XTUGA SF-1 Wireless XLR Transmitter and Receiver User Manual

1. 서론

The XTUGA SF-1 is a versatile wireless XLR transmitter and receiver system designed to convert any wired XLR microphone into a wireless setup. It operates on the UHF band, offering enhanced interference resistance and stable signal transmission. This system supports both dynamic and condenser microphones with built-in 0V/5V/48V phantom power modes, making it suitable for a wide range of audio applications including live performances, recording, and PA systems.

Image: XTUGA SF-1 Wireless XLR Transmitter and Receiver units.

2. 제품 특징

• Wireless XLR Compatibility: Supports all XLR microphones, including dynamic and condenser types, with selectable 0V/5V/48V phantom power modes.
• 저지연 오디오: Features 24-bit audio resolution and 48K sampling frequency for impeccable audio performance with less than 2ms latency.
• UHF Band Superiority: Utilizes the UHF band for enhanced interference resistance from electronic devices like phones, TVs, and Wi-Fi.
• 다중 채널: Offers 16 selectable channels to ensure interference-free operation, even in crowded environments.
• 확장된 범위: Provides a wireless range of up to 164 feet (50 meters) for flexible stag전자 사용.
• 긴 배터리 수명: Built-in rechargeable lithium batteries offer 5-8 hours of continuous usage.
• Adjustable Volume/Gain: Features a VOL button to switch between 5 adjustable gain levels for optimal sound quality.

Image: Diagram illustrating the low latency (less than 2ms) of the wireless XLR system.

Image: Visual representation of the 50-meter transmission distance and UHF wireless technology.

Image: Illustration highlighting the 6-hour working time and Type-C charging port.

3. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• 1 x XTUGA SF-1 Transmitter
• 1 x XTUGA SF-1 Receiver
• 2 x USB 충전 케이블
• 1 x 사용 설명서
• 1 x XLR (male) to mono 6.35mm (male) audio adapter
• 1 x XLR (female) to mono 6.35mm (male) audio adapter

Image: A visual list of all included product accessories.

4. 설정 지침

Follow these steps to set up your XTUGA SF-1 wireless system:

1. 유닛 충전: Before first use, fully charge both the transmitter and receiver using the provided USB charging cables. The charging indicator light will show charging status.
2. 단위 식별: The unit labeled "TRANSMITTER" connects to your microphone. The unit labeled "RECEIVER" connects to your audio interface, mixer, or PA system.
3. Connect Transmitter to Microphone: Plug the XLR male end of the transmitter directly into the XLR female output of your microphone. Ensure a secure connection.
4. Connect Receiver to Audio Input: Plug the XLR female end of the receiver into an available XLR input on your audio interface, mixer, or PA system. If your input is 6.35mm, use the appropriate XLR to 6.35mm adapter provided.
5. 전원 켜기: Press and hold the POWER button on both the transmitter and receiver until their displays or indicator lights illuminate.
6. 페어링(자동): The units are designed to pair automatically upon power-on. The display on the transmitter and the RF indicator on the receiver will confirm a successful connection.
7. Select Phantom Power (for Condenser Mics): If using a condenser microphone, ensure the transmitter's phantom power setting is appropriate (48V or 5V). This can typically be adjusted via a dedicated switch or button on the transmitter. Refer to the 'Operating Instructions' section for details on phantom power selection.

Image: Diagram showing the compatibility of the SF-1 system with dynamic mics, condenser mics, recorders, mixers, and PA systems.

Image: Illustration demonstrating the system's versatility and support for 48V phantom power for condenser microphones.

5. 사용 설명서

Understanding the controls and functions of your SF-1 system:

Image: Detailed diagram of the transmitter and receiver with numbered components and their functions.

송신기 제어:

• XLR Female Plug: Connects to the microphone.
• 충전 표시등: 충전 상태를 나타냅니다.
• 모니터 디스플레이: Shows remaining power, signal strength, frequency, and channel.
• CH Button (Frequency Switch): Short press to switch between available UHF frequencies (16 channels).
• VOL Button (Volume Control): Short press to cycle through 5 gain/volume levels. For best sound quality, it is recommended to set the gear to 5.
• 전원 버튼: 전원을 켜거나 끄려면 길게 누릅니다.
• 충전 포트: 충전용 USB-C 포트.

수신기 표시기:

• XLR Male Plug: Connects to the audio input device.
• CHR (Charge) Indicator: 충전 상태를 나타냅니다.
• RF (Radio Frequency) Indicator: Illuminates when a stable wireless connection is established.
• AF (Audio Frequency) Indicator: Illuminates when audio signal is being received.
• 전원 버튼: 전원을 켜거나 끄려면 길게 누릅니다.
• 배터리 수준 표시기: 배터리 잔량을 표시합니다.
• 충전 포트: 충전용 USB-C 포트.

Channel and Frequency Management:

The SF-1 system offers 16 selectable UHF frequencies to minimize interference. If you experience signal drops or interference, short press the CH button on the transmitter to switch to a different frequency. The receiver will automatically sync to the new frequency.

Image: Depiction of multiple microphones connected to a mixer, illustrating the support for up to 16 simultaneous sets.

6. 유지관리

• 청소: 부드럽고 마른 천으로 제품을 닦으십시오. 연마성 세제나 용제를 사용하지 마십시오.
• 배터리 관리 : Recharge the units regularly, even if not in frequent use, to maintain battery health. Avoid fully depleting the battery before recharging.
• 저장: 직사광선과 극한의 온도를 피해 시원하고 건조한 곳에 보관하세요.
• 습기를 피하세요: Keep the devices away from water and high humidity to prevent damage to internal components.

7. 문제 해결

8. 사양

9. 보증 및 지원

For detailed warranty information and customer support, please refer to the official XTUGA web사이트를 방문하거나 고객 서비스에 직접 문의하세요. 보증 청구에 대비해 구매 증빙 자료로 구매 영수증을 보관하세요.

XTUGA Official Store: Visit the XTUGA Store on Amazon