CREWORKS 2L 디지털 초음파 세척기 사용 설명서

1. 서론

Thank you for choosing the CREWORKS 2L Digital Ultrasonic Cleaner. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your device. Please read it thoroughly before first use and keep it for future reference.

2. 안전 지침

부상이나 장치 손상을 방지하려면 항상 다음 안전 예방 조치를 준수하세요.

• 장치를 분해하지 마십시오.
• 무인으로 사용하지 마십시오.
• Always use sufficient fluid in the tank.
• Unplug before filling or draining.
• 탱크에 액체가 없는 상태에서 제품을 작동하지 마십시오.
• 어린이의 손이 닿지 않는 곳에 보관하세요.
• 본체를 물이나 기타 액체에 담그지 마십시오.
• Use only appropriate cleaning solutions. Avoid flammable or corrosive liquids.
• 전원 코드가 손상되지 않았는지, 접지된 콘센트에 제대로 연결되어 있는지 확인하세요.

Figure 2.1: The CREWORKS 2L Digital Ultrasonic Cleaner with its warning label, emphasizing safety precautions.

3. 제품 오버view 및 기능

The CREWORKS 2L Digital Ultrasonic Cleaner is designed for efficient and thorough cleaning of various items using ultrasonic technology. It features a durable stainless steel tank, digital controls, and multiple cleaning modes.

3.1 주요 특징

• 2L 용량: Suitable for a wide range of items.
• 60W Ultrasonic Power: Provides effective cavitation for deep cleaning.
• 100W Heating Function: Allows for temperature adjustment (20-80℃) to enhance cleaning.
• 디지털 제어: Intuitive panel for setting time (0-99 min) and temperature.
• Degassing Mode: Eliminates gas bubbles for improved cavitation efficiency.
• 7 Levels of Oscillation: Adjustable intensity for delicate to robust cleaning.
• 조용한 작동: Thick tank design reduces noise to below 60 dB.
• 3가지 청소 모드: Quick, Standard, and Deep for varied cleaning needs.
• 304 Stainless Steel Tank: Ensures durability and food-grade safety.
• Transparent Acrylic Lid: 청소 과정을 실시간으로 관찰할 수 있습니다.

Figure 3.1: Close-up of the digital control panel, highlighting the time and temperature displays, and control buttons.

Figure 3.2: Illustration of the ultrasonic cleaning principle, showing the formation, expansion, and bursting of microscopic bubbles for effective cleaning.

4. 설정

Follow these steps to set up your ultrasonic cleaner:

1. 짐 풀기: Carefully remove the unit from its packaging. Inspect for any damage.
2. 놓기: Place the cleaner on a stable, flat, and dry surface, away from heat sources and direct sunlight. Ensure adequate ventilation.
3. 전원 연결: Connect the power cord to the unit and then to a grounded electrical outlet. Ensure the power switch is in the OFF position before plugging in.
4. 탱크 채우기: Open the lid and fill the stainless steel tank with the appropriate cleaning solution. Ensure the liquid level is between the MIN and MAX marks. Do not overfill or underfill.
5. 장바구니에 담기: 청소 바구니를 사용할 경우, 탱크 안에 넣으십시오.

Figure 4.1: The ultrasonic cleaner with its lid open, showing the stainless steel tank and the included cleaning basket.

5. 사용 설명서

Operating your CREWORKS ultrasonic cleaner is straightforward:

5.1 기본 작업

1. 전원 켜기: Turn on the main power switch located at the back or side of the unit. The digital display will illuminate.
2. 물품 배치: Carefully place the items to be cleaned into the cleaning basket, ensuring they are fully submerged in the solution but not touching each other or the tank bottom directly.
3. 설정 온도(선택 사항): Press the "T/°C" button to adjust the desired cleaning temperature (20-80℃) using the up/down arrows. Heating will begin automatically.
4. 시간 설정: Use the "TIME" up/down arrows to set the cleaning duration (0-99 minutes).
5. 모드 선택 (선택 사항): Choose from "QUICK" (5 min), "STD" (15 min), or "EXT" (30 min) preset modes if desired.
6. 청소 시작: Press the "START" button to begin the ultrasonic cleaning cycle. The display will show the remaining time.
7. 사이클 종료: 타이머가 0에 도달하면 장치가 자동으로 멈춥니다.
8. 항목 제거: Carefully remove the cleaning basket and rinse the cleaned items under clean water.
9. 전원 끄기 : Turn off the main power switch and unplug the unit when not in use.

5.2 Degassing Mode

The Degassing mode removes air bubbles from the cleaning solution, which can interfere with ultrasonic cavitation, making the cleaning process more efficient, especially with new solutions. Press the "DEGAS" button to activate this mode. It is recommended to run degassing for a few minutes before starting a cleaning cycle with fresh solution.

Figure 5.1: Visual representation of the degassing process, where air bubbles are removed from the cleaning solution to optimize ultrasonic performance.

5.3 Adjustable Oscillation

The unit offers 7 levels of oscillation intensity. This allows you to select a gentler cleaning for delicate items or a more powerful one for heavily soiled objects. Adjust the oscillation intensity using the dedicated knob or buttons on the control panel, if available, or by selecting the appropriate cleaning mode.

Figure 5.2: Illustration demonstrating the 7-level oscillation adjustment, allowing users to customize cleaning intensity for various items, from delicate jewelry to robust tools.

6. 유지관리 및 관리

적절한 유지 관리는 초음파 세척기의 수명과 최적의 성능을 보장합니다.

• 탱크 배수: After each use, especially if the solution is dirty, unplug the unit and carefully drain the liquid from the tank.
• 탱크 청소: Wipe the inside of the tank with a soft cloth. For stubborn residues, use a mild detergent and rinse thoroughly. Do not use abrasive cleaners.
• 외부 청소: 광고로 장치의 외부를 닦습니다.amp 천. 독한 화학 물질을 사용하지 마십시오.
• 저장: Store the unit in a cool, dry place when not in use. Ensure the tank is empty and dry.
• 정기 검사: 주기적으로 전원 코드와 플러그를 점검하여 손상 흔적이 없는지 확인하세요.

Figure 6.1: Demonstrates the visible cleaning effect of the ultrasonic cleaner on items like glasses, razor blades, and circuit boards, showing their improved cleanliness after use.

7. 문제 해결

If you encounter issues with your ultrasonic cleaner, refer to the following table:

8. 사양

Detailed technical specifications for the CREWORKS 2L Digital Ultrasonic Cleaner:

Figure 8.1: Dimensional diagram of the ultrasonic cleaner and its cleaning basket, providing precise measurements for planning and usage.

9. 보증 정보

This product comes with a standard manufacturer's warranty. For details regarding warranty coverage, duration, and claims, please refer to the warranty card included with your purchase or contact CREWORKS customer support directly. Keep your proof of purchase for warranty validation.

10. 고객 지원

For any questions, technical assistance, or service requests, please contact CREWORKS customer support. Contact information can typically be found on the product packaging, the official CREWORKS web사이트나 구매처를 통해 구매할 수 있습니다.

제조업체: 크레웍스

ASIN: B0CTSVGC2Z