Transformers Studio Series Deluxe Class Reactivate 10 Gamer Edition Bumblebee Instruction Manual

1. 서론

This manual provides detailed instructions for the Transformers Studio Series Deluxe Class Reactivate 10 Gamer Edition Bumblebee action figure. This 4.5-inch figure converts between robot and dune buggy modes and includes blaster accessories. Please read these instructions carefully before use to ensure proper operation and enjoyment of your figure.

2. 안전 정보

경고: 질식 위험 - 작은 부품이 발생할 수 있습니다. 3세 미만 어린이에게는 사용하지 마십시오.

Always supervise young children during play. Keep small accessories away from infants and toddlers.

3. 패키지 내용

• 1x Bumblebee Converting Action Figure
• 2x Blaster Accessories

4. 제품 오버view

The Bumblebee figure is a highly articulated collectible inspired by the Transformers: Reactivate video game. It features metallic battle damage deco and can transform between two distinct modes: robot and dune buggy.

4.1 Robot Mode

Image: Bumblebee figure in its robot form, showcasing articulation and design details.

In robot mode, Bumblebee stands approximately 4.5 inches (11.5 cm) tall. It features articulated head, arms, and legs, allowing for various action poses. The figure is designed with intricate details and metallic battle damage deco.

4.2 Dune Buggy Mode

Image: Bumblebee figure transformed into its compact dune buggy vehicle mode.

The dune buggy mode is a compact and robust vehicle, ready for off-road action. The transformation process ensures a secure and stable vehicle form, maintaining the figure's aesthetic integrity.

5. 설정

Remove the Bumblebee figure and its accessories from the packaging. Inspect the figure for any visible damage or loose parts. No assembly is required beyond the transformation process.

6. 작동 지침: 변환

The Bumblebee figure converts between robot and dune buggy modes in 20 steps. Follow these general guidelines for transformation. Note: Specific joint movements may vary slightly. Apply gentle, firm pressure during transformation.

6.1 Robot to Dune Buggy Mode (20 Steps)

1. Detach any accessories from the figure.
2. Fold the robot's hands into its forearms.
3. 허리 부분을 180도 회전시킵니다.
4. Collapse the chest panel downwards.
5. Fold the head into the chest cavity.
6. Rotate the shoulder sections inward.
7. Bring the arms together, aligning them with the body.
8. Align the leg panels to prepare for vehicle formation.
9. Fold the feet upwards and inward.
10. Connect the leg sections to form the rear of the dune buggy.
11. Secure the arm sections to form the sides of the vehicle.
12. Rotate the wheels into their proper vehicle position.
13. Close any remaining gaps between panels.
14. Ensure all panels are flush and securely connected.
15. Verify the stability of the vehicle mode.
16. Check for proper alignment of all vehicle parts.
17. Ensure all locking tabs are engaged to hold the form.
18. Smooth out any visible seams or misaligned parts.
19. Confirm that the wheels spin freely.

6.2 Dune Buggy to Robot Mode (20 Steps)

1. Detach any accessories from the vehicle.
2. Separate the rear vehicle sections to begin forming the legs.
3. Extend the feet downwards.
4. Unfold the leg panels.
5. Separate the side vehicle sections to free the arms.
6. Extend the arms from the body.
7. Rotate the shoulder sections into their robot position.
8. Lift the head from the chest cavity.
9. Extend the chest panel.
10. Rotate the waist 180 degrees back to the front-facing position.
11. Extend the hands from the forearms.
12. Adjust the arm and leg articulation for posing.
13. Position the figure for display.
14. Verify the stability of the robot mode.
15. Check for proper alignment of all robot parts.
16. Ensure all locking tabs are disengaged.
17. Smooth out any visible seams or misaligned parts.
18. Confirm that articulation points move freely.
19. Attach blaster accessories to the robot's hands (optional).
20. The figure is now in Robot mode.

7. 액세서리 부착

The Bumblebee figure comes with two blaster accessories. These can be attached to the figure's hands in robot mode or stored in designated ports in vehicle mode, if available. Gently push the blaster's peg into the corresponding hole on the figure's hand or storage port until secure.

8. 유지관리

To keep your Transformers figure in optimal condition:

• 청소: 부드럽고 마른 천으로 피규어를 닦으세요. 잘 지워지지 않는 얼룩은 약간 거친 천으로 닦아주세요.amp 천을 사용할 수 있지만 과도한 습기는 피하십시오. 독한 화학 약품이나 연마성 세척제를 사용하지 마십시오.
• 저장: 변색이나 재질 손상을 방지하기 위해 피규어를 직사광선과 극한 온도 변화를 피해 보관하십시오.
• 손질: 피규어를 다룰 때는 특히 변형 과정에서 관절에 무리가 가거나 작은 부품이 파손되지 않도록 주의하십시오.

9. 문제 해결

• 변형의 어려움: If parts are stiff, ensure you are following the steps in the correct order. Do not force parts; re-examine the instructions. Sometimes, a slight wiggle or gentle pressure in a different direction can help.
• 느슨한 관절: 시간이 지남에 따라 일부 관절이 약간 헐거워질 수 있습니다. 이는 반복 사용 시 발생하는 정상적인 현상입니다.
• 부품이 정렬되지 않음: Double-check that all previous steps are completed correctly and that no panels are obstructing the transformation path.

10. 사양

11. 보증 및 지원

보증 정보 또는 제품 지원에 대해서는 제조업체의 공식 웹사이트를 참조하십시오. web해당 사이트를 방문하거나 고객 서비스 부서에 문의하세요. 구매 증빙 자료로 구매 영수증을 보관하세요.