1. 서론
Thank you for choosing the RIGOL DS1102Z-E Digital Oscilloscope. This manual provides essential information for the safe and efficient use of your device. Please read it thoroughly before operation and keep it for future reference.
The DS1102Z-E is a high-performance digital oscilloscope designed for various applications including research and development, education, maintenance, and industrial testing. It features a 100 MHz bandwidth, 1 GSa/s sample rate, and a 24 Mpts memory depth, enabling precise analysis of complex waveforms.
2. 제품 오버view
The RIGOL DS1102Z-E is a versatile measurement instrument integrating a frequency counter and supporting protocol decoding for RS232/UART, I2C, and SPI. It also includes FFT analysis and automatic measurement functions to enhance testing efficiency.
그림 2.1: 전면 view of the RIGOL DS1102Z-E Digital Oscilloscope.
2.1 주요 특징
- 100 MHz Bandwidth, 1 GSa/s Samp르 비율: Captures signals with high precision.
- 24 Mpts Memory Depth: Allows for extended signal capture and detailed waveform analysis.
- Multi-function Measurement Device: Includes frequency counter, protocol decoding (RS232/UART, I2C, SPI), FFT analysis, and automatic measurement functions.
- Waveform Recording and Playback: Records signal variations and replays them for fault identification.
- 고화질 디스플레이: 7-inch TFT screen with 256-level grayscale, offering a phosphor-like display effect for clear waveform details.
- Remote Control & Secondary Development Support: Equipped with USB and LAN ports for PC remote control, compatible with SCPI commands, LabVIEWVisual Basic 및 Visual C++.
2.2 상자 내용물
Figure 2.2: Contents included with the DS1102Z-E Oscilloscope.
- 1x Main Unit (DS1102Z-E Digital Oscilloscope)
- 2x Passive Probes (150MHz)
- 1x Power Cable (EU plug)
- 1x USB A-B Cable
- 1x 보증 카드
- 교정 인증서 1장
- 1x Declaration of Conformity
3. 설정
Follow these steps to set up your RIGOL DS1102Z-E oscilloscope:
- 짐 풀기: Carefully remove all components from the packaging. Inspect the device for any signs of damage.
- 전원 연결: Connect the provided power cable to the oscilloscope's power input and then to a suitable AC power outlet.
- 프로브 연결: Connect the passive probes to the BNC input connectors (CH1, CH2) on the front panel. Ensure a secure connection.
- 접지: Always ensure the oscilloscope is properly grounded through the power cable.
- USB/LAN 연결(선택 사항): If you plan to use remote control or secondary development, connect the USB cable to a PC or the LAN cable to your network.
그림 3.1: 이상view of the oscilloscope's physical dimensions and ports.
4. 사용 설명서
This section covers the basic operation of your oscilloscope.
4.1 전원 켜기/끄기
- 전원 켜기: Press the power button located on the front panel. The device will perform a self-test and display the main interface.
- 전원 끄기 : 장치가 종료될 때까지 전원 버튼을 길게 누릅니다.
4.2 기본 파형 표시
After powering on, connect a signal to one of the input channels (e.g., CH1). Adjust the vertical scale (Volts/Div) and horizontal scale (Time/Div) knobs to display the waveform clearly. Use the 자동차 button for automatic setup of the waveform display.
그림 4.1: 예ample of a waveform displayed on the oscilloscope screen.
4.3 고급 기능
- 측정 기능: 를 누르세요 측정하다 button to access automatic measurements like frequency, period, peak-to-peak voltage 등
- 트리거 시스템: Use the trigger controls to stabilize repetitive waveforms. Adjust the trigger level and mode (Edge, Pulse, Video, Slope, etc.) as needed.
- 파형 기록: The oscilloscope allows recording and replaying waveforms. Access this feature through the menu to capture transient events.
- 프로토콜 디코딩: For serial bus analysis (RS232/UART, I2C, SPI), configure the decoding settings via the menu.
- FFT 분석: Perform Fast Fourier Transform (FFT) to analyze the frequency components of your signal.
