Conentool 21V Cordless Brushless Impact Wrench User Manual (Model CW-313)

1. 서론

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Conentool 21V Cordless Brushless Impact Wrench, Model CW-313. Please read these instructions carefully before using the tool to ensure proper function and to prevent injury.

2. 안전 지침

화재, 감전, 신체 상해의 위험을 줄이려면 전동 공구를 사용할 때 항상 기본적인 안전 예방 조치를 따르세요.

작업 영역 안전: 작업 공간을 깨끗하고 밝게 유지하세요. 어수선하거나 어두운 곳은 사고의 위험이 있습니다. 가연성 액체, 가스 또는 먼지가 있는 곳 등 폭발 위험이 있는 환경에서는 전동 공구를 작동하지 마세요.
전기 안전: 접지된 표면에 신체 접촉을 피하십시오. 전동 공구를 비나 습기에 노출시키지 마십시오.
개인 안전: 항상 눈 보호 장비를 착용하십시오. 장시간 작동 시에는 청력 보호 장비를 착용하십시오. 헐렁한 옷이나 장신구는 피하고, 긴 머리는 고정하십시오.
도구 사용 및 관리: 전동 공구에 무리한 힘을 가하지 마십시오. 사용 용도에 맞는 전동 공구를 사용하십시오. 조정, 액세서리 교체 또는 전동 공구 보관 시에는 반드시 배터리 팩을 전동 공구에서 분리하십시오.
배터리 팩 사용 및 관리: 제조사에서 지정한 충전기로만 충전하십시오. 다른 전동 공구에는 배터리 팩을 사용하지 마십시오.

3. 제품 오버view

The Conentool CW-313 is a powerful 21V cordless brushless impact wrench designed for efficient tightening and loosening of fasteners. It features a robust brushless motor and a high-capacity battery for extended use.

3.1 주요 구성 요소

Diagram of Conentool Impact Wrench components — **영상:** 위에view of the Conentool Impact Wrench with labeled parts including 1/2" chuck, LED light, variable speed switch, battery pack release button, brushless motor, forward and reverse switch, soft rubberized handle, and smart control panel. This image illustrates the main external and internal features of the tool.

3.2 브러시리스 모터 기술

This impact wrench is equipped with an upgraded pure copper brushless motor, offering enhanced performance and durability compared to brushed motors.

Diagram of brushless motor benefits — **영상:** Diagram illustrating the benefits of the upgraded pure copper brushless motor, showing increased life time (+60%), increased power (+80%), reduced sparks (-90%), and reduced noise (-60%).

3.3 4.0Ah Large Capacity Battery

The tool is designed to be powered by a 4.0Ah large capacity lithium-ion battery, providing extended working hours and consistent power output.

Graph comparing 4.0Ah battery capacity — **영상:** Graph showing the extended electricity retention and working hours of a 4.0Ah battery compared to miscellaneous batteries, highlighting its large capacity.

4. 설정

4.1 배터리 설치 및 제거

설치하려면: Align the battery pack with the base of the tool handle. Slide the battery pack into the handle until it clicks securely into place. Ensure it is fully seated.
제거하려면: Press the battery pack release button (refer to Product Overview image PT05) located at the front of the battery. While holding the button, slide the battery pack out of the tool handle.

Note: The battery may be sold separately or included in specific kits. Ensure the battery is fully charged before first use.

4.2 소켓/비트 설치

The impact wrench features a 1/2-inch chuck for attaching sockets or hex screwdriver bits.

설치하려면: Push the desired 1/2-inch impact socket or hex screwdriver bit onto the square drive anvil until it locks into place. Pull on the accessory to ensure it is securely attached.
제거하려면: Pull the accessory firmly off the square drive anvil.

Image showing 2-in-1 functionality as impact wrench and screwdriver — **영상:** Illustration of the tool's 2-in-1 functionality, demonstrating its use as an impact wrench with a socket and as a screwdriver with a hex bit adapter.

5. 사용 설명서

5.1 전원 켜기/끄기 및 속도 조절

The tool is activated by pressing the variable speed switch. The speed of the tool is controlled by the amount of pressure applied to the switch. Pressing lightly results in lower speed, while pressing fully results in maximum speed (up to 3300 RPM).

