1. 서론
Thank you for choosing the USX MOUNT Universal Full Motion TV Wall Mount. This manual provides detailed instructions for safe installation, operation, and maintenance of your new wall mount. Please read this manual thoroughly before installation and keep it for future reference.
This mount is designed to securely hold 10-26 inch displays with a maximum weight of 10kg (22 lbs). It supports VESA mounting patterns of 50x50mm, 75x75mm, and 100x100mm.
Figure 1.1: USX MOUNT Universal Full Motion TV Wall Mount
2. 제품 사양
| 특징 | 사양 |
|---|---|
| 모델 | USX-WM1026 |
| 화면 크기 호환성 | 10~26인치 |
| 최대 하중 용량 | 10kg(22파운드) |
| VESA 호환성 | 50x50mm, 75x75mm, 100x100mm |
| 기울기 각도 | +30° / -30° |
| Swivel Angle (Wall Plate) | ±45° (depending on TV size) |
| 벽 거리 | 62mm |
| 재료 | 냉간압연강 |
| 색상 | 검은색 |
메모: Always verify your TV's weight, screen size, and VESA pattern before installation to ensure compatibility.
Figure 2.1: Compatibility Check for TV Size, VESA, Weight, and Wall Type
그림 2.2: 지원되는 VESA 마운팅 패턴
3. 안전 정보
Please read and understand all instructions before installation. If you have any questions, contact customer support. Improper installation may result in property damage or personal injury.
- Do not install this product on drywall or plasterboard alone. It must be mounted to a solid concrete wall or a wooden stud.
- Ensure the wall structure can safely support the combined weight of the mount and your display.
- 최대 하중 용량인 10kg(22lbs)을 초과하지 마십시오.
- 제공된 하드웨어만 사용하십시오. 부품이 누락되었거나 손상된 경우 고객 지원팀에 문의하십시오.
- Always have two people for installation, especially when lifting the TV.
- 설치하는 동안 어린이와 애완동물이 접근하지 못하도록 하세요.
4. 패키지 내용
Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or defective, please contact USX MOUNT customer service.
패키지에는 일반적으로 다음이 포함됩니다.
- 벽판 조립체
- TV 브라켓
- Mounting Hardware (screws, anchors, washers for various TV and wall types)
- 사용 설명서
5. 설치 가이드
안전한 설치를 위해 다음 단계를 주의 깊게 따르십시오.
5.1. 벽 종류를 선택하세요
This mount is suitable for installation on solid concrete walls or wooden studs. Do NOT install on drywall or plasterboard without securing to a stud.
Figure 5.1: Compatible Wall Types
5.2. 단계별 설치
- 월 플레이트 부착: Position the wall plate on your chosen wall location. Mark the drilling points. Drill pilot holes and secure the wall plate using appropriate screws and anchors for your wall type. Ensure it is level and firmly attached.
- Attach TV Bracket to TV: Secure the TV bracket to the back of your television using the provided VESA screws and washers that match your TV's VESA pattern. Ensure the bracket is centered and tightened securely.
- 벽걸이형 TV 거치대: Carefully lift the TV (with the bracket attached) and hook it onto the wall plate. Ensure the TV is properly seated and locked into place.
- 각도 조정: Adjust the TV to your desired viewing angle using the tilt and swivel mechanisms.
Figure 5.2: Simplified Installation Steps
6. 작동 및 조정
This full motion mount allows for flexible positioning of your display.
6.1. 기울기 조정
The TV bracket allows for a tilt range of +30 degrees upward and -30 degrees downward. Loosen the tilt adjustment knobs on the side of the TV bracket, set the desired angle, and then tighten the knobs to secure the position.
6.2. 회전 조절
The wall-side attachment allows for a swivel of up to 45 degrees left or right. The actual range of motion may vary depending on the size of your television. Gently push the TV to the desired left or right angle.
Figure 6.1: Tilt Adjustment and Wall Distance
7. 유지관리
정기적인 유지 관리는 TV 벽걸이 거치대의 수명 연장과 안전한 작동을 보장합니다.
- 주기적으로 확인하세요: Every few months, check that all screws and connections are tight and secure.
- 청소: 부드럽고 마른 천으로 마운트를 닦으세요. 연마성 세제나 용제를 사용하지 마세요.
- 매끄럽게 하기: 움직이는 부품들은 부드러운 작동을 위해 설계되었으며 일반적으로 윤활유가 필요하지 않습니다. 만약 움직임이 뻑뻑해지면 고객 지원팀에 문의하십시오.
8. 문제 해결
문제가 발생할 경우, 다음의 일반적인 문제 및 해결 방법을 참조하십시오.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| TV 수평이 맞지 않습니다. | Wall plate or TV bracket not installed level. | Carefully adjust the wall plate or TV bracket. Ensure all screws are tightened after adjustment. |
| 산이 불안정해 보인다 | Screws are loose or incorrect wall anchors used. | Re-check all mounting screws for tightness. Ensure appropriate anchors were used for your wall type. Do not exceed weight capacity. |
| 기울기/회전 조절이 어렵습니다 | 조절 손잡이가 너무 뻑뻑하거나 작동 메커니즘이 부드럽지 않습니다. | Loosen adjustment knobs slightly before attempting to move. If still stiff, contact customer support. |
For issues not listed here, or if problems persist, please contact USX MOUNT customer support.
9. 보증 및 지원
USX MOUNT provides a 10년 품질 보증 from the date of purchase for this product. This warranty covers manufacturing defects and ensures the product is free from defects in material and workmanship under normal use.
For warranty claims, technical support, or any questions regarding your USX MOUNT product, please contact our customer service team. Please have your purchase information and model number (USX-WM1026) ready when contacting support.