1. 서론
This manual provides detailed instructions for the safe and effective use of your KUIDAMOS Pneumatic Vacuum Regulator. This device is designed to precisely control vacuum pressure in various industrial and scientific applications. Please read this manual thoroughly before installation and operation to ensure optimal performance and longevity of the product.
Image 1.1: The KUIDAMOS Pneumatic Vacuum Regulator with its integrated pressure dial.
2. 제품 특징
- Self-Locking Pressure Regulating Design: Allows for easy and secure pressure setting in three simple steps.
- Wide Operating Pressure Range: Capable of regulating pressure from -100 to -1.3 Kpa.
- Clear Dial Design: Features an easy-to-read dial for accurate pressure monitoring and adjustment.
- 다양한 응용 프로그램: Suitable for use in compressed air equipment and pipelines, including air compressors, air receivers, dryers, and air compression pipelines.
- 컴팩트한 사이즈: Designed for portability and ease of use in various setups.
3. 패키지 내용
패키지를 열 때 모든 품목이 들어 있고 손상되지 않았는지 확인하세요.
- 1 x Air Pressure Regulator
- 1 x Pressure Dial
- 1 x 스탠드
Image 3.1: Included components: regulator, pressure dial, and mounting bracket.
4. 설정 지침
Follow these steps to properly set up your pneumatic vacuum regulator:
- 조절기 장착: Secure the regulator using the provided stand. Ensure it is mounted in a stable position, preferably vertically, to allow for clear reading of the pressure dial.
- Attaching the Pressure Dial: Carefully screw the pressure dial into the designated port on the regulator. Hand-tighten only to avoid damage.
- Connecting to the Pneumatic System: Connect the regulator to your compressed air equipment or pipeline using appropriate fittings for the RC 1/8 inch interface thread. Ensure all connections are sealed properly to prevent leaks.
Image 4.1: Key components for assembly, including the pressure setting handwheel and core assembly.
Image 4.2: Internal structure diagram for understanding component placement.
5. 사용 설명서
The KUIDAMOS Pneumatic Vacuum Regulator features a self-locking design for precise and stable pressure adjustment:
- 터놓다: Gently lift the adjustment knob (handwheel) upwards to unlock the pressure setting mechanism.
- 조정하다: Rotate the knob clockwise to increase vacuum pressure or counter-clockwise to decrease it. Observe the pressure dial for real-time readings.
- 잠그다: Once the desired pressure is reached, press the knob downwards to lock the setting. This prevents accidental changes to the pressure.
The operating pressure range for this regulator is -100 to -1.3 Kpa. Ensure your application's requirements fall within this range.
Image 5.1: Visual guide for the three-step pressure adjustment process.
Image 5.2: The regulator's pressure dial for monitoring current vacuum levels.
6. 유지관리
Regular maintenance ensures the longevity and reliable performance of your regulator:
- 점검: Periodically inspect the regulator and all connections for any signs of wear, damage, or leaks. Address any issues promptly.
- 청소: Keep the exterior of the regulator clean. Use a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that could damage the surface or markings.
- 연결 확인: Ensure all pneumatic connections remain tight and secure. Loose connections can lead to pressure loss or inaccurate readings.
7. 문제 해결
If you encounter issues with your pneumatic vacuum regulator, refer to the following common problems and solutions:
- Difficulty Connecting Hoses: Ensure the hose diameter and thread type match the regulator's RC 1/8 inch interface. Incorrect sizing is a common cause of connection issues. Consult a professional if unsure about compatible fittings.
- No Pressure or Unstable Pressure:
- Check for leaks in the system, especially at connection points.
- Verify that the air supply is adequate and consistent.
- Ensure the adjustment knob is properly unlocked before attempting to change pressure, and locked afterward.
- 부정확한 압력 측정:
- Confirm the pressure dial is securely attached and not damaged.
- Compare the reading with another calibrated gauge if possible to verify accuracy.
8. 사양
| 사양 | 값 |
|---|---|
| 작동 압력 범위 | -100 to -1.3 Kpa |
| Interface Thread | RC 1/8 inch |
| 패키지 크기 | 6.93 x 4.72 x 1.97 인치 |
| 품목 무게 | 8.5 온스 |
| 모델 번호 | Pneumatic Vacuum Regulator |
| 제조업체 | KUIDAMOS |
Image 8.1: The regulator is suitable for a wide range of pneumatic applications.
Image 8.2: Application fields for the pneumatic vacuum regulator.
9. 보증 및 지원
For warranty information, technical support, or any inquiries regarding your KUIDAMOS Pneumatic Vacuum Regulator, please contact KUIDAMOS customer service directly. Refer to the product packaging or the official KUIDAMOS web연락처 정보 사이트.