WantJoin WZKSK1S30SSUSA

WantJoin 상업용 온수기 사용 설명서

Model: WZKSK1S30SSUSA

1. 중요 안전 지침

제품을 작동하기 전에 모든 지침을 주의 깊게 읽어 주십시오. 나중에 참조할 수 있도록 이 설명서를 보관하십시오.

  • 이 기기는 commercial use only. Do not use for household purposes.
  • Always use the provided commercial plug and ensure it is connected to a compatible commercial outlet (e.g., NEMA 5-20P or NEMA 5-20R). Using an incorrect adapter or household outlet may cause electrical hazards or damage to the unit.
  • 전원 공급 장치가 볼륨과 일치하는지 확인하십시오.tag기기의 정격 라벨에 지정되어 있습니다.
  • 제품, 코드, 플러그를 물이나 기타 액체에 담그지 마십시오.
  • 제품 작동 중에는 어린이와 허가받지 않은 사람이 제품에 접근하지 못하도록 하십시오.
  • 청소 또는 유지보수 전에는 항상 제품의 플러그를 뽑아주세요.
  • Do not operate the appliance if the power cord or plug is damaged, or if the appliance malfunctions or has been damaged in any manner. Contact qualified service personnel for repair.
  • Position the appliance on a stable, level, heat-resistant surface, away from walls and other heat sources.
  • Exercise extreme caution when handling hot water to prevent burns or scalds.
Commercial plug and water inlet connection
Image 1.1: Illustration of the commercial plug and water inlet connection. This appliance requires a commercial socket (NEMA 5-20P or NEMA 5-20R) and a flexible 304 stainless steel water pipe for connection.

2. 설정 및 설치

Proper installation is crucial for the safe and efficient operation of your hot water dispenser.

  1. 짐 풀기: Carefully remove the hot water dispenser from its packaging. Inspect for any damage during transit.
  2. 놓기: Place the dispenser on a stable, flat, and heat-resistant counter or surface. Ensure there is adequate clearance around the unit for ventilation.
  3. 물 연결: This unit is designed for direct plumbing connection. Connect the flexible 304 stainless steel water pipe to the water inlet on the back of the dispenser and to your commercial water supply. Ensure all connections are secure and leak-free.
  4. 전기 연결: Connect the commercial plug to a dedicated commercial socket (NEMA 5-20P or NEMA 5-20R). Do not use a standard household outlet or an unapproved adapter.
  5. 초기 헹굼: Before first use, fill the tank with water and dispense a few liters to flush out any manufacturing residues. Discard this water.
WantJoin Commercial Hot Water Dispenser front view
이미지 2.1: 앞면 view of the WantJoin Commercial Hot Water Dispenser, showing the tap and control panel.

3. 사용 설명서

This section details how to operate your hot water dispenser for optimal performance.

3.1. 제어판 오버view

Control panel of the hot water dispenser with temperature display and buttons
Image 3.1: Close-up of the control panel, featuring a digital temperature display, 'UP' and 'DOWN' buttons for temperature adjustment, and an 'ON/OFF' button. Indicators for 'HEATING', 'KEEP WARM', 'WATER LOW', and 'WATER FILLING' are also visible.
  • 디지털 디스플레이: 현재 수온을 보여줍니다.
  • UP (+) / DOWN (-) Buttons: 원하는 수온을 조절하는 데 사용됩니다.
  • 켜기/끄기 버튼: 장치의 전원을 켜거나 끕니다.
  • 지표:
    • 난방: 제품이 물을 가열하는 동안 표시등이 켜집니다.
    • 따뜻하게 지내세요: Illuminates when the unit is maintaining the set temperature.
    • WATER LOW: Indicates that the water level in the tank is low.
    • 물 채우기 : Indicates that the unit is automatically refilling the tank.

3.2. 초기 작업

  1. Ensure the unit is properly connected to both water and power supplies.
  2. 를 누르세요 켜짐/꺼짐 button to power on the dispenser.
  3. The unit will automatically begin to fill with water and then start heating. The "WATER FILLING" and "HEATING" indicators will illuminate.
  4. The dispenser can heat water to boiling temperature (212°F / 100°C) in approximately 13 minutes.
Hot water dispenser quickly heating water in 13 minutes
Image 3.2: Visual representation of the dispenser's rapid heating capability, reaching desired temperature in approximately 13 minutes.

