소개
This manual provides essential information for the safe and efficient use of your Tera EV Type 2 Wallbox 11kW 3-Phase Electric Vehicle Charging Station. Please read this manual thoroughly before installation and operation to ensure proper functionality and safety.
Image: The Tera EV Type 2 Wallbox charging station, featuring a sleek black design and integrated display.
The Tera EV charger is designed for electric vehicles (EVs) and plug-in hybrid electric vehicles (PHEVs), offering a maximum power output of 11 kW, 16A current, and 400V voltage. It complies with the European standard IEC 62196-2 and features advanced safety protections.
Image: The Tera EV charger in use, demonstrating its Type 2 and 3-phase CEE plug compatibility and plug-and-play operation.
Key features include a 7-meter charging cable, an integrated digital display for monitoring charging status, and an IP54 waterproof rating for outdoor use in various weather conditions. The pure copper charging cables ensure excellent conductivity and minimal heat generation.
Image: The Tera EV charger features a Type 2 connector and a CEE 3-phase plug, highlighting multiple safety protections.
설정 및 설치
Professional installation by a qualified electrician is recommended for this 3-phase EV charging station to ensure compliance with local electrical codes and safety standards.
패키지 내용:
Image: The package includes the EV charger unit, user manual, mounting plate, screw set, and a CEE 3-phase plug.
- EV Charger Type 2 Unit
- 사용자 설명서
- 장착 플레이트
- 나사 세트
- CEE 3-Phase Plug
- 케이블 홀더
장착 단계:
- 위치 선택: Choose a suitable wall location for the charging station, ensuring it is within reach of your vehicle's charging port and a compatible power source. The location should be protected from direct sunlight and heavy rain if possible, despite its IP54 rating.
- 드릴 구멍: Use the mounting plate as a template to mark and drill holes on the wall.
- 안전한 장착 플레이트: 제공된 나사와 앵커를 사용하여 장착 플레이트를 벽에 부착합니다.
- Mount Charger: Carefully place the EV charger unit onto the mounting plate.
- 안전한 충전기: Fasten the anti-theft screw (if applicable) to secure the charger to the mounting plate.
- 케이블 홀더를 설치하세요: Mount the cable holder near the charging station for convenient cable management.
Image: Visual guide for mounting the EV charger: drilling holes, attaching the mounting plate, securing the charger, and final assembly.
전기 연결: Connect the CEE 3-phase plug to a compatible 400V, 16A 3-phase power outlet. Ensure the electrical circuit is properly protected with a residual current device (RCD) and circuit breaker as per local regulations.
작동 지침
충전 시작:
- Ensure the charging station is properly connected to the power supply. The LED indicator on the unit should be lit.
- Take the Type 2 charging cable from the holder.
- Insert the Type 2 connector firmly into your electric vehicle's charging port.
- The charging process will begin automatically. The digital display will show charging progress, current power, and duration.
Image: The digital display provides real-time charging information, including energy delivered and charging speed.
기소 중지:
- Once charging is complete, or if you need to stop it prematurely, unlock your vehicle's charging port (if applicable).
- Remove the Type 2 connector from your vehicle.
- Return the charging cable to its holder on the wallbox.
상태 표시기 :
The LED indicators and digital display provide visual feedback on the charger's status:
- 솔리드 그린: Power on, no load (ready to charge).
- 녹색 깜박임: Plug inserted, not charging (waiting for vehicle to initiate).
- 솔리드 블루: 충전이 완료되었습니다.
- 파란색 깜박임: 충전 중입니다.
Image: Visual representation of the charger's status lights, indicating power, charging activity, and error states.
Adaptive Power Adjustment:
The charger features adaptive power adjustment to prevent overcharging and protect the vehicle's battery. The charging power may decrease as the battery approaches full capacity, ranging from 11 kW down to 1 kW, depending on the vehicle's requirements.
Image: The charger intelligently adjusts power output to optimize battery health and prevent overcharging.
충전 모드 :
The charger supports both three-phase and single-phase charging, adapting to the vehicle's capabilities.
Image: Comparison of three-phase and single-phase charging capabilities, showing how the charger adapts to different power inputs.
유지
- 정기 청소: 충전 스테이션 외부를 부드러운 천으로 닦으십시오.amp 천. 연마성 세척제나 용매를 사용하지 마십시오.
