SANUS OLF22 Full-Motion TV Wall Mount and HTBS Adjustable Height Speaker Stands Instruction Manual

소개

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your SANUS OLF22 Premium Full-Motion TV Wall Mount and HTBS Adjustable Height Satellite Speaker Stands. Please read all instructions carefully before beginning installation and retain this manual for future reference.

안전 정보

경고: Failure to read and follow these instructions can result in serious personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, contact SANUS Customer Care.

구조적으로 불안정한 벽에는 이 제품을 설치하지 마십시오.
설치 표면이 마운트와 TV의 총 무게를 견딜 수 있는지 확인하십시오.
Always use a stud finder to locate wood studs or consult a qualified professional for concrete/masonry installations.
TV 거치대의 최대 하중 용량인 150파운드(68kg)를 초과하지 마십시오.
설치하는 동안 어린이의 접근을 차단하세요.

패키지 내용

Verify that all components are present and undamaged before installation. If any parts are missing or defective, contact SANUS Customer Care.

TV Wall Mount Components (OLF22)

벽판 조립체
TV 브래킷 암
장착 하드웨어(다양한 나사, 와셔, 스페이서)
케이블 관리 타이

Speaker Stand Components (HTBS)

베이스 플레이트
Adjustable Height Poles
Speaker Platforms/Mounting Adapters
조립 하드웨어

설정 및 설치

TV Wall Mount (OLF22) Installation

벽 준비: Locate wall studs using a stud finder. Mark the desired height and center of your TV on the wall. Ensure the area is free of electrical wires or plumbing.
벽면 플레이트 부착: Position the wall plate assembly at the marked location. Use a level to ensure it is straight. Secure the wall plate to two adjacent wood studs using the provided lag bolts. For concrete or masonry walls, use appropriate anchors (sold separately) and consult a professional.
TV 브라켓 부착: Secure the TV bracket arms to the back of your television using the appropriate screws, washers, and spacers from the included hardware kit. Ensure the brackets are centered and level on the TV.
벽면 마운트 플레이트에 TV를 고정하세요: Carefully lift the TV with the attached brackets and hook them onto the wall plate assembly. Secure the TV to the mount using the safety screws or locking mechanisms provided.
케이블 관리 : Use the included cable management ties to route and secure cables along the mount arms, preventing tangles and ensuring a clean appearance.

Image: Man adjusting a TV mounted on a SANUS full-motion wall mount, demonstrating smooth extension and tool-free adjustments.

Image: Close-up of the SANUS TV wall mount showing cables neatly managed with ties along the articulating arms.

Adjustable Height Speaker Stands (HTBS) Assembly

기둥을 받침대에 부착하세요: Secure the lower adjustable pole to the base plate using the provided screws.
스피커 플랫폼 부착: Connect the speaker platform or mounting adapter to the top of the upper adjustable pole.
높이 조정: Insert the upper pole into the lower pole. Adjust the height between 28 inches and 38 inches to your desired listening level. Secure the height adjustment mechanism.
스피커 장착: Place your satellite or small bookshelf speakers onto the platforms or attach them using the appropriate adapters for your speaker model.

Image: Components of the SANUS speaker stand laid out for easy 3-step assembly, including base, poles, and various speaker mounting hardware.

작동 지침

Adjusting the TV Wall Mount

확대: Gently pull the TV screen forward to extend the mount up to 22 inches from the wall.
받침: Pivot the TV left or right up to 70 degrees for optimal view다양한 각도에서 중.
경사: Adjust the vertical angle of the TV screen (up or down) to reduce glare or achieve a preferred viewing angle. The OLF22 features tool-free tilt adjustments.
취소: Push the TV gently back towards the wall until it rests at its slim profile 벽에서 2.5인치 떨어져 있습니다.

간접비 view of a TV mounted on a SANUS full-motion mount, demonstrating its ability to swivel up to 70 degrees.

이미지: 오버헤드 view of a TV mounted on a SANUS full-motion mount, demonstrating its ability to swivel up to 70 degrees.

옆 view of a TV mounted on a SANUS wall mount, showing it extended 22 inches from the wall and its slim 2.5-inch retracted depth.

이미지: 측면 view of a TV mounted on a SANUS wall mount, showing it extended 22 inches from the wall and its slim 2.5-inch retracted depth.

Adjusting Speaker Stand Height

To adjust the height of the speaker stands, loosen the locking mechanism on the adjustable pole.
Slide the upper pole to the desired height between 28 and 38 inches.
Tighten the locking mechanism securely to prevent the pole from slipping.

Close-up of a SANUS speaker stand showing the tool-free height adjustment mechanism, with an arrow indicating adjustment range from 28 to 38 inches.

Image: Close-up of a SANUS speaker stand showing the tool-free height adjustment mechanism, with an arrow indicating adjustment range from 28 to 38 inches.

Image: Two SANUS adjustable height speaker stands positioned in a living room setup with a TV and soundbar, demonstrating their use.

유지

청소: Wipe the mount and stands with a soft, dry cloth. Do not use abrasive cleaners or solvents.
정기 점검: 모든 나사와 볼트가 단단히 조여져 있는지 주기적으로 확인하고, 필요한 경우 다시 조이십시오.
움직임: If the TV mount movement becomes stiff, apply a small amount of silicone-based lubricant to the articulating joints.

문제 해결

TV Wall Mount Issues

TV 수평이 안 맞음: Check the wall plate and TV bracket arms for levelness. Adjust as needed. Some mounts have post-installation leveling adjustments.
마운트가 느슨해진 느낌: Ensure all wall mounting bolts and TV attachment screws are securely tightened. Do not overtighten.
Difficulty moving TV: Check for any obstructions. Ensure cables are not caught in the articulating arms. If movement is stiff, apply lubricant as per maintenance instructions.

Speaker Stand Issues

Stands are wobbly: Ensure all assembly screws are tightened. Check that the base is on a flat, stable surface.
Height adjustment slips: Ensure the height locking mechanism is fully engaged and tightened.

명세서