Wireless Infrared Motion Sensor User Manual

1. 서론

The PGST Wireless Infrared Motion Sensor is an advanced security device designed to detect human movement and provide real-time alerts when paired with a compatible PGST home alarm system. It features intelligent logic analysis to minimize false alarms, low power consumption for extended battery life, and anti-white light/anti-radiation interference capabilities for reliable detection. This manual provides comprehensive instructions for installation, operation, and maintenance of your motion sensor.

2. 제품 특징

• Intelligent Logic Analysis: Advanced signal analysis and processing technology to prevent false alarms.
• 낮은 전력 소모: Utilizes CMOS low-power microprocessor for longer battery life.
• 낮은 볼륨tage Alert Function: Notifies user when battery power is low.
• 간섭 방지: Designed with anti-white light and anti-radiation interference functions for reliable detection.
• 간편한 설치: Can be mounted on room corners or flat walls with a bracket.
• 다양한 용도: Suitable for homes, office buildings, factories, banks, and other security-sensitive environments.
• 호환성: Works seamlessly with 433MHz PGST home alarm systems (e.g., PG103, PG105, PG106, PG107, PG108, PG109, PG500). Note: This sensor cannot be used standalone.

3. 제품 사양

참고: 사양은 사전 통지 없이 변경될 수 있습니다.

4. 설정 및 설치

Proper installation is crucial for optimal performance of your PGST Wireless Infrared Motion Sensor. Follow these steps carefully.

4.1. 구성 요소 이상view

Figure 4.1: Product Appearance and Components
1. Detection Window, 2. LED Indicator, 3. Installation Bracket.

Figure 4.2: Internal Components and Detection Range Diagram
This image illustrates the internal layout of the sensor, including battery placement, and a diagram showing the 110-degree detection angle and range up to 12 meters.

4.2. 일반 설치 지침

• The motion sensor is designed for indoor use only. Do not install outdoors.
• Avoid installing the sensor near heat sources (e.g., radiators, air conditioners, windows with direct sunlight) or in areas with strong air currents, as these can cause false alarms.
• 감지 영역에 장애물이 없는지 확인하십시오.
• The recommended installation height for the motion sensor is 1.8 to 2.2 meters (approximately 5.9 to 7.2 feet) from the floor.
• For wide-angle infrared detection, the sensor has a 110° detection angle and a range of 12 meters. It is typically installed in living rooms or areas requiring broad coverage.
• For vertical curtain infrared detection, the detection angle is about 15° with a detection distance of 8 meters. This is generally installed above doors and windows.

Figure 4.3: Motion Sensor Installation Diagram
This diagram illustrates the optimal installation height (1.8-2.2m) and the 110-degree detection angle for wide-angle coverage, and 15-degree for vertical curtain detection, typically above doors/windows.

Figure 4.4: Motion Sensor Detection Example
An illustration of the motion sensor's detection capabilities, showing how it covers a wide area and identifies movement.

4.3. Video Guide: Installation of Host and Accessories

4.4. 알람 호스트와의 페어링

The motion sensor must be paired with a compatible PGST alarm host to function. Refer to your specific PGST alarm host's user manual for detailed pairing instructions. Generally, this involves putting the alarm host into pairing mode and then triggering the motion sensor to register it with the system.

Figure 4.5: Wireless Signal Transmission
This image depicts how the motion sensor wirelessly communicates with the alarm host, which then sends notifications to your mobile phone.

5. 사용 설명서

Once installed and paired, the motion sensor operates automatically. When an intruder passes through its detection area, the sensor will automatically detect human activities and transmit wireless signals to the alarm host.

• 무장/해제: The motion sensor's detection status is controlled by the arming/disarming state of your PGST alarm host. Refer to your alarm host's manual for instructions on how to arm and disarm the system.
• 알람 알림: Upon detection of movement while the system is armed, the alarm host will trigger an alarm (siren, phone call, SMS, or app notification) based on your system's configuration.
• LED 표시등: The LED indicator on the sensor will briefly light up upon detection.

Figure 5.1: Wireless Infrared Detector Features in Action
This image highlights the key features of the detector, including its ability to detect human infrared and its intelligent analysis to prevent false positives.

Figure 5.2: Advanced Detection Technology
The sensor uses advanced signal processing to accurately detect human activity and transmit alerts.

6. 유지관리

• 배터리 교체: The sensor is powered by 2x AAA alkaline batteries. When the low voltage alert function is triggered, replace the batteries promptly to ensure continuous operation.
  

  그림 6.1: 배터리함
  The sensor uses two AAA batteries for power, designed for ultra-low power consumption.

• 청소: Gently wipe the sensor's detection window and body with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• 정기 테스트: It is recommended to test the motion sensor periodically (e.g., monthly) to ensure it is functioning correctly and communicating with the alarm host.

7. 문제 해결

8. 보증 및 지원

PGST is committed to providing high-quality security solutions. Our products are rigorously certified for quality and designed for reliable performance.

• 평생 기술 지원: PGST offers lifetime technical support for its products.
• 빠른 응답: Expect quick responses to your inquiries within 365 days.
• For any technical assistance or warranty claims, please contact PGST customer support through the official channels provided with your product or visit the PGST Store on Amazon.

Figure 8.1: PGST Support Commitment
PGST provides professional team support, lifetime technical assistance, and quick responses.