- 케이블 검사: Periodically inspect the charging cable and connectors for any signs of wear, damage, or corrosion. If any damage is found, discontinue use and contact customer support.
- 환경 보호: The unit is IP54 rated for water and dust resistance. Ensure the cover is properly closed when not in use to maintain this protection.
- 사용자가 수리할 수 없는 부품: The internal components of the charging station are not user-serviceable. Do not attempt to open or repair the unit yourself.
Image: The IP54 rating ensures the charger's durability and functionality in various weather conditions, requiring minimal external maintenance.
문제 해결
If you encounter issues, refer to the following common problems and their solutions. For persistent problems, contact customer support.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 충전기 전원이 켜지지 않습니다. | No power from the outlet, faulty connection. | Check the CEE 3-phase plug connection and the power supply. Ensure the circuit breaker is on. |
| 충전이 시작되지 않습니다. | Vehicle not ready, connector not fully inserted, or vehicle communication error. | Ensure the Type 2 connector is fully inserted. Check vehicle's charging settings. Re-plug the connector. |
| 느린 충전 속도. | Vehicle's battery management system limiting power, or external factors (e.g., grid load). | This may be normal due to adaptive power adjustment. Check vehicle's charging status. |
| Red LED indicator flashing. | Error detected (e.g., overcurrent, ground fault, overvoltag이자형). | Refer to the error code on the digital display or the manual's error indicator section. Disconnect and reconnect. If persistent, contact support. |
Error Indicators (Red LED Flashing):
- 1 플래시: Ground fault protection.
- 2번 깜박임: 과전류 보호.
- 3번 깜박임: Earth leakage (ungrounded).
- 4번 깜박임: 과소/과대tag전자 알람.
- 5번 깜박임: 릴레이 오류.
- 6번 깜박임: CP/CC fault.
If any red LED error occurs, disconnect the charger from the vehicle and power source, wait a few minutes, then reconnect. If the error persists, contact customer support.
기술 사양
| 특징 | 사양 |
|---|---|
| 모델 번호 | Q8-Schwarz |
| 상표 | 테라 |
| 커넥터 유형 | Type 2, CEE 16A 5-pin |
| 호환 장치 | Electric Vehicles (EVs) and Plug-in Hybrid Electric Vehicles (PHEVs) |
| 입력 Voltage | 400 볼트 |
| Amp에라 지 | 16아 |
| 전력 출력 | 11kW(XNUMXkW) |
| 출력 전류 | 16아 |
| 출력 볼륨tage | 400 볼트 |
| 주파수 범위 | 50Hz |
| 전원 | AC |
| 특징 | 케이블 홀더 |
| 색상 | 검은색 |
| 무게 | 4.6 킬로그램 |
| 침투 방지(IP) 등급 | IP54 |
| 작동 온도 | -30 °C ~ 50 °C |
| 인증 | CE, UKCA, RoHS |
호환성:
This charger is compatible with all Type 2 electric vehicles. Examp파일에는 다음이 포함되지만 이에 국한되지는 않습니다.
- Tesla (Model S, 3, X, Y)
- Volkswagen (e-Golf, ID4)
- Jeep (Grand Cherokee 4xe, Wrangler 4xe)
- Toyota (Prius Prime, RAV4 EV, C-HR EV)
- Honda (EV Plus, Clarity Electric)
- Fiat (500e, 500e 3+1)
- Hyundai (Ioniq Electric, Kona Electric, Santa Fe Hybrid)
- Nissan (LEAF, LEAF S, LEAF S PLUS, Altra EV)
- Chevrolet (EV1, Bolt Volt)
Image: The Type 2 connector ensures broad compatibility with a wide range of electric vehicle models.
보증 정보
Tera products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Tera web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
고객 지원
For technical assistance, troubleshooting, or warranty inquiries, please contact Tera customer support through the following channels:
- Web대지: Tera 공식 웹사이트를 방문하세요. web지원 자료 및 문의 양식을 위한 사이트입니다.
- 이메일: 제품 포장이나 공식 문서를 참조하세요. web고객 서비스 이메일 주소를 위한 사이트입니다.
- 핸드폰: 연락처는 공식 웹사이트에서 확인할 수 있습니다. web사이트나 제품 설명서에서 확인하세요.
When contacting support, please have your product model number (Q8-Schwarz) and proof of purchase readily available.