홈컴 831-338V00AK

HOMCOM Floating Bedside Tables (Set of 2) Instruction Manual

모델: 831-338V00AK

소개

구매해주셔서 감사합니다asing the HOMCOM Set of 2 Floating Bedside Tables. These wall-mounted tables are designed to provide convenient storage and a modern aesthetic to your bedroom or living space. This manual provides essential information for safe assembly, proper use, and maintenance of your new furniture. Please read these instructions carefully before assembly and retain them for future reference.

Two HOMCOM floating bedside tables installed on a wall next to a bed, each featuring a drawer and an open shelf, with decorative items on top.

Image: HOMCOM Floating Bedside Tables in a bedroom setting.

중요한 안전 정보

  • Always assemble according to the instructions provided. Incorrect assembly can lead to instability and potential injury.
  • 최대 중량 한도를 초과하지 마십시오. 8kg(17.6파운드) per table. Overloading can cause the table to detach from the wall or break.
  • Ensure the tables are securely mounted to a sturdy wall structure (e.g., wall studs) to prevent tipping or collapse. Use appropriate wall anchors for your wall type.
  • 조립 중에는 어린이의 손이 닿지 않는 곳에 작은 부품과 포장재를 보관하여 질식 위험을 방지하세요.
  • Regularly check all fasteners to ensure they remain tight. Re-tighten as necessary.
  • 보호 장치 없이 뜨거운 물건을 표면에 직접 올려놓지 마십시오.

패키지 내용

조립을 시작하기 전에 아래 나열된 모든 구성품이 포함되어 있고 손상되지 않았는지 확인하세요. 부품이 누락되었거나 손상된 경우 고객 지원 센터에 문의하세요.

  • 2 x Floating Bedside Tables (unassembled components)
  • 2 x Drawers (unassembled components for each table)
  • 1 x 하드웨어 팩(나사, 벽 앵커 등)
  • 1 x 사용 설명서

제품 사양

특징세부 사항
상표홈컴
모델 번호831-338V00AK
Total Dimensions (each unit)35 cm (L) x 32 cm (W) x 22.5 cm (H) / 13.78" (L) x 12.6" (W) x 8.86" (H)
Drawer Internal Dimensions26.5cm (L) x 23.5cm (W) x 6cm (H)
선반 치수35cm (L) x 30.5cm (W) x 9cm (H)
Maximum Supported Weight (each)8kg(17.6파운드)
재료목재 멜라민
색상Oak and White
서랍 수1 per table (total 2)
Diagram showing the dimensions of the HOMCOM floating bedside table, including length, width, height, and drawer dimensions.

Image: Detailed dimensions of one floating bedside table unit.

설치 및 조립 지침

Assembly is required for these floating bedside tables. Please follow these steps carefully. It is recommended to have two people for wall mounting.

필요한 도구 (포함되지 않음):

  • Phillips 헤드 스크루 드라이버
  • 송곳
  • 드릴 비트 (벽면 앵커에 적합)
  • 수준
  • 줄자
  • 연필
  • Stud Finder (recommended for secure mounting)

조립 단계:

  1. 부품 풀기 및 식별: Carefully unpack all components and hardware. Refer to the included parts list to ensure everything is present.
  2. 서랍 조립: Follow the specific instructions provided in the hardware pack to assemble the drawer unit for each table. Ensure all cam locks and screws are tightened securely.
  3. 테이블 프레임 조립: Connect the main panels of the bedside table using the provided screws and dowels. Pay attention to the orientation of the panels to ensure the open shelf and drawer slot are correctly positioned.
  4. 서랍을 삽입하세요: Once the table frame is assembled, slide the assembled drawer into its designated slot. Test the drawer's smooth operation.
  5. 장착 위치 선택: Select a suitable wall location. Use a stud finder to locate wall studs for the most secure mounting. If mounting into drywall without studs, use appropriate heavy-duty drywall anchors (not always included, may need to be purchased separately).
  6. 드릴링 지점 표시: Hold the assembled bedside table against the wall at the desired height. Use a level to ensure it is straight. Mark the drilling points for the mounting brackets/screws with a pencil.
  7. 드릴 파일럿 홀: Drill pilot holes at the marked points. The size of the drill bit should match the wall anchors or screws being used.
  8. Install Wall Anchors (if needed): If not drilling into studs, insert the appropriate wall anchors into the pilot holes.
  9. Mount the Table: Align the mounting holes on the back of the bedside table with the drilled holes/anchors. Securely fasten the table to the wall using the provided screws. Ensure it is firmly attached and does not wobble. Repeat for the second table.
A HOMCOM floating bedside table mounted on a wall next to a bed, showing its compact design and how it saves floor space.

이미지: 전ample of a floating bedside table installed, highlighting its space-saving design.

A close-up of the HOMCOM floating bedside table showing the top surface, open shelf, and a drawer, with labels pointing to each storage area.

이미지: 상세 view of the table's storage compartments: countertop, open shelf, and drawer.

작동 및 사용

Your HOMCOM floating bedside tables are designed for convenient storage and display in various indoor settings.

  • 저장: Utilize the top surface for items like lamps, alarm clocks, or decorative pieces. The open shelf is suitable for books, magazines, or small electronic devices. The drawer provides concealed storage for personal belongings.
  • 놓기: These tables are ideal for bedrooms as nightstands, but can also be used in living rooms as small side tables or even in hallways for keys and mail. Their floating design allows for easy floor cleaning underneath.
  • 중량 제한: Always adhere to the maximum weight capacity of 8 kg (17.6 lbs) per table to ensure stability and longevity.
A HOMCOM floating bedside table mounted on a wall next to a sofa, with a robot vacuum cleaner operating underneath, demonstrating the ease of floor cleaning.

Image: The floating design allows for easy cleaning underneath, as shown with a robot vacuum.

관리 및 유지 보수

  • 청소: 광고로 지우기amp cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the laminated finish.
  • 유출: 얼룩이나 목재 멜라민 손상을 방지하기 위해 유출된 부분을 즉시 청소하세요.
  • 패스너: Periodically check all screws and wall mounts to ensure they are tight. Re-tighten as needed to maintain stability.
  • 환경: 직사광선이나 과도한 습기에 장시간 노출되면 변형이나 변색이 발생할 수 있으므로 피하십시오.

문제 해결

문제가능한 원인해결책
Table feels wobbly or unstable after mounting.Loose mounting screws or inadequate wall anchors.Ensure all mounting screws are fully tightened. Verify that appropriate wall anchors were used for your wall type and are securely installed. If necessary, re-mount using stronger anchors or by drilling into wall studs.
서랍이 부드럽게 미끄러지지 않습니다.서랍 레일이 정렬되지 않았거나 막혀 있습니다.Remove the drawer and check the runners for any obstructions or damage. Ensure the drawer was assembled correctly and the runners are aligned properly within the table frame.
패널 사이에 눈에 띄는 틈이 있습니다.Panels not fully joined during assembly.Check all cam locks and screws. Disassemble and reassemble the affected section, ensuring all connections are tight and panels are flush.

보증 및 고객 지원

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact HOMCOM customer support:

  • Web대지: www.aosom.com (HOMCOM is a brand of Aosom)
  • 연락처 정보: Please refer to the contact section on the Aosom website for the most up-to-date phone numbers or email addresses for your region.

© 2026 HOMCOM. 모든 권리 보유.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.