중요한 안전 정보
설치 및 작동 전에 이 설명서를 주의 깊게 읽어 주십시오. 이 지침을 따르지 않을 경우 감전, 화재 또는 심각한 부상을 입을 수 있습니다.
- 설치는 모든 지역 및 국가 전기 규정에 따라 자격을 갖춘 전기 기술자가 수행해야 합니다.
- 충전기를 열거나, 분해하거나, 개조하지 마세요.
- 설치 또는 유지보수 작업을 하기 전에 반드시 전원 공급 장치를 차단하십시오.
- The charger is rated IP66 for indoor and outdoor use. However, avoid submerging the unit in water.
- 충전 중에는 어린이와 애완동물이 충전 구역에 접근하지 못하도록 하십시오.
- Use only with compatible Type 2 electric vehicles.
제품 끝view
The Teskee Wallbox 7.4kW Type 2 EV Charger (Model LX30-7.2KW) is designed for efficient and reliable charging of electric vehicles. It features adjustable current settings and robust protection for both indoor and outdoor environments.
주요 특징
- Fast and Stable Charging: Maximum charging power of 7.4 kW, with a maximum output current of 32 amps.
- 충전 전류 조절 가능: Selectable current settings of 16A, 24A, or 32A.
- 안전성과 신뢰성: Equipped with vehicle communication and safety protections, CE and RoHS certified, IP66 rated for water and dust resistance.
- 컴팩트한 디자인: Suitable for wall mounting in various locations including homes, apartments, hotels, and workplaces.
- 보편적 인 호환성 : Integrated Type 2 socket compatible with all electric and plug-in hybrid vehicles.
설정 및 설치
패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- Teskee Wallbox 7.4kW EV Charger Unit
- 장착 브래킷
- 장착 나사 및 벽면 플러그
- 사용 설명서 (본 문서)
장착 지침
The charger is designed for wall mounting. Choose a suitable location that is easily accessible for your vehicle and has a stable wall structure.
- 장착 브래킷을 템플릿으로 사용하여 벽에 드릴링 지점을 표시합니다.
- 구멍을 뚫고 벽 플러그를 삽입합니다.
- 제공된 나사를 사용하여 벽에 장착 브래킷을 고정합니다.
- Attach the charger unit to the mounting bracket.
전기 연결
WARNING: Electrical installation must be performed by a certified electrician.
- 설치 구역의 주 전원이 차단기에서 차단되었는지 확인하십시오.
- Connect the charger to a dedicated single-phase circuit (230V) with appropriate overcurrent protection (e.g., a 32A circuit breaker).
- Follow the wiring diagram provided with the charger for correct live, neutral, and ground connections.
- 전원을 복구하기 전에 모든 연결이 안전한지 확인하세요.
작동 지침
차량에 연결하기
- 차량을 주차하고 시동을 끄십시오.
- 전기차의 충전 포트 덮개를 여세요.
- Take the Type 2 charging cable from the Teskee Wallbox.
- Insert the charging connector firmly into your vehicle's charging port. Ensure it clicks into place.
- The charger will initiate communication with the vehicle and begin charging automatically.
충전 전류 조정
The Teskee Wallbox allows you to adjust the charging current to suit your needs or electrical infrastructure. The default current is 16A.
- Before connecting the charger to your vehicle, locate the button on the right side of the charging station.
- Press the button repeatedly to cycle through the available current settings: 16A, 24A, and 32A.
- The LED indicator on the charger will change to reflect the selected current (refer to the specific LED pattern in the full manual for details).
- Once the desired current is selected, connect the charger to your vehicle to begin charging at that rate.
충전 상태 표시기
The LED indicator on the front of the Teskee Wallbox provides visual feedback on the charging status:
- 솔리드 그린: 충전 준비 중이거나 완전히 충전되었습니다.
- 녹색 깜박임: 충전 중입니다.
- 단색 빨간색: 오류 또는 결함이 감지되었습니다. 문제 해결 섹션을 참조하십시오.
유지
Regular maintenance ensures optimal performance and longevity of your Teskee Wallbox.
- 청소: 충전기 외부를 부드러운 천으로 닦으세요.amp 천을 사용하십시오. 연마성 세제나 용제를 사용하지 마십시오. 청소하기 전에 충전기의 전원이 꺼져 있는지 확인하십시오.
- 케이블 검사: Periodically inspect the charging cable and connector for any signs of wear, damage, or fraying. If any damage is found, discontinue use and contact support.
- 환경 보호: The IP66 rating provides protection against dust and water jets. While designed for outdoor use, ensure the unit is not exposed to extreme physical impact or prolonged submersion.
문제 해결
If you encounter issues with your Teskee Wallbox, refer to the table below for common problems and solutions.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 충전기 전원이 켜지지 않습니다 | No power from the electrical supply; Circuit breaker tripped. | Check the main power supply and circuit breaker. Ensure the charger is correctly wired. |
| 충전이 시작되지 않습니다 | Cable not fully inserted; Vehicle not ready to charge; Charger fault. | Ensure the charging cable is securely connected to both the charger and the vehicle. Check vehicle's charging settings. If the issue persists, contact support. |
| 충전 속도가 느림 | Current setting is low; Vehicle limitation; Power supply issue. | Adjust the charging current to a higher setting (24A or 32A) using the button on the charger. Verify your vehicle supports higher charging rates. |
| 빨간색 LED 표시등 | Internal fault; Overcurrent/overvoltag전자 보호가 활성화되었습니다. | Disconnect the charger from the power supply for 5 minutes, then reconnect. If the error persists, contact Teskee support. |
명세서
Detailed technical specifications for the Teskee Wallbox 7.4kW Type 2 EV Charger.
| 특징 | 사양 |
|---|---|
| 모델 번호 | LX30-7.2KW |
| 상표 | 테스키 |
| 제조업체 | Jiangsu Wissenergy Technology Co., Ltd |
| 충전 전력 | 7.4kW(XNUMXkW) |
| Amp에라 지 | Adjustable: 16A / 24A / 32A |
| 권tage | 230 Volts (Single Phase) |
| 커넥터 유형 | 2형 |
| 침투 방지(IP) 등급 | IP66 |
| 충격 보호(IK) 등급 | 아이케이10 |
| 제품 무게 | 2.5kg |
| 패키지 크기 | 43 x 35 x 17.5cm |
| 특별 기능 | Wall-mount design, Easy installation, Waterproof, Compact size, Universal Type 2 compatibility |
범용 호환성
The Teskee Wallbox is designed with a universal Type 2 socket, ensuring compatibility with a wide range of electric vehicles and plug-in hybrids available on the market.
보증 및 지원
Teskee products are manufactured to high-quality standards and come with a standard warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Teskee web대지.
If you require technical assistance, have questions about installation, or need to report a fault, please contact Teskee customer support through the contact information provided on the product packaging or the official Teskee website. Please have your model number (LX30-7.2KW) and purchase details ready when contacting support.