JMDHKK K19+ 숨겨진 카메라 탐지기 사용 설명서

소개

The JMDHKK K19+ is an advanced multi-functional device designed for comprehensive privacy protection. It efficiently detects hidden cameras, wireless listening devices, GPS trackers, and other suspicious surveillance tools. Utilizing German microprocessor technology, it offers precise detection with a user-friendly interface, making it suitable for various environments including travel, hotels, offices, and personal spaces.

• Advanced Hidden Camera Detection: Scans for hidden cameras and unauthorized surveillance devices.
• 자기장 감지: Detects magnetic fields used by covert devices like GPS trackers.
• Superior Accuracy: Equipped with advanced German microprocessor technology for precise detection.
• 사용자 친화적: Features adjustable sensitivity, simple switches, and clear signal strength indicators with audible and vibration alerts.
• 휴대성 있는 디자인: Compact and lightweight for on-the-go privacy protection.

패키지 내용

• 본체
• 안테나
• GS Probe
• 충전 케이블
• 사용자 설명서

Image: The JMDHKK K19+ detector shown with its included accessories: the main unit, RF antenna, magnetic field (GS) probe, and USB charging cable.

설정

1. Attach RF Antenna: Carefully screw the RF antenna into the designated port on the main unit. Ensure it is securely tightened.
2. Attach GS Probe: For magnetic field detection, connect the GS probe to its interface on the main unit and tighten the screw. The flexible probe can be bent to reach difficult areas.
3. 전원 켜기: Turn the power knob clockwise until a click sound is heard to power on the device.
4. 감도 조정: Initially, turn the sensitivity knob clockwise to the maximum. Then, slowly turn it counter-clockwise until the alarm stops and only 1-3 green signal bars are flashing. This sets the device to a stable detection state.

Image: The JMDHKK K19+ detector with its RF antenna attached, ready for use.

작동 모드

1. RF Signal Detection

This mode detects wireless signals emitted by devices such as hidden listening bugs, wireless cameras, and GPS trackers. The device defaults to this mode upon power-on.

• 활성화: Ensure the RF antenna is attached. The device automatically enters RF Signal Detection mode when switched on.
• 감도 조정 : Adjust the sensitivity knob to find a balance where the device is not constantly alarming but is sensitive enough to detect signals.
• 해석: Signal bars on the LED display will light up, and the device will beep or vibrate when a wireless signal is detected. The closer you are to the source, the more bars will light up and the alarm will intensify.
• 팁: To eliminate interference, switch off known electronic devices (cell phones, smartwatches, Wi-Fi routers, etc.) in your area before scanning.

Image: The K19+ detector actively scanning for RF signals in a conference room, indicating its use for detecting wireless surveillance devices.

2. 자기장 감지

This mode is used to identify magnetic objects such as GPS trackers, magnetic spy devices, and concealed tools with magnetic components.

• 활성화: Attach the GS probe. Press and hold the "GS" button for 3-4 seconds to activate magnetic field detection. The magnetic detection icon and a white LED on the probe tip will light up.
• 스캐닝: Slowly move the GS probe around areas where magnetic devices might be hidden (e.g., under car seats, in luggage).
• 해석: When a strong magnetic object is detected, the device will sound an alarm. The closer the probe is to the object, the more signal bars will appear.
• 팁: If the GPS tracker cannot be found, reduce the detection sensitivity to narrow the search range and continue scanning.

Image: The K19+ detector with its flexible magnetic field probe being used to search for a hidden GPS tracker under a car seat.

3. IR Auto Scan Mode

This mode automatically detects infrared night vision devices at night or in low-light environments.

• 활성화: Press and hold the "IR" button for 3-4 seconds. A red icon will start flashing on the screen, indicating IR auto scanning is active.
• 환경: For best results, use this mode in a dark room with curtains closed to eliminate natural light interference.
• 발각: The highly sensitive infrared receiver on the back of the device catches IR lights emitted by night vision cameras. When it detects any type of infrared light within a 0.5 to 10-foot range, it will automatically sound an alarm.

4. Camera Lens Detection (Camera Finder)

This mode detects hidden cameras by utilizing light reflection technology and special filter lenses to reveal concealed camera lenses.

• 활성화: Short press the "LASER" button to turn on the 8 red LED lights on the back of the device.
• 스캐닝: 살펴보세요 viewfinder with one eye and slowly move the detector around the area you wish to scan.
• 해석: If there's a hidden camera, its lens will reflect the red LED lights, appearing as a bright, flashing red dot through the view파인더.
• Flashing Frequency: Press and hold the "LASER" button again to cycle through different flashing speeds for the red LEDs, which can help in identifying different types of lenses.

Image: The K19+ detector's camera lens detection feature highlighting potential hidden cameras in a hotel room and a bathroom using its red LED lights.

5. Torch / Flashlight

The device includes an auxiliary flashlight function for lighting or emergency purposes.

• 활성화: Press and hold the "TORCH" button for 3-4 seconds to turn on the two LED lights on the back of the device.
• 비활성화: Short press the "TORCH" button again to turn off the lights.
• Probe Light: The search light on the GS probe head is also bright enough to be used as a night light or flashlight.

충전 중

To charge the JMDHKK K19+ detector, use the provided USB charging cable.

1. Connect the small end of the USB charging cable to the charging port on the side of the detector.
2. Plug the other end of the USB cable into a power source (e.g., a USB wall adapter, computer USB port).
3. While charging, a battery icon will appear on the screen.
4. A full charge typically takes about 4 to 5 hours. It is recommended to charge your detector regularly to maintain its battery life and ensure optimal performance.

명세서

문제 해결

• 장치가 켜지지 않음: Ensure the battery is charged. Connect the device to the charging cable and allow it to charge for at least 30 minutes before attempting to power on again.
• Constant false alarms in RF mode: Lower the sensitivity using the adjustment knob. Move away from known wireless devices like Wi-Fi routers, cell phones, or smart devices.
• Difficulty detecting hidden cameras in IR mode: Ensure the scanning area is sufficiently dark. Close curtains or turn off lights to minimize natural light interference.
• No detection in Magnetic Field mode: Ensure the GS probe is securely attached. Increase the sensitivity gradually. The magnetic field detection is short-range, so bring the probe very close to suspected areas.
• Red LED lights not flashing in Camera Lens Detection: Ensure the device is powered on and the "LASER" button has been pressed. Check battery level.

유지

• 청소: 부드럽고 마른 천을 사용하여 기기를 닦으세요. 액체 세척제나 연마재를 사용하지 마세요.
• 저장: 본 기기는 직사광선과 극한의 온도를 피해 시원하고 건조한 곳에 보관하세요.
• 배터리 관리 : 배터리 수명을 연장하려면 기기를 자주 완전히 방전시키지 마십시오. 계속 사용하지 않더라도 정기적으로 충전하십시오.
• 조심스럽게 다루십시오: 이 기기에는 민감한 전자 부품이 포함되어 있습니다. 떨어뜨리거나 강한 충격을 가하지 마십시오.

보증 및 지원

The JMDHKK K19+ Hidden Camera Detector comes with standard manufacturer support. For specific warranty details, please refer to the documentation included in your product packaging or visit the official JMDHKK web대지.

확장된 보장을 위해 선택형 보호 플랜을 이용할 수 있습니다.

• 2년 보호 계획
• 3년 보호 계획
• Complete Protect(월별 청구)

For technical assistance or customer service, please contact JMDHKK support through their official channels.