CREWORKS 미니 금속 선반 9" x 24" 사용 설명서

1. 서론

Thank you for choosing the CREWORKS 9" x 24" Mini Metal Lathe. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your new machine. Please read this manual thoroughly before operating the lathe to ensure proper use and to prevent injury or damage.

Figure 1.1: CREWORKS 9" x 24" Mini Metal Lathe with included accessories.

2. 안전 지침

기계를 작동할 때는 항상 안전을 최우선으로 고려해야 합니다. 이 지침을 따르지 않을 경우 심각한 부상이나 사망에 이를 수 있습니다.

• 매뉴얼을 읽어보세요: 작동 전에 모든 지침과 경고를 이해하세요.
• 개인 보호 장비(PPE): Always wear safety glasses or a face shield. Use hearing protection. Do not wear loose clothing, gloves, ties, or jewelry that can get caught in moving parts. Tie back long hair.
• 작업 영역: Keep the work area clean, well-lit, and free from clutter. Ensure adequate space around the machine.
• 기계 상태: 선반을 사용하기 전에 손상이나 헐거워진 부품이 있는지 점검하십시오. 손상된 경우 작동하지 마십시오.
• 전원 연결: Ensure the machine is properly grounded. Disconnect power before making adjustments, changing tools, or performing maintenance.
• 작업물 보안: 항상 작업물이 안전하게 고정되어 있는지 확인하십시오.amp척이나 콜릿에 고정됩니다.
• 칩 제거: Never remove chips by hand while the machine is running. Use a brush or hook.
• 비상 정지 : 비상 정지 버튼의 위치와 작동 방법을 숙지하세요.
• 감독: 기계가 작동 중인 동안에는 기계를 혼자 두지 마십시오.

그림 2.1: 이상view of the lathe components, including the emergency stop button.

3. 구성 요소 및 제어

Understanding the various parts of your lathe is crucial for effective and safe operation.

3.1 주요 구성 요소

• 헤드스탁: Houses the main spindle, motor, and gear train.
• 척: Holds the workpiece securely. The CREWORKS lathe features a 3-jaw chuck.
• 마차: Moves along the bed, carrying the cross slide and tool post.
• Cross Slide: Moves perpendicular to the bed, allowing for facing operations.
• Compound Rest: Rotates and slides to allow for angled cuts and fine adjustments.
• 도구 게시물: Holds the cutting tools.
• 테일스톡: Supports the end of long workpieces or holds drilling/reaming tools.
• 침대: The main frame of the lathe, providing precision guide rails for the carriage and tailstock.
• 리드 스크류: Used for automatic feeding and threading operations.

3.2 컨트롤

• Power and Emergency Stop: Main power switch and immediate shutdown button.
• 정방향/역방향 스위치: Controls spindle rotation direction.
• 속도 조절 손잡이: Varies the spindle speed.
• 디지털 속도 표시: Shows the current spindle RPM.
• 캐리지 핸드휠: Manual movement of the carriage along the bed.
• 크로스 슬라이드 핸드휠: Manual movement of the cross slide.
• Compound Control Wheel: Manual movement of the compound rest.
• Tail Feed Handwheel: Advances the tailstock quill.
• Half Nut Lever: Engages the lead screw for threading.

Figure 3.1: Detailed diagram showing the main components and controls of the lathe.

Figure 3.2: The digital display provides real-time spindle speed readings.

Figure 3.3: The 5-inch 3-jaw chuck is adaptable for various workpiece sizes.

4. 설정

4.1 포장 풀기 및 배치

1. Carefully remove the lathe and all accessories from the packaging. Retain packaging for future transport or storage.
2. Clean off any protective grease or oil from the machine surfaces using a suitable degreaser.
3. Place the lathe on a sturdy, level workbench capable of supporting its weight (approximately 159 lbs / 72 kg). Ensure the workbench is stable and does not wobble.
4. Secure the lathe to the workbench using appropriate fasteners through the mounting holes in the base.

4.2 초기 점검

• Verify all moving parts move freely without excessive play or binding.
• 모든 고정장치가 단단히 고정되어 있는지 확인하세요.
• Ensure the chuck guard is properly installed and functions correctly.
• 전원 코드를 접지된 전기 콘센트에 연결합니다.

5. 운영

5.1 기본 작업

1. 전원 켜기: Turn on the main power switch. The digital display should illuminate.
2. 공작물 장착: Open the chuck jaws using the chuck key. Insert the workpiece, ensuring it is securely centered and clamped. Remove the chuck key before starting the machine.
3. 도구 설치: Loosen the tool post locking screw. Insert the cutting tool, ensuring it is at the correct height relative to the workpiece center. Tighten the locking screw.
4. 속도 조정 : Use the speed adjustment knob to set the desired spindle RPM. The digital display will show the current speed. The lathe supports speeds from 0 to 3000 rpm.
5. Spindle Direction: Select forward or reverse rotation using the direction switch.
6. 참여 피드: For manual operation, use the carriage, cross slide, and compound handwheels. For automatic feed or threading, engage the half-nut lever (refer to threading charts for gear setup).
7. 절단: Slowly advance the cutting tool into the workpiece. Monitor the cut and adjust feed rate as needed.
8. 전원 끄기 : After completing the operation, turn off the spindle, then the main power switch.

5.2 응용 프로그램

This mini metal lathe is versatile and can perform various operations on materials such as wood, plastics, brass, and aluminum.

• 선회: Reducing the diameter of a workpiece.
• 깃 달기: Creating a flat surface on the end of a workpiece.
• 교련: Creating holes along the center axis using the tailstock.
• 스레딩: Cutting external or internal threads.
• 절단: Parting off sections of material.

Figure 5.1: The lathe is suitable for a wide range of metalworking and other material applications.

6. 유지관리

Regular maintenance ensures the longevity and precision of your CREWORKS Mini Metal Lathe.

6.1 청소

• 매 사용 후 기계, 특히 베드웨이, 리드 스크류, 척에 묻은 모든 부스러기와 이물질을 깨끗이 청소하십시오. 브러시나 작업용 진공청소기를 사용하십시오.
• 깨끗한 천으로 모든 표면을 닦으세요.

6.2 윤활

• Regularly apply a thin coat of machine oil to the bedways, lead screw, and other sliding surfaces to prevent rust and ensure smooth operation.
• Consult the lubrication points diagram (if available in a more detailed manual) for specific oiling requirements.

6.3 Adjustments and Inspections

• Periodically check the tension of the drive belts.
• Inspect the chuck jaws for wear or damage.
• Ensure the tailstock is aligned correctly.
• Check the condition of the metal gear set for any signs of wear or damage.

Figure 6.1: The dual V-shaped guide rails require regular cleaning and lubrication for smooth and precise operation.

Figure 6.2: The metal gear set ensures strong and efficient power transmission and should be inspected periodically.

7. 문제 해결

이 섹션에서는 선반에서 발생할 수 있는 일반적인 문제에 대해 설명합니다.

8. 사양

Technical specifications for the CREWORKS 9" x 24" Mini Metal Lathe.

Figure 8.1: Visual representation of key specifications and dimensions.

9. 보증 및 지원

For warranty information or technical support, please refer to the contact details provided at the point of purchase or visit the official CREWORKS web대지.

• 고객 지원: For assistance with product issues, setup, or operation, please contact CREWORKS customer service.
• 보고: 이 제품은 일반적으로 30일 이내 간편 반품 정책이 적용됩니다. 자세한 반품 조건은 구매 내역을 확인해 주세요.

메모: Any unauthorized modifications or repairs to the machine may void the warranty.