CREWORKS 15x15인치 8-in-1 열전사 프레스기 사용 설명서

소개

The CREWORKS 15x15 Inch 8-in-1 Heat Press Machine is a versatile tool designed for heat transfer printing on various materials, including fabrics, ceramics, and more. This machine features a 15x15 inch heat pad and comes with multiple attachments for mugs, plates, and hats, offering extensive creative possibilities. It is equipped with a digital control panel for precise temperature and timer settings, ensuring uniform heat distribution and safe operation with built-in overload protection.

Image: The 8-in-1 heat press machine showcasing its main unit and various attachments for different applications like T-shirts, hats, plates, and mugs.

안전 지침

Please read all safety instructions carefully before operating the heat press machine to prevent injury or damage to the equipment.

• 기계는 항상 안정적이고 내열성이 있는 표면에서 작동하십시오.
• 화상을 방지하기 위해 작동 중에는 가열판에서 손과 손가락을 깨끗이 치워 두십시오.
• 작업 공간의 적절한 환기를 보장하십시오.
• Do not touch the heating elements immediately after use; allow them to cool down completely.
• 사용하지 않을 때나 청소/유지관리를 하기 전에는 기기의 플러그를 콘센트에서 뽑아 두세요.
• 전원 코드나 플러그가 손상된 경우에는 기계를 작동하지 마십시오.
• This machine is equipped with overload protection. If an alarm sounds or the machine shuts down unexpectedly, unplug it and allow it to cool before inspecting.
• 어린이의 손이 닿지 않는 곳에 보관하세요.

패키지 내용

아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.

• 1x Heat Press Machine (Main Unit)
• 1x Hat Press Attachment
• 2x Plate Press Attachments (5 inch & 6 inch)
• 4x Mug Press Attachments (9, 11, 12, & 17 fl. oz.)
• 1x Mug Press (Base for mug attachments)
• 1x 전원
• 1x Protective Cover Sheet
• 1x Slide Handle
• 1x Hardware Package
• 1x Dual-Purpose Screwdriver
• 2x Work Gloves
• 1x 지침 설명서

Image: All components of the CREWORKS 8-in-1 Heat Press Machine, including the main unit, various mug and plate attachments, hat press, and tools.

부품 다이어그램

Familiarize yourself with the different parts of your heat press machine:

Image: A detailed diagram labeling the key components of the heat press machine, such as the lift handle, adjustment knob, control panel, flat platen, silicone mat, and slide handle.

• 1. Lift Handle: Used to raise and lower the heating platen.
• 2. Adjustment Knob: Adjusts the pressure of the heat press.
• 3. 제어판: Digital display for temperature and timer settings.
• 4. Control Box: 전자 부품들을 담고 있습니다.
• 5. Power Inlet: 전원 코드 연결부입니다.
• 6. 리셋 버튼 : Used to reset the machine after overload protection activation.
• 7. 전원 스위치: 기계를 켜거나 끕니다.
• 8. Signal Port/Cable: 본체에 부속품을 연결합니다.
• 9. Flat Platen: The main heating surface (15x15 inch).
• 10. Pressure Plates: Distribute pressure evenly.
• 11. Swing Handle: Allows the heating platen to swing away 360 degrees.
• 12. Silicone Mat: Provides a soft, heat-resistant surface for pressing.
• 13. Foam Mat: Additional cushioning layer.
• 14. Flat Base: The stable base of the machine.
• 15. Slide Handle: Used to pull out the lower platen for easier placement of items.

설정

1. 짐 풀기: 모든 구성품을 포장에서 조심스럽게 꺼내세요. 나중에 보관하거나 운반할 수 있도록 포장을 보관하세요.
2. 놓기: Place the main heat press unit on a sturdy, level, and heat-resistant surface. Ensure there is adequate space around the machine for the swing-away function and ventilation.
3. 전원 연결: Connect the power cord to the power inlet on the control box and then plug it into a grounded electrical outlet.
4. Attachment Installation (if applicable):
   • For mug or plate attachments, connect the corresponding attachment cable to the signal port on the main unit. Ensure a secure connection.
   • For the hat press attachment, follow the specific instructions provided with the attachment for mounting it to the main unit.
5. 압력 조정: Turn the adjustment knob clockwise to increase pressure and counter-clockwise to decrease pressure. Test the pressure by closing the platen without an item; it should require moderate effort to close and open.

작업

디지털 제어판

이미지: 클로즈업 view of the digital control panel, showing the temperature and timer displays, adjustment buttons, and indicators.

The digital control panel allows precise setting of temperature and time.

• 전원 켜기/끄기: Use the red power switch on the side of the control box.
• 설정 온도:
  1. Press the "SET" button once. The temperature display will flash.
  2. Use the "+" and "-" buttons to adjust the desired temperature (Range: 93-259°C or 200-499°F).
  3. Press "SET" again to confirm.
• 타이머 설정:
  1. Press the "SET" button twice. The timer display will flash.
  2. Use the "+" and "-" buttons to adjust the desired time (Range: 1-999 seconds).
  3. Press "SET" again to confirm.
• Starting/Stopping Timer: Once the desired temperature is reached, press the "MODE" button to start the timer when the platen is closed. An audible alarm will sound upon completion.

Heat Transfer Process (General)

1. 항목 준비: Place the item (e.g., T-shirt, mug, plate) on the appropriate platen or attachment. Ensure it is flat and free of wrinkles.
2. 위치 설계: Place your transfer paper or vinyl design onto the item. Use heat-resistant tape if necessary to secure it.
3. 예열 : Turn on the machine and set the desired temperature and time according to your transfer material's specifications. Allow the machine to reach the set temperature.
4. 누르다:
   • For flat items: Swing the heating platen over the item and lower the lift handle to apply pressure.
   • For mug/plate/hat attachments: Secure the item in the attachment and close the press mechanism.
   The timer will start automatically or can be manually started depending on the model.
5. 완성: Once the timer reaches zero, an alarm will sound. Lift the handle to release pressure and swing the heating platen away (for flat press). Carefully remove the item.
6. 쿨다운: Allow the item and transfer to cool before peeling (hot peel or cold peel, as per transfer instructions).

Image: A user demonstrating the use of the heat press machine to apply a design onto a T-shirt, highlighting the swing-away feature.

유지

정기적인 유지관리는 열 프레스 기계의 수명과 최적의 성능을 보장합니다.

• 플래튼 청소: Allow the heating platen to cool completely. Use a soft, damp cloth to wipe away any residue or debris. For stubborn stains, a specialized heat press platen cleaner may be used, following the cleaner's instructions.
• Silicone Mat Care: Regularly inspect the silicone mat for tears or damage. Clean it with a damp cloth. Replace if significantly damaged to ensure even pressure.
• 매끄럽게 하기: Periodically apply a small amount of high-temperature grease to moving parts like the swing arm pivot points and the slide rail to ensure smooth operation.
• 전기 연결: Periodically check all electrical connections and the power cord for any signs of wear or damage. Do not use the machine if any damage is found.
• 저장: 사용하지 않을 때는 직사광선과 극한 온도 변화를 피해 깨끗하고 건조한 곳에 보관하십시오.

문제 해결

명세서

보증 및 지원

For warranty information, technical support, or service inquiries, please refer to the contact details provided with your purchase documentation or visit the official CREWORKS website. Please have your model number (XYD-003) and purchase date ready when contacting support.

추가 지원이 필요한 경우 다음을 참조할 수도 있습니다. product page on Amazon.sg for updated information or customer service contacts.