OutVue 32-inch Propane Fire Pit Table Instruction Manual

중요한 안전 정보

WARNING: For your safety, read and understand all instructions before assembling or operating this product. Failure to follow these instructions could result in fire, explosion, serious injury, or death.

캘리포니아 주 법률 제65호 경고: 이 제품에는 일산화탄소를 포함한 화학 물질이 함유되어 있으며, 일산화탄소는 캘리포니아 주에서 선천적 기형 또는 기타 생식 기능 장애를 유발하는 것으로 알려져 있습니다. 자세한 내용은 다음 웹사이트를 참조하십시오. www.P65Warnings.ca.gov.

CHOKING HAZARD: Small parts. Not for children.

• Always ensure the gas supply is turned off when the fire pit is not in use and before covering.
• Keep the propane tank hose and valve away from high-temperature areas.
• 이 기기나 다른 기기 근처에서 가솔린이나 기타 가연성 증기 및 액체를 보관하거나 사용하지 마십시오.
• 작동 중에는 절대로 화덕을 무인 상태로 두지 마십시오.
• 가연성 물질로부터 안전한 거리를 유지하십시오.

제품 끝view 및 기능

The OutVue 32-inch Propane Fire Pit Table is designed for outdoor use, offering both a functional fire pit and a versatile table surface. Its 2-in-1 design allows it to serve as a warm gathering point or a convenient outdoor dining/coffee table when the fire is not in use.

그림 1: The OutVue fire pit table configured as a patio table (top) and as a propane fire pit (bottom).

Key features include a metal lid for conversion to a table, a 50,000 BTU burner for ample heat, and a quick-start electronic ignition system with variable flame control.

그림 2: 상세한 view of the fire pit's components including the pit lid, glass fire stone, control panel, and classic panel design.

패키지 내용

Before assembly, ensure all parts are present and undamaged. If any parts are missing or damaged, contact customer support.

• 1 x Round Propane Fire Pit Table
• 1 x Removable Metal Lid
• Lava Rocks (sufficient quantity for burner area)
• 조립 하드웨어 키트
• 사용 설명서

그림 3: Components such as the metal lid, stainless steel burner, and lava rocks.

조립 설명서

Assembly is required. Follow the steps carefully. It is recommended to have two people for assembly.

1. 구성 요소 풀기: 모든 부품을 포장에서 조심스럽게 꺼내세요. 긁힘을 방지하기 위해 부드럽고 깨끗한 표면에 놓으세요.
2. 기본 구조 조립: Attach the side panels to the main frame using the provided hardware. Ensure all screws are tightened securely but do not overtighten until all parts are aligned.
3. Install Burner Unit: Carefully place the stainless steel burner unit into the designated opening on the tabletop. Connect the gas hose to the burner unit as per the diagram in the separate assembly guide.
4. 테이블탑 부착: Secure the tabletop to the assembled base structure. Ensure proper alignment before fully tightening all fasteners.
5. Install Access Door: Attach the access door to the side of the fire pit table, ensuring it opens and closes smoothly for propane tank access.
6. Place Lava Rocks: Distribute the lava rocks evenly around the burner in the fire bowl. Do not cover the igniter or burner ports.

Refer to the detailed diagrams in the included assembly manual for specific hardware and connection points.

설정

안전한 작동을 위해서는 적절한 설정이 중요합니다.

1. 위치: Place the fire pit table on a flat, stable, non-combustible surface outdoors. Ensure adequate clearance from walls, ceilings, and other combustible materials.
2. 프로판 탱크 연결:
   • Open the access door on the side of the fire pit table.
   • Place a standard 20-pound propane tank (NOT INCLUDED) inside the compartment.
   • Connect the regulator hose from the fire pit to the propane tank valve. Hand-tighten firmly.
   • Ensure the hose and valve are positioned away from any high-temperature areas of the fire pit.
   • Check all gas connections for leaks using a soapy water solution before first use. Bubbles indicate a leak.
3. 용암 바위 배치: Arrange the provided lava rocks over the burner ring. Do not obstruct the igniter electrode or the gas ports on the burner.

작동 지침

Follow these steps to safely ignite and operate your fire pit table.

그림 4: External control knob and igniter button for flame adjustment and ignition.

1. 조명 전: Ensure the area around the fire pit is clear of debris and flammable materials. Confirm the propane tank is securely connected and the gas valve is open.
2. 점화:
   • Locate the control knob and igniter button on the side panel.
   • Push and turn the control knob counter-clockwise to the 'LOW' position.
   • Immediately press and hold the igniter button. You should hear a clicking sound and see a spark.
   • Once the burner ignites, continue to hold the control knob for 10-15 seconds to allow the thermocouple to heat up.
   • 조절 손잡이를 놓으십시오. 불꽃이 꺼지면 점화 과정을 반복하십시오.
3. 화염 조절: Once lit, rotate the control knob to adjust the flame height from 'LOW' to 'HIGH' as desired.
4. 끄기:
   • Turn the control knob clockwise to the 'OFF' position.
   • 프로판 탱크의 밸브를 닫으세요.
   • Allow the fire pit and lava rocks to cool completely before covering or moving.

유지

Regular maintenance ensures the longevity and safe operation of your fire pit table.

• 청소: Clean the exterior surfaces with a soft cloth and mild soap solution. Avoid abrasive cleaners or harsh chemicals. Ensure the burner area is free of debris.
• 용암 바위: Periodically inspect lava rocks for deterioration. Replace if they become excessively crumbly or dusty.
• 저장: When not in use, especially during inclement weather or off-season, cover the fire pit table with a weather-resistant cover. Disconnect the propane tank and store it in a well-ventilated area, away from direct sunlight and heat sources.
• 검사: Regularly check the gas hose and connections for any signs of wear, cracks, or leaks.

문제 해결

문제가 발생하면 다음의 일반적인 문제와 해결 방법을 참조하세요.

제품 사양

Detailed specifications for the OutVue 32-inch Propane Fire Pit Table.

그림 5: Dimensions of the OutVue 32-inch Propane Fire Pit Table.

보증 및 지원

For any questions regarding assembly, operation, missing parts, or warranty claims, please contact OutVue customer support. Refer to your purchase documentation for specific warranty terms and contact information.

We are committed to providing replacement parts and assistance to ensure your satisfaction with the product.