소개
This manual provides comprehensive instructions for the safe and proper installation, operation, and maintenance of your USX STAR Full Motion TV Wall Mount, Model Movable 32-70 inch. Please read all instructions carefully before beginning installation.
This TV mount is designed to securely hold most 32-70 inch TVs weighing up to 99 lbs, with VESA mounting patterns ranging from 50x50mm to 400x400mm. It offers smooth swivel, tilt, and extension capabilities for optimal view각도를 나타냅니다.
안전 정보
- 중량 용량: 최대 중량 용량은 99파운드(45kg)를 초과하지 마십시오.
- TV 크기 : Ensure your TV size is between 32-70 inches.
- VESA 호환성: Verify your TV's VESA pattern is within 50x50mm to 400x400mm.
- 벽 유형: This TV wall mount is suitable for installation on 8/12/16 inch wood studs, concrete walls, and brick walls. 석고보드에만 설치하지 마십시오.
- 전문적인 설치: 설치 과정에 대해 확신이 없다면 자격을 갖춘 전문가에게 문의하세요.
- 하드웨어: Use only the provided hardware. If concrete anchors (10x50mm) are needed and not included, contact customer service.
패키지 내용
Please check that all components are present and undamaged before installation. Refer to the included parts list for detailed identification.
이미지: 이상view of all included parts for the TV wall mount.
명세서
| 상표 | USX 스타 |
| 모델 | Movable 32-70 inch |
| 호환 가능한 TV 크기 | 32-70 인치 |
| 최대 하중 용량 | 99파운드(45kg) |
| VESA 호환성 | 50x50mm - 400x400mm |
| 이동 유형 | Full Motion (Swivel, Tilt, Extension, Leveling) |
| 기울기 각도 | +5° / -12° |
| 회전 각도 | ±45° |
| 벽에서 연장된 부분 | 2.58인치(수축 시) ~ 13.89인치(확장 시) |
| Post-Installation Level Adjustment | ±4° |
| 재료 | 금속 |
| 색상 | 검은색 |
Image: TV compatibility details including size, weight, VESA patterns, and supported wall types.
설정 및 설치
Follow these steps for a secure installation. A drill mounting template and all necessary hardware are included. For concrete walls, 10x50mm concrete anchors may be required; contact customer service if not included.
- Step 1: Attach TV Brackets to TV. Secure the TV brackets to the back of your television using the appropriate screws and spacers provided. Ensure the brackets are aligned with your TV's VESA mounting holes.
- Step 2: Install Wall Plate.
- Locate wood studs using a stud finder or mark positions for concrete/brick wall anchors.
- Use the provided drill mounting template to mark pilot holes on the wall.
- Drill pilot holes and securely fasten the wall plate to the wall using the lag bolts. Ensure the wall plate is level using a spirit level.
- Step 3: Hang TV on Wall Plate. Carefully lift the TV (with brackets attached) and hook it onto the wall plate. Ensure the TV is securely seated on the mount.
- Step 4: Secure TV to Mount. Use the quick-release straps or locking screws to secure the TV to the wall plate, preventing accidental dislodgement.
Image: Pre-assembled design and drilling for easy installation.
Video: Demonstrates the TV mount function and installation steps.
작동 지침
This full motion TV mount allows for flexible view조정 사항:
- 기울기 조정: Tilt your TV up 5° and down 12° to reduce glare and find the perfect vertical view잉 각도.
- 회전 조정: Swivel your TV left or right up to 45° to view from different seating positions.
- 확장 및 수축: Extend the TV up to 13.89 inches from the wall or retract it back to 2.58 inches to save space.
- 설치 후 수평 조정: Fine-tune the TV's level by ±4° after installation for a perfectly straight display.
Image: Demonstrates the extensive viewing angles with a ±45° swivel.
Image: Illustrates space-saving features with extension, retraction, and tilt capabilities.
Image: Shows the post-installation leveling feature.
유지
TV 벽걸이 거치대의 수명과 안전한 작동을 보장하려면 다음 사항을 확인하십시오.
- 모든 나사와 볼트가 단단하고 안전하게 고정되어 있는지 정기적으로 점검하세요.
- Inspect the mount for any signs of wear, damage, or corrosion.
- 부드럽고 마른 천으로 마운트를 닦으십시오. 연마성 세척제나 용제를 사용하지 마십시오.
- If any part is damaged or missing, contact customer service for replacement parts.
문제 해결
TV 벽걸이 거치대에 문제가 발생하면 다음의 일반적인 해결 방법을 참조하십시오.
- TV가 수평이 아닙니다: Use the post-installation leveling adjustment feature (±4°) to correct the tilt. Ensure the wall plate was installed level initially.
- 마운트가 느슨해진 느낌: Re-check all mounting screws and bolts on both the wall plate and the TV brackets. Ensure they are tightened securely.
- Difficulty adjusting movement (swivel/tilt/extension): The bolts controlling the articulating arms may be too tight. Loosen them slightly to allow for smoother movement, then re-tighten to the desired tension.
- TV not securely attached to wall plate: Ensure the quick-release straps or locking screws are properly engaged after hanging the TV.
If problems persist, please contact USX STAR customer service for assistance.
보증 및 지원
USX STAR provides a 10-year after-sales service for this product. For any pre-purchase questions, installation assistance, or support, please contact our US-based customer service team.
Contact information can typically be found on the product packaging or the official USX STAR web대지.