분리합니다. 기존 스위치에서 전선을 분리할 때, 어떤 전선이 어떤 단자에 연결되어 있었는지 잘 기억해 두세요.
- 전선 식별: Identify the following wires in your wall box:
- 핫 와이어(라인): 일반적으로 검은색이며 회로 차단기에서 전원을 공급합니다.
- 부하 와이어: Typically black, sends power to the light/fan.
- 중성선: Typically white. A neutral wire is REQUIRED for this switch.
- 접지선: Typically green or bare copper.
- 새 스위치를 연결하세요: Connect the wires from your wall box to the BN-LINK timer switch using the provided wire nuts. Refer to the wiring diagram below.
- 연결하다 블랙 와이어 from the timer switch to the Hot Wire (Line) from the wall box.
- 연결하다 레드 와이어 from the timer switch to the 와이어 로드 from the wall box.
- 연결하다 화이트 와이어 from the timer switch to the 중성선 from the wall box.
- 연결하다 그린 와이어 from the timer switch to the 접지선 from the wall box.
- 스위치를 안전하게 보호하세요: Carefully fold the wires and push the timer switch into the wall box. Secure it with the mounting screws.
- 벽면 플레이트 설치: Attach the provided wall plate over the switch.
- 복원력 : 회로 차단기에서 전원을 다시 켜세요.
- 테스트 작업: Test the timer switch to ensure it functions correctly.

영상: Wiring diagram for the BN-LINK Countdown Timer Switch. This diagram illustrates the connection points for the ground wire (green), load wire (red), hot wire (black), and neutral wire (white) to the timer switch. A clear warning states "Neutral Wire Must Required."
작동 지침
The BN-LINK Countdown Timer Switch features intuitive touch controls for easy operation.

영상: 앞쪽 view of the BN-LINK Countdown Timer Switch, highlighting the "Touch ON/OFF Button" at the top and the six "Touch to select time" buttons (1 Min, 5 Min, 10 Min, 20 Min, 30 Min, 1 Hour). LED indicators are also shown, indicating which countdown is active.
버튼 기능:
- 전원 버튼(상단): This is the main ON/OFF button.
- Press once to turn the connected device (light/fan) ON indefinitely.
- Press again to turn the connected device OFF.
- This button can also override any active countdown timer, turning the device OFF immediately.
- Countdown Timer Buttons (1 Min, 5 Min, 10 Min, 20 Min, 30 Min, 1 Hour): These buttons activate a preset countdown.
- Press any of these buttons to turn the connected device ON for the selected duration.
- The device will automatically turn OFF once the countdown expires.
- An LED indicator next to the selected time will illuminate to show the active countdown.
Examp르 사용법:
To turn on your bathroom fan for 10 minutes, simply press the "10 Min" button. The fan will run for 10 minutes and then automatically shut off. If you need to turn it off sooner, press the top Power button.
다양한 응용 프로그램
The BN-LINK Countdown Timer Switch is suitable for a wide range of applications, enhancing convenience and energy efficiency in various areas of your home or business.

영상: A collage of four images demonstrating common applications for the timer switch: a bathroom, a closet, a laundry room, and a garage. This illustrates the versatility of the product in different environments.
- 욕실: Control exhaust fans to reduce humidity and prevent mold growth.
- Closets & Pantries: Automatically turn off lights after a set time, preventing wasted energy.
- 차고: Manage lighting or ventilation systems.
- 세탁실: Control exhaust fans or lighting.
- Spas & Enclosed Patios: Conveniently manage lighting or small ventilation units.
This timer switch is compatible with incandescent, fluorescent, and LED lighting, as well as bathroom exhaust fans and heaters within its specified electrical ratings.
유지
The BN-LINK Countdown Timer Switch requires minimal maintenance.
- 청소: 스위치 표면을 청소하려면 부드러운 천으로 살살 닦아주세요.amp 천으로 닦으세요. 연마성 세제, 용제 또는 강한 화학 물질은 마감재나 내부 구성품을 손상시킬 수 있으므로 사용하지 마세요.
- 점검: Periodically inspect the switch and wall plate for any signs of damage or loose connections. If any issues are found, turn off power at the circuit breaker and consult a qualified electrician.
- 사용자가 수리할 수 없는 부품: There are no user-serviceable parts inside the switch. Do not attempt to open or repair the unit yourself.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
Switch does not turn ON/OFF. |
|
|
Countdown timer does not activate or device stays ON indefinitely. |
|
|
LED 표시등이 작동하지 않습니다. |
|
|
Switch does not fit into the wall box. |
|
|
If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact BN-LINK Customer Support.
명세서
| 모델 번호 | CP-U211C |
| 운영 볼륨tage | 125V, 60Hz |
| 현재 평가 | 15A/1875W Resistive or General Purpose |
| Ballast/Tungsten Rating | 10A/1250W |
| 모터 등급 | ½HP |
| TV 평가 | 티비-5 |
| 스위치 유형 | 버튼식 조작 (터치 컨트롤) |
| 회로 유형 | 단극 |
| 중성선 필요 | 예 |
| 인증 | ETL 등록됨 |
| 재료 | 플라스틱, 금속 |
| 색상 | 하얀색 |
| 제품 크기(L x W x H) | 7.01 x 3.99 x 4.39cm(2.76 x 1.57 x 1.73인치) |
| 작동 온도 | 화씨 5도 ~ 화씨 122도(섭씨 -15도 ~ 50도) |
| 국제 보호 등급 | IP54 |

영상: Detailed dimensions of the BN-LINK Countdown Timer Switch and its accompanying wall plate. The image shows the height (5 inches for plate, 2.76 inches for switch body), width (3.3 inches for plate, 1.57 inches for switch body), and depth (1.73 inches for switch body).
보증 및 지원
BN-LINK products are designed to meet high-quality standards. For warranty information or technical support, please contact BN-LINK customer service.
Please have your model number (CP-U211C) and purchase date available when contacting support.
연락처 정보:
- Refer to the BN-LINK official web최신 연락처 정보는 웹사이트 또는 제품 포장에서 확인하실 수 있습니다.
- Online support may be available through the BN-LINK brand store on Amazon or their official web대지.