중요 안전 지침
설치 및 사용 전에 모든 지침을 주의 깊게 읽어 주십시오. 나중에 참조할 수 있도록 이 설명서를 보관하십시오.
- 전원 공급 장치 볼륨을 확인하십시오.tage matches the product's requirements (110V-220V).
- This appliance is equipped with a leakage protection plug. Do not bypass or modify this safety feature.
- Do not immerse the towel warmer or its plug in water or other liquids.
- 청소나 유지관리 작업을 하기 전에는 항상 기기의 플러그를 뽑으세요.
- Do not allow children to operate or play with the towel warmer.
- Avoid placing flammable materials near the heated surfaces.
- The surface of the towel warmer can become hot during operation. Exercise caution to prevent burns.
- Install the towel warmer in a location where it is not exposed to direct water spray. The product has an IPX4 waterproof level, meaning it is resistant to splashing water.
- 전원 코드가 손상된 경우 위험을 방지하기 위해 제조업체, 서비스 대리점 또는 이와 유사한 자격을 갖춘 사람이 교체해야 합니다.
Image: The power plug features built-in leakage protection for enhanced safety during operation.
제품 끝view
The NJDQFA Heated Towel Warmer is designed to dry and warm towels, providing comfort and helping to reduce odors. It features a wall-mounted design with a foldable top shelf and integrated hooks for versatile storage.
주요 특징:
- 벽걸이형 디자인: Maximizes bathroom space.
- Foldable Top Shelf: Provides additional storage for towels or toiletries.
- 통합 후크: Four hooks for hanging items.
- 스마트 제어판: LCD digital display with touch controls for timer and temperature.
- 조정 가능한 타이머: 1 to 9-hour automatic shut-off function.
- 온도 조절: Heats between 30-70°C (86-158°F).
- 과열 보호: Built-in safety feature to prevent excessive heat.
- Leakage Protection Plug: 전기 안전성을 향상시킵니다.
- IPX4 방수 : Resistant to splashing water.
Image: The towel warmer features a spacious top shelf for storage and four integrated hooks for hanging towels or other items.
패키지 내용
패키지를 열 때 모든 구성품이 들어 있고 손상되지 않았는지 확인하세요.
- 1 x NJDQFA Heated Towel Warmer
- 1 x Installation Accessories Kit (screws, anchors, etc.)
- 1 x 사용자 매뉴얼(이 문서)
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | 65657660-블랙 |
| 색상 | 검은색 |
| 재료 | 알루미늄 합금 |
| 힘 | 95와트 |
| 권tage | 110V-220V |
| 온도 범위 | 30-70°C(86-158°F) |
| 타이머 기능 | 1-9시간 |
| 방수 수준 | IPX4 |
| 설치 방법 | Punching (Screw-In) / No Punching (Self-Adhesive) |
| 품목 무게 | 3 킬로그램 |
| 크기(대략) | 550mm (21.6") Width x 400mm (15.7") Height x 220mm (8.6") Depth (with shelf extended) |
Image: Approximate dimensions of the towel warmer, including width, height, and shelf depth.
설정 및 설치
The towel warmer offers two installation methods: punching (screw-in) for permanent mounting or no punching (self-adhesive) for smooth surfaces like ceramic tiles or glass walls. Choose the method suitable for your wall type.
일반 설치 참고 사항:
- Ensure the installation location is away from direct water spray and has a power outlet within reach of the cord.
- Use a level to ensure the towel warmer is mounted straight.
- Refer to the included installation accessories kit for specific hardware and instructions for your chosen method.
Punching (Screw-In) Installation:
- Mark the desired mounting points on the wall using the towel warmer as a template.
- 표시된 지점에 구멍을 뚫습니다.
- (벽 유형에 따라) 벽 고정 장치를 삽입합니다.
- Secure the mounting brackets to the wall with screws.
- Attach the towel warmer to the mounting brackets.
No Punching (Self-Adhesive) Installation:
This method is suitable for smooth, non-porous surfaces such as ceramic tiles or glass. Ensure the surface is clean and dry before application.
- Clean the wall surface thoroughly and allow it to dry completely.
- Apply the self-adhesive pads or strips to the back of the towel warmer's mounting points as per the accessory kit instructions.
- Carefully align the towel warmer and press it firmly against the wall for several seconds.
- Allow the adhesive to cure for at least 24-48 hours before hanging towels or applying weight.
이미지: 전amples of the towel warmer installed in a bathroom and on a balcony, demonstrating its versatility.
작동 지침
The towel warmer features an intuitive LCD digital display with touch controls.
Image: Close-up of the LCD digital display and touch controls for timer, temperature, and power.
전원 켜기/끄기:
- 켜기: 길게 누르세요 전원 버튼 (수직선이 있는 원) for 1 second. The display will illuminate.
- 끄려면: 길게 누르세요 전원 버튼 for 1 second. The display will turn off.
타이머 설정 :
- 기기의 전원이 켜진 상태에서 타이머 버튼 (시계 아이콘).
- Each press will cycle through the available timer settings from 1 to 9 hours. The selected time will be displayed.
- 설정된 시간이 경과하면 기기가 자동으로 꺼집니다.
온도 조정:
- 기기의 전원이 켜진 상태에서 온도 조절 버튼 (온도계 아이콘).
- Each press will adjust the temperature within the range of 30-70°C (86-158°F). The current temperature will be displayed.
- The towel warmer will maintain the set temperature until the timer expires or it is manually turned off.
Image: Illustration of the constant temperature drying and even heating capabilities of the towel warmer.
유지
정기적인 유지관리를 통해 타월 워머의 최적의 성능과 수명을 보장할 수 있습니다.
- 청소: Always unplug the unit and allow it to cool completely before cleaning. Wipe surfaces with a soft, damp 천으로 닦아주세요. 연마성 세제, 용제 또는 강한 화학 물질은 마감재를 손상시킬 수 있으므로 사용하지 마세요.
- 점검: 전원 코드와 플러그에 손상 흔적이 있는지 주기적으로 점검하십시오. 손상이 발견되면 사용을 중단하고 고객 지원 센터에 문의하십시오.
- 저장: If storing the unit for an extended period, ensure it is clean, dry, and stored in a cool, dry place.
문제 해결
일반적인 문제와 해결 방법은 다음 표를 참조하세요.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 수건보온기가 켜지지 않습니다. | No power supply; Power button not pressed correctly; Leakage protection tripped. | Ensure the plug is fully inserted into a working outlet. Press and hold the power button for 1 second. Check the leakage protection plug for a reset button if tripped. |
| Towel warmer is not heating. | Temperature set too low; Timer expired; Overheating protection activated. | Increase the temperature setting. Check the timer setting. Unplug the unit, wait 15-20 minutes, and plug it back in to reset overheating protection. |
| 디스플레이가 작동하지 않습니다. | Unit is off; Electrical issue. | Ensure the unit is powered on. If the problem persists, contact customer support. |
| Adhesive installation is not holding. | Surface not clean/dry; Adhesive not cured; Surface not suitable. | Ensure the surface is clean and dry. Allow sufficient curing time (24-48 hours). Consider using the punching (screw-in) method for more secure installation if the surface is unsuitable for adhesive. |
보증 및 지원
본 제품에는 제조사 표준 보증이 적용됩니다. 구체적인 보증 내용은 구매 시 제공된 설명서를 참조하시거나 판매점에 문의하십시오.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact NJDQFA customer service through the platform where you purchased the product or refer to the contact information provided in your purchase documentation.
Please have your model number (65657660-BLACK) and purchase date ready when contacting support.