소개
Thank you for choosing the SEESII Cordless Impact Wrench WH10 Ultra Pro. This powerful and versatile tool is designed for efficient tightening and loosening of fasteners in various applications, from automotive repair to construction. This manual provides essential information for safe operation, proper maintenance, and optimal performance of your impact wrench. Please read it thoroughly before use and keep it for future reference.
Image: The SEESII Cordless Impact Wrench WH10 Ultra Pro with a battery attached.
안전 정보
화재, 감전, 신체 상해의 위험을 줄이려면 전동 공구를 사용할 때 항상 기본적인 안전 예방 조치를 따르세요.
- 눈 보호 장비 착용: 항상 보안경 또는 측면 실드가 있는 보안경을 착용하십시오.
- 청력 보호 장비를 착용하세요: Prolonged use may cause hearing damage.
- 작업 공간을 깨끗하게 유지하세요: 어수선한 지역은 사고를 유발합니다.
- 위험한 환경을 피하십시오: 전동공구를 사용하지 마십시오amp 젖은 장소 또는 비에 노출시키십시오.
- 어린이의 접근을 차단하세요: 모든 방문자는 작업 영역에서 안전한 거리를 유지해야 합니다.
- 적절한 옷차림: 헐렁한 옷이나 장신구를 착용하지 마십시오. 긴 머리를 포함합니다.
- 안전한 작업물: cl을 사용하세요amp또는 작업물을 고정하기 위한 바이스.
- 지나치지 마십시오: 언제나 적절한 발판과 균형을 유지하세요.
- 연결 해제 도구: Disconnect the battery pack when not in use, before servicing, or when changing accessories.
- 올바른 도구 사용: 설계되지 않은 작업을 도구 또는 부착물에 강제로 수행하지 마십시오.
- 도구를 주의해서 관리하세요: 더 좋고 안전한 성능을 위해 도구를 날카롭고 깨끗하게 유지하십시오.
- 손상된 부품 확인: 공구를 추가로 사용하기 전에 손상된 보호대 또는 기타 부품이 제대로 작동하고 의도한 기능을 수행하는지 신중하게 확인해야 합니다.
- 배터리 안전: Use only specified battery packs. Do not incinerate the battery pack even if it is severely damaged.
패키지 내용
Your SEESII Cordless Impact Wrench WH10 Ultra Pro package includes the following items:
- 1 x Impact Wrench
- 2 x 4.0Ah Battery Packs
- 1 x 고속 충전기
- 4 x Impact Sockets (17mm, 19mm, 21mm, 24mm)
- 1 x 확장 바
- 1 x Hard Portable Toolbox
- 1 x 사용자 설명서
Image: All components included in the SEESII Cordless Impact Wrench WH10 Ultra Pro kit, including the wrench, two batteries, charger, sockets, extension bar, and hard case.
설정
1. 배터리 충전
Before first use, fully charge both 21V/4.0Ah battery packs. The fast charger can charge the battery to approximately 80% capacity in 30 minutes. The 3-LED power indicator on the battery will show the charging status.
2. 배터리 설치/제거
- 설치: Align the battery pack with the base of the impact wrench and slide it in until it clicks securely into place.
- 제거: Press the battery release button (usually located on the side of the battery) and slide the battery pack out.
Image: A person installing a battery pack into the base of the SEESII Cordless Impact Wrench.
3. 소켓 부착
The impact wrench features a 1/2-inch square drive. To attach a socket, simply push it onto the square drive until it locks into place. To remove, pull the socket off the drive.
Image: A set of four impact sockets (17mm, 19mm, 21mm, 24mm) included with the wrench.
작동 지침
1. 전원 켜기/끄기 및 가변 속도 트리거
To operate the wrench, insert a charged battery and press the variable-speed trigger. The speed of the wrench is controlled by how much you depress the trigger. A locking switch prevents accidental activation during transport.
2. 속도 모드
The SEESII impact wrench offers 3 optimized gear settings for various tasks:
- 1st Gear (Low): 0-1400 RPM / 1900 IPM - Ideal for delicate work and precise applications.
- 2nd Gear (Medium): 0-1900 RPM / 2500 IPM - Suitable for standard bolts and general tasks.
- 3rd Gear (High): 0-2400 RPM / 2900 IPM - For stubborn nuts and heavy-duty applications.
Use the mode selection button to cycle through the speed settings.
Image: Diagram illustrating the three speed modes (Low, Medium, High) with corresponding RPM and IPM values, along with an auto-stop feature.
