소개
Welcome to the world of Carrera GO!!! Max Competition. This race track set, model 20062574, offers an exciting Formula 1 racing experience with 1:43 scale cars and dynamic track elements. This manual provides essential information for assembly, operation, maintenance, and troubleshooting to ensure optimal performance and enjoyment of your race track.
For additional information and products, please visit the official Carrera web대지: www.carrera-toys.com
안전 정보
Please read all safety instructions carefully before operating the race track. Failure to follow these instructions may result in injury or damage to the product.
- This product is suitable for children aged 6 years and older. Adult supervision is recommended.
- 질식 위험을 방지하기 위해 작은 부품을 어린이의 손이 닿지 않는 곳에 보관하세요.
- Ensure all electrical connections are secure and dry. Do not operate the track near water.
- Only use the power adapter supplied with the set.
- Do not modify the track or cars in any way not specified by the manufacturer.
- Disconnect the power supply when the track is not in use or during assembly/disassembly.
설정 및 조립
패키지 내용
Before starting assembly, verify that all components are present. Refer to the "IN THE BOX" diagram below.
Figure 1: Contents of the Carrera GO!!! Max Competition Race Track Set. Includes two Formula 1 cars, track sections, speed controllers, and accessories.
- 2 x Carrera GO!!! Formula 1 Slot Cars (Mercedes-AMG F1 W14 E Performance "L. Hamilton" and Red Bull Racing RB19 "M. Verstappen")
- 2 x Speed Controllers with Turbo Button
- Track sections (straight tracks, curves, looping action, junction, lap counter)
- Power Supply (CEE 7/16 Europlug)
- 트랙 장애물 및 지지대
- 사용 설명서
트랙 어셈블리
The Carrera GO!!! Max Competition set features a track length of 6.3 meters (20.67 ft) and an assembled dimension of approximately 175 x 122 cm (5.74 x 4.00 ft). Assembly typically takes about 30 minutes.
- 적합한 위치를 선택하세요: Select a flat, stable surface large enough for the track layout.
- Connect track sections: Carefully connect the track pieces by sliding the connectors together. Ensure a snug fit for good electrical contact. Refer to the assembly diagram for the standard layout.
- Install special track elements: Integrate the looping action, junction, and lap counter as shown in the diagram. Use supports for elevated sections like the loop.
- Attach track barriers: Secure the red track barriers to the outer edges of curves to prevent cars from derailing.
- Connect power and controllers: Plug the power supply into the connection track section. Connect the two speed controllers to the designated ports on the connection track.
- Place cars on track: Position the slot cars onto the track, ensuring the guide keels are correctly seated in the track slot.
Figure 2: Standard track layout and assembly information for the Carrera GO!!! Max Competition set.
The set allows for multiple track layout options to enhance your racing experience. Experiment with different configurations as shown in the "Race Track Options" diagram.
그림 3: 예amples of multiple race track layout options.
작동 지침
Once assembled, the race track is ready for immediate use. The set is designed for up to two players.
Figure 4: The included Formula 1 cars and speed controllers.
- 전원 켜기: 전원 어댑터를 벽면 콘센트에 꽂으세요.
- 레이싱 시작: Use the hand controller to control the speed of your car. Press the trigger to accelerate.
- 터보 부스트: Each controller is equipped with a turbo button. Press this button for a temporary burst of speed, useful for overtaking or navigating straight sections. Use with caution on curves to avoid derailing.
- 랩 카운터: The integrated lap counter will automatically record the laps completed by the cars.
팁: Practice controlling your car's speed, especially around corners and through the loop, to master the track and prevent derailing.
General Carrera Track Demonstration
The following video demonstrates general operation principles of a Carrera track set. While it features a different model (Carrera First Mario Kart), the basic concepts of car placement, controller use, and track interaction are similar.
Video 1: Demonstration of a Carrera track set, showing cars racing and controller usage. This video is for a Carrera First Mario Kart set and illustrates general track operation.
유지
- 트랙 청소: Regularly wipe the track rails with a clean, dry, lint-free cloth to remove dust and debris. This ensures good electrical contact for the cars.
- 자동차 정비: Check the car's guide keel and contact brushes periodically. Replace worn brushes to maintain optimal performance. Ensure the wheels are clean and free of hair or fibers.
- 저장: 사용하지 않을 때는 트랙과 차량을 건조하고 먼지 없는 곳에 보관하십시오. 장기간 보관할 경우 트랙을 조심스럽게 분해하십시오.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 차가 움직이지 않거나 아주 천천히 움직입니다. |
|
|
| Car frequently derails. |
|
|
| Lap counter not working. |
|
|
명세서
- 모델 번호: 20062574
- 상표: 카레라
- 규모: 1시 43분
- 트랙 길이: 6.3 미터(20.67피트)
- 조립 후 크기 (길이 x 너비 x 높이): 175 x 122 x 40 cm (approx. 5.74 x 4.00 ft)
- 전원: Electric with cord (CEE 7/16 Europlug)
- 플레이어 수: 2
- 추천 연령: 6세 이상
- 조립 시간: 약 30분
- 무게: 2.5kg
- 교육 목표: Hand-eye coordination, Concentration, Strategic thinking
- 특별 기능: Authentic Formula 1 experience, Turbo button on controllers, Looping action, Junction, Lap counter.
보증 및 지원
This Carrera GO!!! Max Competition Race Track Set comes with a 2년 제조사 보증보증 청구를 위해 구매 증빙 서류를 보관하세요.
For technical support, spare parts, or further inquiries, please contact Carrera customer service or visit their official web대지: www.carrera-toys.com.
EU 내에서 예비 부품 공급은 1년간 보장됩니다.