1. 서론
The DJI Focus Pro LiDAR is an advanced ranging system designed to enhance autofocus capabilities for professional video production. It features a high density of ranging points and an extended maximum focus distance, making it suitable for various shooting scenarios, including those involving moving subjects and telephoto lenses. This device is compatible with DJI RS 4 Pro, DJI RS 3 Pro, and DJI Focus Pro Grip, and can enable autofocus for calibrated manual lenses when paired with the DJI Focus Pro Motor.
2. 상자 안에 무엇이 들어있나요?
다음 품목이 모두 패키지에 포함되어 있는지 확인하세요.
- Focus Pro LiDAR × 1
- 멀티 카메라 제어 케이블(USB-C, 30cm) × 1
3. 제품 오버view
The DJI Focus Pro LiDAR unit is a compact device designed for precise distance measurement and autofocus assistance. It features a front-facing lens for ranging and a hot shoe mount for attachment to compatible camera setups.
The rear of the unit includes various ports and controls for operation and connectivity.
4. 설정
To set up your DJI Focus Pro LiDAR, follow these steps:
- 설치: Attach the LiDAR unit to your compatible DJI RS 4 Pro, DJI RS 3 Pro, or DJI Focus Pro Grip using its integrated hot shoe mount. Ensure it is securely fastened.
- 연결: Use the provided Multi-Camera Control Cable (USB-C, 30 cm) to connect the LiDAR to your stabilizer or grip. Refer to your stabilizer's manual for specific port locations.
- 전원 켜기: Power on your stabilizer or grip. The LiDAR unit will power on automatically.
5. 사용 설명서
The DJI Focus Pro LiDAR provides advanced autofocus capabilities. Here are key operational aspects:
- Ranging Performance: The LiDAR features 76,800 ranging points, significantly improving edge detection for human subjects and reducing focus hunting. It offers a maximum focus distance of 20 meters.
- 분야 View (시야): The 70° FOV is optimized for capturing edge compositions and close-up shots, providing a wider area for focus detection.
- 새로 고침 빈도: A 30 Hz LiDAR refresh rate ensures rapid subject information collection, which is crucial for maintaining confident focus on moving subjects.
- Autofocus with Manual Lenses: When paired with the DJI Focus Pro Motor, the LiDAR can enable autofocus functionality for manual lenses that have undergone calibration.
- Focus Distance Extension (2x Zoom): By default, the LiDAR's ToF sensor operates within a 10-meter sensing range when the stabilizer's screen is in 1x mode. To extend the focus distance up to 20 meters, tap the '+' icon on the stabilizer's screen to activate the 2x zoom display mode.
6. 유지관리
Proper maintenance ensures the longevity and optimal performance of your DJI Focus Pro LiDAR:
- 청소: Use a soft, dry cloth to clean the exterior of the LiDAR unit. For the lens, use a specialized lens cleaning cloth and solution. Avoid abrasive materials or harsh chemicals.
- 저장: Store the LiDAR in a cool, dry place away from direct sunlight and extreme temperatures. Use a protective case when transporting the unit to prevent damage.
- 손질: Avoid dropping or subjecting the unit to strong impacts. Do not attempt to disassemble the unit, as this will void the warranty.
7. 문제 해결
If you encounter issues with your DJI Focus Pro LiDAR, consider the following common solutions:
- LiDAR Not Powering On: Ensure the Multi-Camera Control Cable is securely connected to both the LiDAR and the stabilizer/grip. Verify that the stabilizer/grip is powered on and has sufficient battery.
- 자동 초점이 작동하지 않음: Check if the LiDAR is properly connected and recognized by your stabilizer. If using a manual lens, ensure it has been calibrated and that the DJI Focus Pro Motor is correctly installed and connected. Confirm that the autofocus mode is enabled on your stabilizer's screen.
- Inaccurate Focusing: Clean the LiDAR lens to ensure no obstructions are interfering with its ranging capabilities. Ensure there are no reflective surfaces directly in front of the LiDAR that could cause interference.
- Limited Focus Range: If experiencing a limited focus range (e.g., 10 meters), ensure the 2x zoom display mode is activated on your stabilizer's screen to extend the range to 20 meters.
If problems persist, contact DJI Support for further assistance.
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | 6941565981103 |
| 치수(D x W x H) | 3.84인치 x 2.66인치 x 2.21인치 |
| 품목 무게 | 140그램 |
| 색상 | 슈바르츠(검은색) |
| 호환 장치 | DJI RS 4 Pro, DJI RS 3 Pro, DJI Focus Pro Grip |
| Ranging Points | 76,800 |
| Max Focus Distance | 20 미터 |
| 분야 View (시야) | 70° |
| LiDAR Refresh Rate | 30Hz |
| 연속 촬영 속도 | 30프레임 |
9. 보증 및 지원
The DJI Focus Pro LiDAR is covered by a warranty provided by DJI. For specific warranty terms and conditions, please refer to the official DJI web사이트에 접속하거나 제품에 포함된 보증 카드를 확인하세요.
For technical support, troubleshooting assistance, or service inquiries, please visit the official DJI Support page or contact their customer service directly. Keep your proof of purchase and product serial number readily available when seeking support.
온라인 지원: www.dji.com/support