소개
This manual provides essential information for the safe and effective use of your DATOUBOSS Infrared Paint Curing Lamp 2000W, Model ZJ-SC-002. Designed for automotive paint curing, this lamp utilizes advanced infrared technology to provide fast and even curing, enhancing coating quality and productivity. Please read this manual thoroughly before operation and retain it for future reference.
중요한 안전 정보
부상이나 장비 손상을 방지하려면 항상 다음 안전 예방 조치를 준수하세요.
- l을 확인하세요amp is connected to a grounded power outlet with the correct voltag전자(110V).
- l을 만지지 마세요amp surface or bulbs during operation or immediately after shutdown, as they will be extremely hot. Allow sufficient cooling time.
- 가연성 물질을 l에 가까이 두지 마십시오.amp 작동 중.
- Wear appropriate personal protective equipment (PPE), including heat-resistant gloves and eye protection, when operating or adjusting the lamp.
- l을 조작하지 마십시오.amp 젖은 또는 damp 정황.
- Ensure proper ventilation in the work area to dissipate heat and fumes.
- Regularly inspect the power cord for damage. Do not use if the cord is frayed or damaged.
- 어린이와 허가받지 않은 인원은 수술 구역에 접근하지 마십시오.
패키지 내용
아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.
- Infrared Curing Lamp (1개)
- Telescopic Bracket (1 unit)
- Connecting Plate (1 unit)
- Fixed Plate (1 unit)
- Hand Grip (1 unit)
- Hexagonal Wrench (1 unit)
- Fixing Nuts and Screws (set)
- 사용 설명서(본 문서)
그림 1: Included Accessories. This image displays the baking lamp, telescopic bracket, connecting plate, fixed plate, hand grip, hexagonal wrench, and fixing nuts.
설정 및 조립
Follow these steps to assemble your infrared paint curing lamp:
- 베이스 설치: Manually remove the nut from the lamp unit. Adjust the bolt to the middle position, align the two holes on the base of the lamp with the bolt, and then tighten the nut securely.
- Install the Connection Board: Align the internal thread through holes on the connecting plate with the holes on both sides of the mounting plate. Tighten the nuts and ensure the connecting plate is perpendicular to the mounting plate.
- Connect the Bracket: Remove the rotating nut on the top of the telescopic bracket. Align the hole in the middle of the connecting plate with the bracket's top, and tighten the nut to secure the lamp 스탠드에.
- 높이 조정: Use the two rotating devices on the bracket to adjust the height of the lamp 최적의 포지셔닝을 위해
그림 2: Step-by-step assembly guide for the lamp unit and stand.
그림 3: Adjustable height settings of the lamp on its telescopic stand.
동영상 1 : Assembly and basic operation of the infrared paint curing lamp. This video demonstrates how to attach the lamp to its stand and adjust its position.
작동 지침
The DATOUBOSS Infrared Paint Curing Lamp is designed for efficient and rapid paint drying. Follow these guidelines for optimal performance:
- 위치: l을 놓으세요amp at an appropriate distance from the surface to be cured. The adjustable bracket allows for flexible positioning and angle adjustment (up to 270 degrees).
- 전원 켜기: l을 연결하세요amp to a suitable 110V power source. Use the integrated timer and power control to set the desired curing time and intensity.
- 경화 과정: The shortwave infrared radiation penetrates the paint surface, heating it from the inside out for fast and even curing. The high reflectivity reflector ensures uniform heat distribution.
- 모니터링: Monitor the curing process to ensure desired results and prevent overheating. The lamp can reach a working temperature of 0-200 ℃ (0-392 ℉).
- 응용 프로그램: 이 lamp is suitable for automotive paint booths, localized paint drying, putty drying, engine drying, removing adhesive strips, drying filler, primer desiccant, and preheating before spraying.
그림 4: Lamp in operation, demonstrating fast drying capabilities on a vehicle.
그림 5: Adjustable working angle of the lamp, allowing for flexible positioning.
동영상 2 : Demonstration of the multi-head infrared paint curing lamp's adjustable features and operation. This video highlights the flexibility in positioning the lamp 머리.
유지
Proper maintenance ensures the longevity and optimal performance of your curing lamp:
- 청소: l을 확인하세요amp is unplugged and completely cooled before cleaning. Use a soft, dry cloth to wipe down the exterior. Do not use abrasive cleaners or solvents.
- 전구 교체: The halogen bulbs are replaceable. If a bulb fails, ensure the unit is unplugged and cooled. Carefully remove the old bulb and install a new one of the same type and wattage. Refer to the bulb manufacturer's instructions for specific replacement procedures.
- 저장: 사용하지 않을 때는 보관해두세요amp in a dry, clean environment, away from extreme temperatures and moisture.
문제 해결
If you encounter issues with your DATOUBOSS Infrared Paint Curing Lamp, 다음의 일반적인 문제와 해결책을 참조하세요.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Lamp 켜지지 않습니다. | No power supply, faulty power cord, or blown bulb. | Check power connection and outlet. Inspect power cord for damage. Replace bulb if necessary. |
| Uneven heating or curing. | 틀렸어amp positioning or distance, or dirty reflector. | 조정 lamp position and distance to the workpiece. Clean the reflector surface. |
| Lamp 과열 | Insufficient ventilation or prolonged use at maximum intensity. | Ensure adequate ventilation in the work area. Reduce operating time or intensity. |
| Missing assembly parts. | 포장 오류. | 도움이 필요하면 구매 세부 정보와 함께 고객 지원팀에 문의하세요. |
명세서
Technical specifications for the DATOUBOSS Infrared Paint Curing Lamp (Model ZJ-SC-002):
| 특징 | 세부 사항 |
|---|---|
| 모델 | DT-SC-002 (ZJ-SC-002) |
| 힘 | 2000와트 |
| Lamp 재료 | 할로겐 튜브 |
| 제품 소재 | Aluminum Alloy, Metal |
| 권tage | 110V/220V 50Hz/60Hz |
| Curing Area | 350 x 400mm(13.8 x 15.7인치) |
| Lamp 튜브 길이 | 270mm(10.6인치) |
| 작동 온도 | 0~200℃(0~392°F) |
| 순중량 | 1.91kg(4.21파운드) |
| 품목 무게 | 10.8 pounds (approx. 4.9 kg) - Note: Discrepancy with Net Weight from image, likely package weight. |
| 전원 | 코드식 전기 |
| 장착 유형 | 표면 실장 |
그림 6: 제품 치수 및 주요 기술 매개변수.
보증 및 지원
For warranty information, technical support, or to inquire about replacement parts, please refer to the contact details provided with your purchase or visit the official DATOUBOSS web사이트. 보증 청구를 위해 구매 증빙 자료로 구매 영수증을 보관하세요.