HiLook IPC-B121H-C 2MP 불렛형 IP 카메라 사용 설명서

1. 서론

This manual provides detailed instructions for the installation, operation, and maintenance of the HiLook IPC-B121H-C 2MP Bullet IP Camera. This camera is designed for surveillance applications, offering 2-megapixel resolution, a 2.8mm fixed lens, 30-meter infrared night vision, and an IP67 weather-resistant rating. It supports Power over Ethernet (PoE) for simplified installation and H.265+ video compression for efficient storage.

2. 제품 오버view

The HiLook IPC-B121H-C is a compact bullet-style IP camera. Familiarize yourself with its components before installation.

이미지 2.1: 측면 view of the HiLook IPC-B121H-C 2MP Bullet IP Camera, showing the main body and integrated mounting bracket.

이미지 2.2: 앞면 view of the camera, highlighting the lens and infrared illuminators.

2.1 패키지 내용

포장을 풀 때 모든 품목이 들어 있는지 확인하세요.

• HiLook IPC-B121H-C IP Camera
• 장착 나사 및 벽면 플러그
• 장착 템플릿
• 빠른 시작 가이드(본 설명서)

2.2 카메라 구성 요소

• 렌즈: 2.8mm fixed lens for wide-angle view주고받음.
• IR LED : 최대 30미터 야간 투시용 적외선 조명 장치.
• 주택: IP67-rated metal casing for outdoor protection.
• 장착베이스: 벽이나 천장에 설치할 수 있도록 높이 조절이 가능한 브래킷입니다.
• 케이블 : Integrated Ethernet (PoE) and power input cables.

이미지 2.3: 각도 view of the camera, showing the integrated cables for power and network connection.

3. 설정

3.1 카메라 장착

1. 위치 선택: Choose a suitable wall or ceiling location that provides the desired field of view and is within reach of network cabling. Ensure the surface can support the camera's weight.
2. 장착 템플릿을 사용하십시오: Affix the provided mounting template to the chosen surface. Drill pilot holes according to the template.
3. 기지를 확보하세요: Attach the camera's mounting base to the surface using the supplied screws and wall plugs.
4. 각도 조정: Loosen the adjustment screws on the bracket to position the camera for optimal viewing. Tighten the screws once the desired angle is achieved.

이미지 3.1: 측면 view 카메라의 조절 가능한 마운팅 브래킷을 보여주는 사진입니다.

이미지 3.2: 하단 view of the camera, showing the mounting holes on the base and the cable entry point.

3.2 배선 및 전원

이 카메라는 간편한 설치를 위해 PoE(Power over Ethernet)를 지원하며, 단일 이더넷 케이블을 통해 전원과 데이터를 모두 전송할 수 있습니다.

1. PoE 연결: Connect an Ethernet cable from a PoE-enabled switch or NVR to the camera's Ethernet port. This will provide both power and network connectivity.
2. Alternative Power (if not using PoE): If PoE is not available, connect a 12V DC power adapter (not included) to the camera's power input cable. Then, connect an Ethernet cable from your network to the camera's Ethernet port.

이미지 3.3: 후면 view of the camera, showing the Ethernet and power input cables.

3.3 초기 구성

After physical installation and power-up, configure the camera for network access and video settings.

1. 네트워크 연결 : 카메라가 로컬 네트워크에 연결되어 있는지 확인하십시오.
2. 소프트웨어 설치: Install the HiLook SADP Tool or client software on a computer connected to the same network.
3. 카메라 활성화: Use the SADP Tool to discover the camera. Activate it by setting a strong password.
4. IP 주소 구성: Assign a static IP address or enable DHCP for the camera using the SADP Tool or web 인터페이스.
5. 입장 Web 인터페이스: 열기 web 웹 브라우저에 접속하여 카메라의 IP 주소를 입력하면 카메라에 접근할 수 있습니다. web interface. Log in with the newly set password.

4. 카메라 작동

4.1 라이브 View

Access the live video feed from your camera through a web browser or compatible NVR/VMS software.

• Web 브라우저: Log into the camera's web interface. Navigate to the 'Live View' 섹션으로 가서 실시간 영상 피드를 확인하세요.
• NVR/VMS: Add the camera to your Network Video Recorder (NVR) or Video Management Software (VMS) using its IP address and credentials.

4.2 기록 및 저장

Configure recording settings to capture and store video footage.

• 녹화 일정: Set up continuous recording or schedule recording based on specific times.
• 동작 감지: Configure motion detection zones and sensitivity to trigger recordings only when activity is detected.
• 저장: Recordings are typically stored on an NVR, a network-attached storage (NAS) device, or a local SD card (if supported by the camera model).

4.3 재생

Review 기록된 footage to investigate events.

• NVR/VMS Playback: Use the playback function of your NVR or VMS to browse and view 녹화된 영상.
• Web Interface Playback: Some camera models allow direct playback of footage stored on an SD card via the web 인터페이스.

4.4 야간 투시경

카메라는 저조도 환경에서 자동으로 적외선 야간 투시 모드로 전환됩니다.

• 자동 활성화 : Built-in sensors detect ambient light levels and activate the IR LEDs when necessary.
• 범위: Provides clear black and white video up to 30 meters in complete darkness.

5. 유지관리

5.1 청소

정기적인 청소는 최적의 성능과 이미지 품질을 보장합니다.

• 렌즈: Gently wipe the lens with a soft, clean, lint-free cloth. For stubborn dirt, use a lens cleaning solution. Avoid abrasive materials.
• 주택: 카메라 하우징을 청소하세요.amp 옷감. 강한 세제나 용제를 사용하지 마세요.

5.2 펌웨어 업데이트

Keep your camera's firmware updated to benefit from new features, performance improvements, and security patches.

• 업데이트 확인: Periodically visit the HiLook official website for the latest firmware versions for your specific model.
• 업데이트 절차: Follow the instructions provided with the firmware update package. Ensure a stable power supply during the update process to prevent damage.

5.3 환경 고려 사항

The camera is designed for outdoor use with an IP67 rating.

• 온도: 카메라를 지정된 온도 범위 내에서 작동하십시오.
• 수분: The IP67 rating protects against dust and water immersion up to 1 meter for 30 minutes. Ensure all cable connections are properly sealed.

6. 문제 해결

일반적인 문제와 해결 방법은 이 섹션을 참조하세요.

6.1 비디오 피드 없음

• 전원 확인: Ensure the camera is receiving power, either via PoE or a 12V DC adapter.
• 네트워크 연결 : Verify the Ethernet cable is securely connected and the network is operational. Check network indicator lights on the camera and switch.
• IP 주소: Confirm the camera's IP address is correct and not conflicting with other devices on the network. Use the SADP Tool to verify.

6.2 이미지 품질이 좋지 않음

• 깨끗한 렌즈: Dust or smudges on the lens can degrade image quality. Refer to Section 5.1 for cleaning instructions.
• 조명 조건: Ensure adequate lighting. If in low light, verify IR LEDs are functioning.
• 집중하다: While this camera has a fixed lens, ensure it is not obstructed.

6.3 Network Access Issues

• 핑 테스트: From a computer on the same network, try to ping the camera's IP address to confirm network connectivity.
• 방화벽: Ensure no firewall settings are blocking communication with the camera.
• 라우터/스위치: Restart your network router or switch.

6.4 공장 초기화

If issues persist, a factory reset may resolve them. Consult the HiLook support website or product documentation for the exact reset procedure for your model, as it often involves a physical button or specific software steps.

7. 사양

Detailed technical specifications for the HiLook IPC-B121H-C 2MP Bullet IP Camera.