3.3. 온도 조절

  1. Once the water has reached the default temperature, you can adjust it using the 위로 (+) 그리고 아래로 (-) 버튼.
  2. The digital display will show the set temperature. The unit will then heat or cool the water to maintain this temperature.
  3. Adjust the temperature according to the specific requirements of your hot beverages (e.g., coffee, tea, milk tea).

3.4. 뜨거운 물 공급

  • Place a cup or container under the dispensing tap.
  • Push the tap lever to dispense hot water. Release the lever to stop the flow.
  • The dispenser has a large capacity of 10 liters (2.5 gallons) and a stable output of 30 liters (8 gallons) per hour, capable of preparing up to 75 cups (13.5 oz each) per hour.
Hot water dispenser showing 8 gallons per hour output and 75 cups capacity
Image 3.3: The dispenser's high output, illustrating 8 gallons (30 liters) per hour, sufficient for approximately 75 cups of 13.5 oz beverages.

4. 유지관리 및 관리

Regular maintenance ensures the longevity and hygienic operation of your dispenser.

  • 청소:
    • 청소하기 전에는 항상 디스펜서의 전원을 뽑고 완전히 식히십시오.
    • 외부 표면을 광고로 닦으세요.amp cloth. Do not use abrasive cleaners or scouring pads, as these can damage the polished stainless steel finish.
    • The drip tray can be removed and washed with warm, soapy water. Rinse thoroughly and dry before reattaching.
    • For the interior, hand wash the inner tank if accessible, or use a descaling solution specifically designed for hot water appliances to remove mineral buildup. Follow the descaling product's instructions carefully.
  • 석회질 제거 : Depending on water hardness, descaling should be performed regularly (e.g., monthly or quarterly) to maintain heating efficiency and prevent damage.
  • 재료 품질: The dispenser features a rugged 304 stainless steel inner tank (0.4mm thick), foam insulation in the middle layer, and a brushed wear-resistant stainless steel outer layer, designed for durability and easy cleaning.
Diagram showing the layers of the hot water dispenser: inner SUS 304, middle foam insulation, outer brushed stainless steel
이미지 4.1: 단면도 view highlighting the high-quality materials: durable SUS 304 stainless steel inner tank, foam insulation, and brushed wear-resistant stainless steel outer casing.

5. 문제 해결

온수기 사용 중 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오.

문제가능한 원인해결책
디스펜서가 켜지지 않습니다.No power supply; loose plug; circuit breaker tripped.Check power connection and commercial socket. Ensure the plug is fully inserted. Reset circuit breaker if necessary.
물이 가열되지 않습니다.Heating element malfunction; low water level; unit not powered on.Ensure the unit is powered on. Check for "WATER LOW" indicator and ensure water supply is connected. If problem persists, contact service.
"WATER LOW" indicator is on.Insufficient water supply; water inlet blocked.Verify that the water supply is turned on and connected correctly. Check for kinks or blockages in the water pipe.
물의 흐름이 약합니다.Mineral buildup in tap or pipes; low water pressure.Perform descaling procedure. Check water supply pressure.
물맛이 이상해요.First use residue; mineral buildup; water quality issue.Perform initial rinse. Descale the unit. Consider checking your water supply quality.

For issues not listed here or if troubleshooting steps do not resolve the problem, please contact WantJoin customer support.

6. 사양

Technical specifications for the WantJoin Commercial Hot Water Dispenser.

상표가입하고 싶습니다
모델명WZKSK1S30SSUSA
ASINB0CTQL9Q3C
UPC/GTIN723747932747
용량10리터(2.5갤런)
산출30 Liters (8 Gallons) per hour
힘1800와트
재료Stainless Steel (SUS 304 inner tank)
색상은
제품 크기(L x W x H)11.02인치 x 16.14인치 x 28.54인치
품목 무게18.95파운드
특별 기능Rapid Boil, Single Hand Operation, Multi-function Temperature Control
추천 용도Commercial coffee preparation, commercial tea preparation, commercial hot beverage service
Dimensions of the hot water dispenser and separate water tank
이미지 6.1: 차원view of the hot water dispenser, showing key measurements for installation planning.

7. 보증 및 지원

Specific warranty details are not provided within this manual. For warranty information, technical support, or service inquiries, please contact WantJoin customer service through their official web제품을 구매한 사이트 또는 소매업체.

방문할 수 있습니다 WantJoin Store on Amazon 자세한 내용은.

© 2024 WantJoin. All rights reserved.