1. 서론
This manual provides detailed instructions for the assembly, operation, and maintenance of your ErGear EGESD63B electric standing desk. Please read this manual thoroughly before assembly and use to ensure proper function and safety. Keep this manual for future reference.
Image 1.1: The ErGear EGESD63B electric standing desk in a typical office setup.
2. 안전 정보
안전한 작동을 보장하고 부상이나 손상을 방지하려면 다음 안전 지침을 준수하세요.
- Do not exceed the weight limit of 250 pounds (113 kg) on the desktop.
- Ensure the desk is properly anchored to the floor to prevent tipping, especially when at maximum height.
- Avoid use near water or in humid conditions to prevent electrical hazards.
- 작동 중에는 어린이와 애완동물이 책상에 접근하지 못하도록 하세요.
- 높이를 조정할 때 책상 이동 경로에 방해물이 없는지 확인하세요.
- 제공된 전원 어댑터와 구성품만 사용하십시오.
3. 패키지 내용
Verify that all components are present and undamaged before beginning assembly. If any parts are missing or damaged, contact ErGear customer service.
- Desktop (One-piece)
- 책상 다리 (2)
- Crossbar/Frame
- 제어판
- 전원 어댑터 및 케이블
- 케이블 관리 트레이
- Hardware Kit (screws, bolts, washers)
- 조립 도구
- 상세 사용 설명서
4. 설치 및 조립
Assembly requires one person and includes all necessary tools. Follow these general steps for setup:
- 구성 요소 풀기: 모든 부품을 포장에서 조심스럽게 꺼낸 후 긁힘을 방지하기 위해 깨끗하고 부드러운 표면에 놓으세요.
- 책상 프레임 조립: Attach the desk legs to the crossbar according to the diagrams in the detailed manual. Ensure all screws are tightened securely.
- 데스크톱 첨부: Place the one-piece desktop upside down on the soft surface. Carefully align the assembled frame with the pre-drilled holes on the desktop and secure it using the provided screws. The one-piece desktop design simplifies this step, allowing for faster installation.
- 제어판 및 케이블 정리 설치: Mount the control panel to the underside of the desktop in the designated area. Attach the cable management tray.
- 배선 연결: Connect the motor cables from the legs to the control box, and then connect the control panel to the control box. Finally, connect the power adapter to the control box and plug it into a power outlet.
- Initial Power-On and Calibration: Refer to the detailed manual for initial power-on and calibration steps, which typically involve pressing and holding a button to reset the desk to its lowest position.
Image 4.1: Hassle-free assembly with the one-piece desktop.
Image 4.2: The ErGear EGESD63B features a seamless one-piece desktop for easier setup.
5. 사용 설명서
Your ErGear EGESD63B electric standing desk is designed for easy height adjustment to switch between sitting and standing positions.
5.1. 높이 조절
- 위/아래 버튼: Use the ▲ (Up) and ▼ (Down) buttons on the control panel to smoothly raise or lower the desk to your desired height. The desk adjusts from 27.9 inches to 46.9 inches.
5.2. 메모리 사전 설정
The control panel features three memory preset buttons (1, 2, 3) to store and recall your preferred sitting and standing heights.
- 사전 설정을 지정하려면: Adjust the desk to your desired height using the Up/Down buttons. Press the 'M' button, then immediately press one of the number buttons (1, 2, or 3) to save the current height to that preset. The display will show 'S-' followed by the number to confirm.
- 프리셋 불러오기: 해당 숫자 버튼(1, 2 또는 3)을 누르기만 하면 됩니다. 책상이 저장된 높이로 자동으로 올라갑니다.
Image 5.1: Adjust the desk for sit and stand comfort.
6. 유지관리
Regular maintenance helps ensure the longevity and smooth operation of your standing desk.
- 청소: 데스크탑과 프레임은 부드러운 천으로 닦아주세요.amp 천으로 닦으세요. 강한 화학 물질이나 연마성 세제는 피하세요.
- 연결 확인: Periodically check all screws and electrical connections to ensure they are secure. Tighten any loose screws.
- 케이블 관리 : Ensure cables are neatly organized within the cable management tray to prevent snagging during height adjustments.
7. 문제 해결
If you encounter issues with your ErGear EGESD63B desk, refer to the following common troubleshooting steps:
- 책상이 움직이지 않음:
- 전원 케이블이 책상 콘센트와 벽면 콘센트에 제대로 꽂혀 있는지 확인하십시오.
- 이동을 방해하는 장애물이 없는지 확인하십시오.
- Perform a reset: Unplug the power for 10 seconds, then plug it back in. Press and hold the 'Down' button until the desk reaches its lowest point and slightly rebounds.
- 디스플레이의 오류 코드:
- If an error code appears, refer to the detailed manual for specific code meanings and solutions. Often, a reset (as described above) can resolve minor errors.
- 고르지 않은 움직임:
- 책상이 평평한 곳에 있는지 확인하세요.
- Check that all frame connections are tight.
If problems persist after attempting these steps, contact ErGear customer support for assistance.
8. 사양
| 특징 | 사양 |
|---|---|
| 상표 | 에르기어 |
| 모델 | EGESD63B |
| 데스크탑 크기 (길이 x 너비) | 40 x 24인치(101.6 x 61cm) |
| 높이 조절 범위 | 27.9~46.9인치(70.9~119.1cm) |
| 중량 용량 | 250파운드(113kg) |
| 모터 유형 | 모터 |
| 높이 위치의 수 | 3 (메모리 사전 설정) |
| 데스크탑 소재 | 엔지니어링 목재 |
| 프레임 소재 | 스테인리스 스틸 |
| 색상 | 검은색 |
| 조립이 필요합니다 | Yes, with included tools |
Image 8.1: Product dimensions of the ErGear EGESD63B desk.
9. 보증 및 지원
ErGear provides a comprehensive warranty for your EGESD63B electric standing desk:
- 2년 제한 보증: Covers the motor, controller, and cables.
- 5년 제한 보증: Covers the desktop, frame, and other parts.
For warranty claims, technical support, or any questions regarding your product, please contact ErGear customer service through their official website or the retailer where the product was purchased. Please have your model number (EGESD63B) and proof of purchase ready.