소개
The VOLTCRAFT PTM-200 is a highly versatile plug-in thermometer designed for precise temperature measurements across a wide range. It is ideal for use in liquids, gases, and for determining core temperatures in various professional and domestic settings, including quality control, laboratory work, and culinary applications.
This device offers a measurement range from -200 °C ~ +200 °C with a high resolution of 0.1 ° C (섭씨 XNUMX도). Key features include a clear display with white backlight, a robust Pt1000 센서, 그리고 IP65 방수 기능, ensuring durability and reliability. The integrated Max/Min function allows for tracking temperature extremes during a measurement period. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your PTM-200 thermometer.
패키지 내용
- VOLTCRAFT PTM-200 Thermometer Unit
- Pt1000 Measurement Sensor (3.5 mm diameter)
- 9V 배터리
- 사용 설명서
안전 지침
- 처음 사용하기 전에 이 설명서를 자세히 읽으십시오.
- 장시간 극한의 온도나 직사광선에 기기를 노출시키지 마세요.
- Ensure the battery compartment is securely closed to maintain IP65 water resistance.
- Handle the sensor probe with care to avoid injury or damage.
- 기기를 어린이의 손이 닿지 않는 곳에 보관하세요.
- 장치를 개조하거나 분해하지 마십시오.
설정
- 배터리 설치:
Locate the battery compartment on the back of the thermometer unit. Open the compartment cover. Insert the supplied 9V battery, ensuring correct polarity (+/-). Close the battery compartment cover securely to maintain the device's water resistance.
Image: The VOLTCRAFT PTM-200 thermometer unit, showing the main display, control buttons, the connected Pt1000 sensor probe, and a 9V battery. This illustrates the components included and ready for setup.
- 센서 연결:
Connect the Pt1000 measurement sensor cable to the designated port on the top of the thermometer unit. Ensure the connection is firm and secure.
- 초기 전원 켜기:
Press the red power button to turn on the device. The display should illuminate, and a temperature reading will appear.
작동 지침
- 전원 켜기/끄기:
빨간색 전원 버튼을 누르세요(
) to turn the thermometer on. Press and hold the same button for a few seconds to turn it off. - 측정하기:
Insert the Pt1000 sensor probe into the substance or area where you wish to measure the temperature. Allow a few moments for the reading to stabilize on the display. The white backlight ensures clear visibility in various lighting conditions.
Image: The VOLTCRAFT PTM-200 thermometer with its display showing a temperature reading of 23.4 °C. The Pt1000 sensor is attached and ready for use, demonstrating the device in operation.
- Max/Min Function:
Press the "MAX/MIN" button to cycle through the maximum recorded temperature, minimum recorded temperature, and current temperature. This function is useful for monitoring temperature fluctuations over time.
- 백라이트 제어:
전구 모양 버튼을 누르세요.
) to activate or deactivate the white backlight for the display. - 방수 기능(IP65):
The device is rated IP65, meaning it is protected against dust ingress and low-pressure water jets from any direction. This makes it suitable for use in environments where it may be exposed to splashes. However, it is not designed for immersion in water.
유지
- 청소:
Wipe the thermometer unit and sensor probe with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the device. Ensure the sensor is clean before and after each use for accurate readings.
- 배터리 교체:
When the battery warning indicator appears on the display, replace the 9V battery as described in the "Setup" section. Always dispose of used batteries responsibly.
- 저장:
Store the thermometer in a dry, cool place, away from direct sunlight and extreme temperatures. Disconnect the sensor probe if storing for extended periods.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 장치가 켜지지 않습니다. | 배터리가 방전되었거나 잘못 설치되었습니다. | Check battery polarity or replace the 9V battery. |
| 온도 판독값이 부정확합니다. | Sensor probe is dirty or damaged; improper contact with substance. | Clean the sensor probe. Ensure the probe is fully immersed or making good contact. Check for visible damage to the sensor or cable. |
| 디스플레이가 어둡거나 깜빡입니다. | 배터리가 부족합니다. | 9V 배터리를 교체하십시오. |
| "Err" 메시지가 표시됩니다. | Sensor error or out of measurement range. | Ensure the sensor is properly connected. Check if the temperature is within the -200 °C to +200 °C range. If the problem persists, the sensor may be faulty. |
여기에 나열되지 않은 문제가 발생하거나 해결 방법으로 문제가 해결되지 않으면 고객 지원팀에 문의하십시오.
명세서
| 모델: | PTM-200 (VC-12920030) |
| 측정 범위: | -200 °C ~ +200 °C |
| 해결: | 0.1 ° C (섭씨 XNUMX도) |
| 센서 유형: | 1000피티 |
| 표시하다: | 백색 백라이트 LCD |
| 보호 등급: | IP65 (방진 및 저압수 분사 방지) |
| 전원 공급 장치: | 9V 배터리 |
| 치수(길이 x 너비 x 높이): | 7.3 x 3 x 12.1cm |
| 무게: | 208.5g |
| 제조업체: | 볼트크래프트 |
| 첫 번째 이용 가능: | 25년 2024월 XNUMX일 |
보증
The VOLTCRAFT PTM-200 thermometer comes with a warranty period of a minimum of 2년 from the date of purchase. This warranty covers manufacturing defects and ensures that your product functions as intended under normal use. Please retain your proof of purchase for any warranty claims.
지원하다
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your retailer or the VOLTCRAFT customer support. Refer to the contact information provided with your purchase or visit the official VOLTCRAFT web지원 세부 정보 사이트.