소개
The HPBS 5000A Portable Car Jump Starter with Air Compressor is a multi-functional device designed for automotive emergencies and maintenance. It combines a powerful jump starter, a tire inflator, a power bank, and an LED flashlight into one compact unit, providing essential tools for vehicle owners.
Image: The HPBS 5000A Portable Car Jump Starter, showcasing its compact design and integrated components like the LCD display, control buttons, and jumper cable ports.
상자 안에 무엇이 들어있나요?
Your HPBS Jump Starter package includes the following items:
- HPBS Jump Starter (x1)
- Smart Jumper Cables (x1)
- USB Charging Cable (without adapter) (x1)
- Trachea (air hose) (x1)
- Gas Nozzles (x3)
- EVA Storage Case (x1)
- 사용 설명서(x1)
Image: All components included in the HPBS Jump Starter package, neatly arranged within and around its protective EVA storage case.
주요 특징
- 5000A Peak Jump Starting Power: Capable of jump-starting 12V vehicles (up to 10.0L gas or 8.0L diesel engines) in 1-2 seconds, up to 35 times on a full charge.
- Intelligent 150 PSI Tire Inflation: Features tire pressure monitoring, preset value stop, and unit switching (BAR/PSI/KPA). Inflates a 225/60 R18 car tire in approximately 8 minutes.
- Powerful Mobile Power Bank: Equipped with USB outputs (5V/3A, 9V/2A, 12V/1.5A) and a Type-C input (5V/2A, 9V/2A) to charge various electronic devices.
- LCD 디스플레이: Provides clear real-time data including battery level, inflator mode, and tire pressure.
- 다기능 LED 손전등: Includes flashlight, SOS, and strobe modes for illumination in dark or emergency situations.
- 다중 안전 보호: Incorporates 10 built-in safety technologies (over-charge, over-current, short-circuit, reverse-polarity, low-temp, high-temp, over-voltage, over-load, spark-proof, reverse-charge) with advanced intelligent clamps.
설정
Before first use, ensure the jump starter is fully charged. Connect the provided USB charging cable to the Type-C input port on the device and a suitable USB power adapter (not included). The LCD display will indicate the charging status. Once fully charged, disconnect the cable.
Image: The HPBS Jump Starter connected via USB-C, demonstrating its power bank functionality for charging mobile devices.
작동 지침
1. 차량 점프 스타트
- Ensure the jump starter is sufficiently charged.
- Insert the smart jumper cable plug firmly into the jump starter's output port.
- 연결하다 빨간색 (+) 클amp 차량 배터리의 양극(+) 단자에 연결합니다.
- 연결하다 검은색 (-) 클amp 차량 배터리의 음극(-) 단자에 연결합니다.
- 자동차 엔진을 시동하세요.
- Once the engine starts, immediately remove the jumper cables from the car battery, then disconnect the cables from the jump starter.
Image: A visual guide illustrating the three steps for jump-starting a vehicle: connecting the jump starter, attaching the clamps to the car battery, and starting the engine.
2. 타이어 공기압
- Take out the air pipe (trachea) and connect it to the inflator interface on the jump starter. Tighten it securely.
- 전원 버튼을 길게 눌러 기기를 켜세요.
- Connect the air pipe to the tire valve. The LCD display will show the current tire pressure.
- Short press the mode switch button to select the desired inflation mode (e.g., car, motorcycle, bicycle, ball).
- Use the "+" and "-" keys to adjust the preset air pressure value.
- Press the power/inflation start button to begin inflation. The device will automatically stop when the preset pressure is reached.
- During inflation, you can short press the power button or inflation mode button to stop inflation manually.
Image: The HPBS Jump Starter connected to a car tire, demonstrating its tire inflation capability with the digital display showing pressure readings.
3. 파워뱅크 기능
To use the device as a power bank, simply connect your electronic device (e.g., smartphone, tablet) to the USB output port using a compatible USB cable. The jump starter will automatically begin charging your device.
4. LED 손전등
Press the lighting button to cycle through the flashlight modes: constant on, SOS signal, and strobe. Press again to turn off the light.
유지
- Store the jump starter in its EVA storage case in a cool, dry place when not in use.
- 배터리 수명 유지를 위해 사용하지 않더라도 3~6개월에 한 번씩 기기를 충전하십시오.
- 부드럽고 마른 천으로 외부를 닦으세요. 강한 화학 물질이나 연마성 세제는 사용하지 마세요.
- Inspect jumper cables and air hose for any damage before each use.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 장치가 켜지지 않습니다. | 배터리가 소진되었습니다. | 점프 스타터를 완전히 충전하세요. |
| 차량 점프 스타트가 불가능합니다. | Incorrect cable connection; battery too low; engine size exceeds capacity. | Ensure correct polarity (+ to +, - to -). Check jump starter battery level. Verify vehicle engine size is within specified limits (10.0L gas / 8.0L diesel). |
| Tire inflator not working or inaccurate reading. | Air hose not securely connected; valve stem issue. | Ensure air hose is tightly screwed onto both the device and the tire valve. Check tire valve for damage. |
| 장치가 과열되었습니다. | Prolonged use or high ambient temperature. | Allow the device to cool down before further use. Avoid direct sunlight during operation. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | HPBS |
| 모델 | H2500 |
| 피크 출력 전류 | 5000 Amps |
| 엔진 호환성 | 가솔린 최대 10.0L, 디젤 최대 8.0L |
| 타이어 팽창기 압력 | 150 PSI (최대) |
| Power Bank Input (Type-C) | 5V/2A, 9V/2A |
| Power Bank Output (USB) | 5V/3A, 9V/2A, 12V/1.5A |
| 치수(D x W x H) | 8.07인치 x 3.54인치 x 1.57인치 |
| 품목 무게 | 1.4 파운드 |
| 배터리 유형 | 리튬폴리머(포함) |
Image: A detailed diagram highlighting the various ports and controls on the HPBS Jump Starter, including the LED lighting, USB output, Type-C input, inflator interface, and display screen.
보증 및 지원
HPBS stands behind the quality of its products. This jump starter comes with a 2-year product quality assurance. For any questions or assistance, please do not hesitate to contact HPBS customer service, available 연중무휴, 하루 7시간.
Contact information can typically be found in the included user manual or on the official HPBS web대지.