5.2 정방향 및 역방향 작동

The direction of rotation is controlled by the forward and reverse switch, located above the trigger.

Diagram of forward and reverse switch operation — **영상:** Diagram showing the positions of the forward and reverse switch: right for forward (tighten), centered for locked, and left for reverse (loosen).

Forward (Tighten): Push the switch to the right.
Reverse (Loosen): Push the switch to the left.
잠김: Position the switch in the center to prevent accidental starting. Always engage the lock when not in use or when changing accessories.

5.3 LED 조명 사용하기

The built-in LED light automatically illuminates the work area when the trigger is pressed, enhancing visibility in dark or confined spaces.

Image showing the built-in LED light in action — **영상:** The impact wrench in use, with its built-in LED light illuminating a dark work area, enhancing visibility.

5.4 Torque Application

The Conentool CW-313 delivers a maximum torque of 680 N.m (approximately 501.54 ft-lbs), suitable for various applications from tightening screws to tire disassembly and industrial use.

Graph showing torque levels for different applications — **영상:** Graph illustrating the maximum torque of 680 N.m and its application range, from tightening screws (low torque) to tire disassembly and engineering industrial use (high torque).

6. 유지관리

정기적인 유지관리는 충격 렌치의 수명과 최적의 성능을 보장합니다.

청소: 과열을 방지하기 위해 도구의 통풍구를 깨끗하고 이물질이 없도록 유지하십시오. 부드러운 천을 사용하십시오.amp 외부를 청소할 때는 천을 사용하세요. 강한 화학 물질이나 연마성 세제는 사용하지 마세요.
배터리 관리 : Store batteries in a cool, dry place away from direct sunlight. Do not store batteries in a discharged state for extended periods. Recharge batteries regularly, even if not in use, to maintain their health.
점검: Periodically inspect the chuck for wear or damage. Ensure all screws are tight. If any parts are damaged, have them replaced by a qualified service technician.

7. 문제 해결

임팩트 렌치 사용 중 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오.

문제	가능한 원인	해결책
도구가 시작되지 않음	배터리가 충전되지 않았거나 잘못 설치되었습니다. 전진/후진 스위치가 잠금 위치에 있습니다.	Charge battery fully and ensure it is securely installed. Move the Forward/Reverse switch out of the center (locked) position.
전력 또는 속도 감소	Low battery charge; Overheating; Worn carbon brushes (not applicable for brushless motor, but common for brushed tools).	Recharge the battery. Allow the tool to cool down if it has been used continuously.
과도한 진동이나 소음	부속품이 헐거워졌거나 내부 부품이 손상되었습니다.	Ensure the socket/bit is properly seated. If the problem persists, discontinue use and contact customer support.

8. 사양

특징	사양
모델 번호	CW-313
제조업체	콘툴
전원	배터리 구동
권tage	21 볼트
무부하 속도	최대 3300RPM
최대 토크	680 N.m (approx. 501.54 ft-lbs)
척 사이즈	1/2 인치
모터 유형	무브러시
Battery Capacity (recommended)	4.0 Ah Lithium-ion (sold separately or included in specific kits)
패키지 크기	37.5 x 28.4 x 11.4cm
무게	3.53kg (포장 포함)

8.1 포함 된 액세서리

The following accessories are typically included with the Conentool CW-313 impact wrench kit:

Image of product accessories — **영상:** A visual representation of the product accessories, which typically include the electric wrench, various socket wrenches, screwdriver bits, pins, a conversion head, charger, battery, and a carry case.

1 x Electric Wrench (Impact Wrench)
6 x Socket Wrenches (Impact Sockets)
1 x Screwdriver (Hex Bit Adapter)
2 x Circular Circle (Retaining Rings for sockets)
2 x Pin (for socket retention)
1 x Conversion head (for screwdriver bits)
1 x 충전기
1 x Battery (4.0Ah, if included in kit)
1 x 운반 케이스

9. 보증 및 지원

For warranty information, technical support, or to order replacement parts, please refer to the contact information provided at the point of purchase or visit the official Conentool website. Please have your model number (CW-313) and purchase date available when contacting support.

Conentool CW-313