Sunco Lighting 4ft LED Shop Light Instruction Manual

1. 중요한 안전 정보

Please read and understand all instructions before installing or operating this fixture. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause personal injury or property damage.

• 경고: 감전 위험이 있습니다. 설치 또는 정비 전에 퓨즈나 회로 차단기의 전원을 분리하세요.
• 경고: 화재 위험. 가연성 물질을 가까이 두지 마십시오.amp.
• This fixture is intended for indoor use only. Do not use in wet locations or where directly exposed to water.
• 공급 볼륨을 확인tage is compatible with the fixture's requirements (120V-277V).
• 모든 배선 연결은 지역 및 국가 전기 규정에 따라 이루어져야 합니다. 배선에 대해 확신이 서지 않는 경우 자격을 갖춘 전기 기술자에게 문의하십시오.
• 제품을 개조하거나 분해하려고 시도하지 마십시오. 내부에는 사용자가 수리할 수 있는 부품이 없습니다.

2. 상자 안에 무엇이 들어있나요?

설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.

• LED 매장 조명 기구
• 장착 하드웨어(나사, 앵커)
• Linking Cables (1.5" and 8" for daisy-chaining)
• 와이어 너트

3. 사양

The fixture features a durable build with an impact-resistant prismatic lens for wide and consistent light dispersion.

This image illustrates key features including impact resistance, the prismatic lens design, non-dimmable functionality, and the wide voltage compatibility of 120-277V.

4. 설정 및 설치

올바른 설치를 위해 다음 단계를 따르십시오. 시작하기 전에 전원을 차단하십시오.

4.1. 설치 준비

1. 전원 끄기: 해당 설치 구역을 제어하는 ​​회로 차단기를 찾아 전원을 끄십시오.
2. 디퓨저 제거: Gently remove the prismatic diffuser from the lamp base to access the internal components.
3. 색온도(CCT)를 선택하세요: Before mounting, locate the CCT switch inside the fixture. Select your desired color temperature (4000K, 5000K, or 6000K). This setting cannot be changed easily after installation.

This image shows the internal CCT switch, allowing selection between 4000K, 5000K, and 6000K before installation.

4.2. 고정장치 장착

The fixture is designed for flush mounting to a ceiling or surface. It includes keyhole slots for easy installation.

1. 마크 장착 지점: Hold the fixture in the desired mounting location and mark the positions for the mounting screws. Ensure these align with a junction box or suitable support structure.
2. 장착 하드웨어 설치: Drill pilot holes if necessary and install the provided mounting screws, leaving a small gap for the fixture to slide onto.
3. 배선 준비: If connecting to a junction box, knock out the appropriate punch hole on the fixture's housing.

This diagram illustrates the three main steps for installation: securing the housing, connecting electrical wires, and attaching the light fixture.

4.3. 전기적 연결

1. 전선 연결: Using the provided wire nuts, connect the fixture's wires to the supply wires: Live (black) to Live, Neutral (white) to Neutral, and Ground (yellow/green) to Ground. Ensure all connections are secure.
2. 턱 와이어: Carefully tuck all wires and wire nuts into the junction box or fixture housing.

4.4. Linking Multiple Fixtures (Daisy Chain)

This fixture supports daisy-chaining to extend lighting coverage. Use the provided linking cables.

1. Connect Linking Cable: Insert one end of a linking cable into the designated port on the first fixture and the other end into the port on the next fixture.
2. 보안 연결: Ensure linking cables are securely connected and properly routed.

This image demonstrates how to daisy-chain multiple fixtures using the linking cables and highlights the knockout punch hole for electrical connections.

4.5. 최종 단계

1. 디퓨저를 다시 부착하세요: Align one end of the diffuser with the aluminum base and push it into place until it snaps securely.
2. 복원력 : Turn the circuit breaker back on to restore power to the fixture.

5. 사용 설명서

The Sunco Lighting LED Shop Light is designed for straightforward operation once installed.

5.1. Color Temperature Selection (CCT)

This fixture features a selectable color temperature (CCT) switch, allowing you to choose between 4000K (Cool White), 5000K (Daylight), and 6000K (Bright White) to suit your preference or application. The CCT switch is located inside the fixture and must be set during installation before the diffuser is reattached.

• 4000K: Provides a neutral white light, suitable for offices or general workspaces.
• 5000K: Offers a bright, crisp daylight-like illumination, ideal for tasks requiring high visibility.
• 6000K: Delivers a very bright, cool white light, often preferred for industrial settings or areas needing maximum brightness.

This image displays the internal components and wiring, emphasizing the high efficiency of the LED fixture operating within a 120-277V range.

5.2. 전원 켜기/끄기

The fixture is non-dimmable and operates via a standard wall switch connected to its power supply. Simply toggle the wall switch to turn the light on or off.

6. 유지관리

The Sunco Lighting LED Shop Light requires minimal maintenance. Always ensure power is disconnected before performing any maintenance.

• 청소: 조명기구 외부를 부드럽고 마른 천이나 약간 젖은 천으로 닦으십시오.amp cloth. Do not use harsh chemicals or abrasive cleaners, as these can damage the finish or lens.
• 점검: 조명기구에 손상, 배선 느슨함 또는 마모 흔적이 있는지 정기적으로 점검하십시오. 문제가 발견되면 전원을 차단하고 자격을 갖춘 전기 기술자에게 문의하십시오.
• 전구 교체 없음: This fixture uses integrated LEDs, meaning there are no bulbs to replace. The LEDs are designed for a long lifespan of 50,000 hours.

7. 문제 해결

If you experience issues with your LED Shop Light, refer to the following common troubleshooting steps:

• 표시등이 켜지지 않음:
  • 회로 차단기를 점검하여 전원이 켜져 있는지 확인하십시오.
  • Verify all wire connections are secure and correct.
  • 벽 스위치가 켜짐 위치에 있는지 확인하십시오.
• 불빛이 깜빡거립니다:
  • Confirm the fixture is not connected to a dimmer switch, as it is non-dimmable.
  • 느슨한 전선 연결을 확인하세요.
  • 공급 볼륨을 확인tage는 안정적이며 지정된 범위 내에 있습니다.
• 색온도가 잘못되었습니다:
  • The CCT switch must be set before installation. If the diffuser is already installed, carefully remove it to access and adjust the switch.

If these steps do not resolve the issue, contact Sunco Lighting customer support for assistance.

8. 보증 및 지원

Sunco Lighting은 자사 제품의 품질을 보장합니다.

• 보증: This product is backed by a 3-Year Warranty. Please refer to the official Sunco Lighting website or your purchase documentation for full warranty details and terms.
• 고객 지원: For technical assistance, troubleshooting, or warranty claims, please contact Sunco Lighting customer support.