DATOUBOSS Infrared Paint Curing Lamp 2000W (Model DT-003) - Instruction Manual

1. 제품 오버view

The DATOUBOSS Infrared Paint Curing Lamp (Model DT-003) is a 2000W device designed for efficient paint curing in automotive body repair and other applications. It utilizes shortwave infrared technology to dry paint from the inside out, ensuring a high-quality finish.

Figure 1: DATOUBOSS Infrared Paint Curing Lamp (Model DT-003)

주요 특징:

• 2000W 전력: Provides strong and effective infrared heating.
• Shortwave Infrared Technology: Ensures deep penetration for thorough drying, reducing rework.
• 듀얼 스위치 제어: Independent control for each lamp tube, enhancing operational flexibility.
• 효율적인 열 발산: Aluminum alloy body with ventilation holes for extended service life.
• 다양한 응용 프로그램: Suitable for auto spray paint rooms, local paint drying, putty drying, and car spray baking booths.

2. 안전 정보

부상이나 장비 손상을 방지하려면 항상 다음 안전 예방 조치를 준수하세요.

• 전원 공급 장치가 l과 일치하는지 확인하십시오.amp요구 사항(110V).
• 뜨거운 걸 만지지 마세요amp surface during or immediately after operation. Allow sufficient cooling time.
• 내열 장갑과 눈 보호 장비 등 적절한 개인 보호 장비(PPE)를 착용하세요.
• 통풍이 좋은 곳에서 작업하세요.
• 가연성 물질을 l에 가까이 두지 마십시오.amp.
• l을 노출시키지 마십시오amp 물이나 과도한 습기.
• Unplug the unit when not in use or before performing any maintenance.

3. 설정

3.1 풀기

모든 구성품을 포장에서 조심스럽게 꺼내십시오. 손상된 부분이 있는지 확인하십시오. 나중에 보관하거나 운반할 수 있도록 포장을 보관하십시오.

Figure 2: Product Information and Dimensions of the DT-003 Lamp.

3.2 핸들 설치

Attach the handle to the top of the lamp unit using the provided screws and tools. Ensure it is securely fastened for safe handling.

Figure 3: Close-up of the dual switch control and handheld switch on the lamp.

3.3리터amp 튜브 설치

l이면amp tubes are not pre-installed, carefully insert them into their sockets. Ensure they are properly seated and secured. Refer to the video for visual guidance.

Figure 4: The two 1000W paint lamp tubes and the protective safety net.

3.4 스탠드 조립 (선택 사항)

If using a stand, attach the lamp unit to the stand's mounting bracket. Adjust the height and angle as needed for your application. Ensure the stand is stable before operation.

4. 사용 설명서

4.1 전원 켜기 및 끄기

l을 연결하세요amp to a 110V power outlet. The unit features dual switch control, with each switch corresponding to a lamp tube. To activate, press the handheld switch. Release to turn off. For continuous operation, press the handheld switch and then engage the switch lock. Release the switch lock to turn off continuous operation.

4.2 Curing Process

The shortwave infrared technology provides high luminous efficiency and strong penetrating power, allowing paint to dry from the inside out. This results in a high surface gloss and strong coating adhesion, minimizing wrinkles and tears.

Figure 5: Explanation of shortwave infrared technology and its deep penetration for paint curing.

4.3 신청 지침

난amp is suitable for various applications, including:

• Automotive spray paint rooms
• Local paint drying
• Drying putty
• Car spray baking booths
• Car film application
• 금속가공
• Furniture drying
• Advertising construction

Figure 6: Visual representation of the diverse applications for the infrared paint curing lamp.

5. 유지관리

5.1 청소

정기적으로 l을 청소하십시오amp's exterior with a soft, dry cloth. Ensure the unit is unplugged and completely cool before cleaning. Do not use abrasive cleaners or solvents.

5.2 방열

The aluminum alloy body and numerous small holes are designed for optimal heat dissipation. Keep these vents clear of obstructions to maintain efficient cooling and prolong the lamp's service life.

그림 7: l의 그림amp's aluminum alloy shell and cooling holes for effective heat dissipation.

5.3리터amp 튜브 교체

만약 모든amp tube needs replacement, ensure the unit is unplugged and cool. Carefully remove the old tube and install a new one, following the reverse steps of installation. Refer to the lamp tube installation video in Section 3.3 for guidance.

6. 문제 해결

If you encounter issues with your DATOUBOSS Infrared Paint Curing Lamp, 다음의 일반적인 문제와 해결책을 참조하세요.

• Lamp 켜지지 않음: Check power connection, ensure switches are in the 'ON' position, and verify the power outlet is functional.
• 열 출력이 부족합니다. Ensure both lamp tubes are functioning. Verify the power setting (if applicable) is correct.
• 과열: Check for obstructions around the ventilation holes. Ensure operation in a well-ventilated area.

문제가 지속되는 경우 고객 지원팀에 문의하세요.

7. 사양

상자 안에 무엇이 들어있나요?

• Infrared paint curing lamp * 1
• Lamps * 1 (referring to the heating elements/tubes)

8. 보증 및 지원

For warranty information or technical support, please refer to the documentation included with your product or visit the official DATOUBOSS web고객 서비스 연락처는 일반적으로 제품 포장에 기재되어 있습니다.