3. 정방향/역방향 제어
A one-touch switch allows you to easily change the rotation direction for tightening or loosening fasteners. Ensure the switch is in the desired position before operating.
4. Auto-Stop Function
The auto-stop feature is designed to prevent over-tightening damage. In reverse mode, it helps prevent nuts or bolts from being flung out by automatically stopping rotation once the fastener is loose.
Image: Illustration of the auto-stop function preventing bolts from being flung out during reverse operation.
5. LED 작업등
The integrated ultra-bright LED work light illuminates the work area, improving visibility in dark or dimly lit conditions.
6. High Torque Performance
The brushless motor delivers up to 750 ft-lbs (1000 N.m) tightening torque and 900 ft-lbs (1200 N.m) loosening torque, making it suitable for demanding tasks like removing rusted bolts or installing truck wheels.
Image: A person using the SEESII Impact Wrench to remove a lug nut from a vehicle wheel.
Image: A worker using the SEESII Impact Wrench on a scaffolding structure.
7. 제품 오버view 동영상
비디오: 포괄적인view and feature introduction of the SEESII Cordless Impact Wrench. This video demonstrates the tool's capabilities and various components.
8. Torque Demonstration Video
Video: A short demonstration highlighting the 900 ft-lbs of power, showing the wrench breaking free stubborn bolts.
유지
Proper maintenance ensures the longevity and optimal performance of your impact wrench.
- 청소: 도구 외부를 부드러운 천으로 정기적으로 청소하십시오.amp 천으로 닦으세요. 강한 화학 물질이나 연마성 세제는 사용하지 마세요. 환기구에 먼지나 이물질이 없도록 하세요.
- 배터리 관리 : 배터리는 직사광선과 극한의 온도를 피해 서늘하고 건조한 곳에 보관하십시오. 완전히 방전된 배터리를 장시간 보관하지 마십시오.
- 점검: Periodically inspect the tool for any signs of damage, loose screws, or worn parts. If any damage is found, discontinue use and contact customer support.
- 저장: When not in use, store the impact wrench and its accessories in the provided hard portable toolbox, in a dry, secure location out of reach of children.
문제 해결
임팩트 렌치 사용 중 문제가 발생하면 다음의 일반적인 문제 해결 단계를 참조하십시오.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 도구가 시작되지 않음 | Battery not charged or improperly installed; Locking switch engaged | Ensure battery is fully charged and correctly inserted. Disengage the locking switch. |
| 감소된 출력/토크 | Low battery charge; Incorrect speed mode selected | Recharge battery. Select a higher speed mode (2nd or 3rd gear). |
| 과열 | Prolonged heavy use; Blocked ventilation | Allow tool to cool down. Clear any obstructions from ventilation slots. The intelligent chip includes overheating protection. |
| 소켓이 제대로 고정되지 않음 | Debris in square drive; Worn square drive or socket | Clean the square drive. Replace worn sockets or contact support if the drive is damaged. |
If the problem persists after attempting these solutions, please contact SEESII customer support.
Image: A visual representation of the smart chip inside the SEESII Impact Wrench, highlighting its protection features against overcurrent, overvoltage, overtemperature, and short-circuits.
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | 시시 |
| 모델 번호 | WH10 Ultra Pro |
| 재료 | Metal, Chrome Vanadium Steel |
| 품목 무게 | 4파운드(약 1.8kg) |
| 머리 스타일 | Square Drive (1/2 inch) |
| 최대 조임 토크 | 750 ft-lbs (1000 N.m) |
| 최대 풀림 토크 | 900 ft-lbs (1200 N.m) |
| 작동 모드 | 배터리 |
| 권tage | 21 볼트 |
| 배터리 용량 | 2 x 4.0Ah 리튬 이온 배터리 |
| 무부하 회전 속도(RPM) | Gear 1: 0-1400 RPM Gear 2: 0-1900 RPM Gear 3: 0-2400 RPM |
| 분당 영향(IPM) | Gear 1: 0-1900 IPM Gear 2: 0-2500 IPM Gear 3: 0-2900 IPM |
| 치수(길이 x 너비 x 높이) | 6.46 x 2.76 x 8.58인치(대략) |
| 특징 | Brushless Motor, Variable Speed Trigger, 3 Speed Modes, Forward/Reverse Control, Auto-Stop Function, LED Work Light, Smart Protection Chip |
보증 및 지원
The SEESII Cordless Impact Wrench WH10 Ultra Pro comes with a 3년 제조사 보증 against defects. For warranty claims, technical assistance, or any product-related inquiries, please contact Seesii customer support. Keep your purchase receipt as proof of purchase.
Manufacturer: Seesii