렉트론 테슬라(NACS) V-Box Pro 48 Amp 레벨 2 전기차 충전소 사용 설명서

1. 서론

This manual provides essential information for the safe and efficient operation of your Lectron Tesla (NACS) V-Box Pro 48 Amp Level 2 EV Charging Station. Please read this manual thoroughly before installation and use, and retain it for future reference.

The Lectron V-Box Pro is a powerful Level 2 EV charger designed for all Tesla models (S/3/X/Y & Cybertruck). It offers flexible charging options with multiple amperage settings (16, 32, 40 & 48A) and versatile installation choices, including NEMA 14-50 plug-in or hardwired connection.

2. 안전 정보

경고: 이 안전 지침을 따르지 않을 경우 화재, 감전, 심각한 부상 또는 사망에 이를 수 있습니다.

• The Lectron V-Box Pro is UL2594 compliant for safety, FCC and Energy Star certified for efficiency, and IP65 weatherproof rated for use in challenging weather conditions.
• 설치는 모든 지역 및 국가 전기 규정에 따라 자격을 갖춘 전기 기술자가 수행해야 합니다.
• Do not use the charging station if the enclosure, cable, or connector is damaged.
• 충전소가 올바르게 접지되었는지 확인하세요.
• 충전 스테이션이나 그 구성품을 물에 담그지 마십시오.
• 충전 중에는 어린이가 충전소에 접근하지 못하도록 하십시오.
• Do not use extension cords or adapters unless explicitly approved by the manufacturer.

3. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• Lectron Tesla (NACS) V-Box Pro Charging Station
• 16ft Charger Cord with NACS Connector
• NEMA 14-50 Plug (pre-attached for plug-in models)
• J-Hook Mount for Cable Management
• 장착 하드웨어(나사, 앵커)
• 사용 설명서

4. 사양

5. 설정 및 설치

The Lectron V-Box Pro offers two installation methods: NEMA 14-50 plug-in or hardwired. Ensure you have the appropriate electrical infrastructure before proceeding.

5.1 충전 스테이션 장착

1. Choose a suitable mounting location near your NEMA 14-50 outlet or electrical panel for hardwiring. The location should be protected from direct impact and allow for easy access to your vehicle.
2. Use the provided mounting template (if included) or measure the mounting holes on the back of the charging station.
3. Drill pilot holes and insert the appropriate wall anchors.
4. 제공된 나사를 사용하여 장착 브래킷을 벽에 고정합니다.
5. Carefully attach the charging station to the mounted bracket.

5.2 전기 연결

IMPORTANT: All electrical work must be performed by a licensed electrician.

NEMA 14-50 Plug-in Installation (40A Max)

• For plug-in models, the NEMA 14-50 plug is pre-attached.
• Ensure your NEMA 14-50 outlet is on a dedicated 50A circuit.
• Simply plug the charging station into the NEMA 14-50 outlet.

Hardwired Installation (48A Max)

• For hardwired installations, consult the detailed wiring instructions provided in the separate hardwired installation guide (if applicable) or by a qualified electrician.
• The charging station supports up to 48A when hardwired to a dedicated 60A circuit.

5.3 케이블 관리

• Install the provided J-Hook mount near the charging station to neatly store the charging cable when not in use. This helps protect the cable from damage and keeps the area tidy.

Figure 1: Lectron V-Box Pro mounted with J-Hook for cable management.

6. 사용 설명서

6.1 Connecting to Your Tesla

1. Ensure the Lectron V-Box Pro is properly installed and powered on. The LED indicator should show a blue light for connection readiness.
2. Open the charging port on your Tesla vehicle.
3. Grasp the NACS connector firmly and insert it into your Tesla's charging port until it clicks into place.
4. The charging station will automatically begin charging, and the LED indicator will change to green.

Figure 2: NACS connector securely plugged into a Tesla vehicle.

6.2 조정 Amp시대 설정

The Lectron V-Box Pro allows for flexible amperage settings (16, 32, 40, and 48A) to match your electrical supply and charging needs. Refer to the specific instructions on the device or accompanying documentation for how to adjust these settings. Always ensure the selected amperage does not exceed the capacity of your circuit breaker.

6.3 App Control (for WiFi-enabled models)

If you have a WiFi-enabled version of the V-Box Pro, you can manage charging remotely, schedule charging times, and track usage via the Lectron app. Download the official Lectron app from your device's app store and follow the in-app instructions to connect your charging station.

7. LED 표시등 상태

The V-shaped LED light on the charging station provides visual feedback on its status:

• 블루 라이트: Indicates the charging station is powered on and ready for connection.
• 녹색불: 충전 중임을 나타냅니다.
• 빨간불: Indicates a warning or error. Refer to the troubleshooting section or contact support if the red light persists.

Figure 3: LED Charging Status Indicators.

8. 유지관리

Regular maintenance ensures optimal performance and longevity of your Lectron V-Box Pro:

• 청소: Wipe the exterior of the charging station and cable with a soft, damp 옷감. 강한 화학 물질이나 연마성 세제를 사용하지 마십시오.
• 점검: Periodically inspect the charging cable, connector, and the station's enclosure for any signs of damage, wear, or corrosion. If any damage is found, discontinue use and contact customer support.
• 케이블 보관: Always coil the charging cable neatly on the J-Hook when not in use to prevent kinks and damage.

9. 문제 해결

If you encounter issues with your Lectron V-Box Pro, try the following steps:

• No Power/No Blue LED: Check the circuit breaker for the NEMA 14-50 outlet or hardwired connection. Ensure the outlet is live.
• 빨간색 LED 표시기: This indicates an error. Unplug the charger from the vehicle and the power source, wait a few minutes, and then reconnect. If the error persists, consult the full troubleshooting guide (if provided separately) or contact customer support.
• 충전하지 않음: Ensure the NACS connector is fully inserted into the vehicle's charging port. Check the vehicle's charging settings to ensure it's not set to a delayed charge.
• 느린 충전: 확인하다 amperage setting on the charging station (if adjustable) matches your desired charging speed and circuit capacity.

10. 보증 및 지원

For warranty information, technical support, or service inquiries, please refer to the official Lectron web사이트를 방문하거나 고객 서비스에 직접 문의하세요. 보증 청구를 위해 구매 증빙 자료로 구매 영수증을 보관하세요.