체럽 WST-675

Cherub WST-675 CAB Tuner Instruction Manual

모델: WST-675

소개

The Cherub WST-675 CAB Tuner is a modern, rechargeable clip-on tuner designed for various musical instruments. It features a clear display and multiple tuning modes to ensure accurate pitch for your instrument. This manual provides detailed instructions for its setup, operation, maintenance, and troubleshooting.

앞쪽 view of the Cherub WST-675 CAB Tuner, showing its display with tuning indicators and the Cherub logo.

This image displays the front of the Cherub WST-675 CAB Tuner, highlighting its clear digital display. The display shows tuning information, including the note being played, deviation from the target pitch, and the A4 reference frequency. The tuner's compact design and clip mechanism are visible.

설정

Charging the Tuner

  1. Locate the USB-C charging port on the tuner.
  2. Connect the included USB-C charging cable to the tuner and a compatible USB power source (e.g., computer USB port, USB wall adapter).
  3. The battery indicator on the display will show charging status. A full charge typically provides approximately 10 hours of operating time.

Attaching to Your Instrument

  1. Gently open the clip mechanism of the tuner.
  2. Attach the tuner securely to the headstock of your guitar, bass, ukulele, or other stringed instrument. Ensure the piezo sensor makes good contact with the instrument for accurate vibration detection.
  3. 최적의 화면을 위해 디스플레이 각도를 조정하세요. view주고받음.
Cherub WST-675 CAB Tuner clipped onto the headstock of an acoustic guitar, with its display showing a green indicator for in-tune.

Here, the Cherub WST-675 CAB Tuner is shown in practical use, clipped securely to the headstock of an acoustic guitar. The display is illuminated, indicating a note is being tuned, with a green light suggesting the string is in tune. This illustrates how the tuner attaches and provides visual feedback during tuning.

작동 지침

전원 켜기/끄기

  • 전원을 켜려면 파워/셀 button located on the back of the tuner.
  • 전원을 끄려면 파워/셀 button again. The tuner also features an automatic shut-off function to conserve battery power after a period of inactivity.

Selecting Tuning Modes

  • 를 누르세요 파워/셀 button briefly to cycle through the available tuning modes:
    • Chromatic (C): For tuning any instrument to any note.
    • 기타 (G): Standard guitar tuning.
    • Guitar with Compensation (GC): An exclusive mode for guitar tuning that accounts for harmonic nuances during play.
    • 베이스(B): Standard bass tuning.
    • Ukulele (U): Standard ukulele tuning.

기준 피치(A4) 조정

  • 를 누르세요 형용사 button to adjust the A4 reference pitch. The range is typically from 431 Hz to 449 Hz.

플랫 튜닝

  • In Guitar or Bass modes, you can use the 형용사 button to select flat tuning options (b, bb, bbb) if desired.

악기 조율하기

  1. 악기의 줄 하나를 튕겨 보세요.
  2. 화면에는 음표 이름과 음표가 플랫, 샤프 또는 정확한 음정인지를 나타내는 미터가 표시됩니다.
  3. Adjust your instrument's tuning peg until the needle on the display is centered and the indicator light turns green (or similar 'in-tune' indication).
뒤쪽 view of the Cherub WST-675 CAB Tuner, showing the 'ADJ' and 'Power/SEL' buttons, model number, and reset pinhole.

The back of the Cherub WST-675 CAB Tuner is shown, featuring the 'ADJ' button for adjustments and the 'Power/SEL' button for power and mode selection. The model number 'WST-675 CAB TUNER' is printed clearly, along with a small reset pinhole. This view is essential for understanding button functions.

유지

청소

  • 튜너를 부드럽고 마른 천으로 닦으십시오. 액체 세척제나 연마제를 사용하지 마십시오.

배터리 관리

  • To prolong battery life, avoid fully discharging the battery frequently. Recharge when the low battery indicator appears.
  • If storing the tuner for an extended period, ensure it has a partial charge (around 50%) and recharge it every few months.

저장

  • 튜너는 직사광선과 극한 온도 변화를 피해 서늘하고 건조한 곳에 보관하십시오.

문제 해결

Tuner Does Not Power On

  • Ensure the battery is charged. Connect the tuner to a USB power source using the provided cable.
  • 를 누르고 계세요 파워/셀 버튼을 몇 초간 눌러주세요.

Inaccurate Tuning

  • Check that the tuner is securely clipped to the instrument's headstock, ensuring good contact for vibration detection.
  • Verify that the correct tuning mode (Chromatic, Guitar, Bass, Ukulele) is selected for your instrument.
  • Ensure there is no excessive background noise that might interfere with the tuner's sensor.
  • Try resetting the tuner by inserting a small pin into the reset pinhole on the back.

화면이 응답하지 않습니다

  • 배터리를 충전하세요.
  • Perform a reset using the pinhole.

명세서

모델 번호WST-675
튜닝 범위A0(27.5Hz) ~ C8(4186.0Hz)
튜닝 모드Chromatic, Guitar (Standard), Guitar (with compensation), Bass, Ukulele
검출 방법Piezo sensor (fixed and flexible pliers)
플랫 튜닝b, bb, bbb
기준 피치A4 = 431 to 449 Hz
튜닝 정확도±1센트
전원 공급 장치Rechargeable Li-ion battery (3.7V, 180mAh)
작동 시간약 10시간
커넥터충전을 위한 USB-C
치수49 x 26 x 40mm
품목 무게2.82 온스
색상회색

보증 정보

Cherub products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Cherub web사이트. 보증 청구에 대비해 구매 증빙 자료로 구매 영수증을 보관하세요.

고객 지원

If you encounter any issues or have questions regarding your Cherub WST-675 CAB Tuner that are not covered in this manual, please contact Cherub customer support. You can typically find contact information on the official Cherub web사이트나 제품 판매점을 통해 구매하세요.

© 2024 Cherub Technology. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.