Figure 4.2: Complex waveform analysis with measurement data.
Figure 4.3: Multiple waveforms displayed simultaneously for comparison.
5. 유지관리
적절한 유지 관리는 오실로스코프의 수명과 정확성을 보장합니다.
- 청소: Use a soft, dry cloth to clean the exterior of the oscilloscope. For stubborn dirt, a slightly damp 순한 세제를 묻힌 천을 사용하세요. 연마성 세제나 용제는 사용하지 마세요.
- 스크린 관리: Clean the display screen with a soft, lint-free cloth. Do not use excessive force or harsh chemicals.
- 저장: 사용하지 않을 때는 오실로스코프를 직사광선, 극한 온도 및 과도한 먼지를 피해 깨끗하고 건조한 곳에 보관하십시오.
- 프로브 관리: Handle probes carefully. Avoid bending or stressing the probe tips. Store them properly to prevent damage.
- 구경 측정: For optimal performance, periodic calibration by qualified personnel is recommended. Refer to the official RIGOL website for calibration services.
6. 문제 해결
이 섹션에서는 일반적으로 발생할 수 있는 문제에 대한 해결책을 제공합니다.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| No power when turned on. | Power cable not connected, power outlet faulty, or power button issue. | Check power cable connection. Test the power outlet. Ensure the power button is fully pressed. |
| 파형이 표시되지 않습니다. | No signal input, probe not connected correctly, vertical/horizontal scale incorrect, or trigger not set. | Verify signal source. Check probe connections. Adjust Volts/Div and Time/Div. Press 자동차 or adjust trigger settings. |
| Waveform is unstable. | 트리거 설정이 잘못되었습니다. | Adjust trigger level, mode, and source to stabilize the waveform. |
| 리모컨이 작동하지 않습니다. | USB/LAN cable issue, incorrect network settings, or software driver not installed. | Check cable connections. Verify network configuration. Install necessary drivers and software (e.g., UltraScope). |
If the problem persists, please contact RIGOL technical support.
7. 사양
Detailed technical specifications for the RIGOL DS1102Z-E Digital Oscilloscope.
Figure 7.1: Visual representation of key technical specifications.
| 특징 | 사양 |
|---|---|
| 상표 | 리골 |
| 모델 | DS1102Z-E |
| 대역폭 | 100MHz |
| 채널 | 2 Channels + EXT |
| Samp르 레이트 | 1 GSa/초 |
| 기억의 깊이 | 24 Mpts |
| 파형 포착률 | 30,000wfms/초 |
| 수직 해상도 | 8비트 |
| 최소 감도 | 1mV/디비 |
| Minimum Time Base | 2 ns/div |
| 디코딩 지원 | RS232/UART, I2C, SPI |
| FFT 분석 | 기준 |
| 표시하다 | 7-inch TFT (800x480) |
| 연결성 | USB 호스트, USB 장치, LAN |
| 전원 | AC 어댑터 |
| 색상 | 회색 / 흰색 |
| 품목 무게 | 2.9 킬로그램 |
| 치수(길이 x 너비 x 높이) | 31.31 x 16.08 x 12.24 센티미터 |
| 준수 표준 | CE, RoHS |
| 제조업체 부품 번호 | DS1102Z-E |
| 원산지 | 중국 |
8. 보증 및 지원
RIGOL is committed to providing high-quality products and excellent customer service.
- 보증: The RIGOL DS1102Z-E Digital Oscilloscope comes with a 3년 보증 구매일로부터. 이 보증은 정상적인 사용 하에서 재료 및 제조상의 결함을 포함합니다.
- 기술 지원: RIGOL offers 24/7 기술 지원 to assist you with any questions or issues you may encounter. Please refer to the official RIGOL web연락처 정보와 지원 리소스를 제공하는 사이트입니다.
- 온라인 리소스: Visit the official RIGOL website for product documentation, software updates (e.g., UltraScope), and additional support materials.
Figure 8.1: RIGOL oscilloscopes support multiple languages for user convenience.
