Feit Electric SL50-36/RGB/AG 50FT Smart RGBIC Permanent Outdoor String Lights User Manual

중요한 안전 정보

본 제품을 설치 또는 작동하기 전에 모든 안전 지침을 읽고 숙지하십시오. 이 지침을 따르지 않을 경우 감전, 화재 또는 기타 위험이 발생할 수 있습니다.

• 설치 또는 유지 관리 전에 전원 공급 장치가 분리되어 있는지 확인하십시오.
• This product is designed for outdoor use and is rated IP65/IP67 for weather resistance. However, avoid submerging the lights in water.
• Operate only with a 120 Volt AC power supply. The total wattage for this 50FT string light is 72 Watts.
• 제품을 직접 수리하거나 개조하지 마십시오. 자격을 갖춘 전문가에게 서비스를 의뢰하십시오.
• 가연성 물질에서 멀리 두세요.

패키지 내용

설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.

• 1 x 50FT Smart RGBIC Permanent Outdoor String Light (Model: SL50-36/RGB/AG)
• 장착 나사 및 앵커
• 3M VHB Adhesive Pads (pre-attached to light pods)
• Power Adapter and Controller

Image: Package contents including the 50FT string light, power adapter, controller, and mounting hardware.

설정 및 설치

1. 설치 계획

Before installation, plan the layout of your lights. The 50-foot string light is designed to be installed under eaves or along other outdoor surfaces. Ensure the power outlet is within reach of the power adapter cable.

Image: Lights installed discreetly under the eaves of a house, showing the "Hidden within the Eaves" concept.

2. 조명 설치

The lights can be mounted using either the pre-attached 3M VHB adhesive or screws for a more permanent fixture.

1. 표면 준비: Clean the mounting surface thoroughly with a cloth or tissue to ensure it is free of dust, dirt, and moisture. This is crucial for optimal adhesive performance.
2. 놓기: Install the string lights approximately 1.91 to 3.94 inches away from the wall surface to allow for optimal light dispersion.
3. 접착제 설치:
   • Tear off the VHB adhesive backing from the back of each light pod.
   • Press each light pod firmly against the prepared surface for at least 5 seconds to ensure a strong bond.
4. 나사 설치: For added security or on surfaces where adhesive may not hold, use the provided screws. Each light pod has a built-in hole for screw mounting.
   • Attach 4 screw clips to each string light to keep them secure.
   • Drill pilot holes if necessary and secure the light pods using the provided screws and anchors.

Image: Detailed installation steps showing surface cleaning, adhesive removal, firm pressing, and screw attachment.

3. Connecting Multiple Strands (Optional)

If you wish to extend your lighting display, additional 16-foot extension strands (sold separately) can be connected. Ensure the total length does not exceed the maximum recommended for your power supply.

• Connect two string lights via the waterproof connectors.
• Firmly screw the cap of the last string light section to ensure a secure, weatherproof seal.

Image: Illustration demonstrating the connection of an extension light strand to the main unit.

4. 전원 연결

Plug the power adapter into a standard 120V outdoor-rated electrical outlet. Ensure the connection is secure and protected from moisture.

작동 지침

1. 초기 전원 켜기

Once connected to power, the lights will illuminate in a default mode. You can use the physical switch on the power cord for basic On/Off control.

2. Feit Electric App Setup

To unlock the full range of features, download the Feit Electric app on your smartphone or tablet.

1. Download the "Feit Electric" app from your device's app store.
2. 계정을 만들거나 로그인하세요.
3. Ensure your smartphone is connected to a 2.4GHz Wi-Fi network. The lights only support 2.4GHz Wi-Fi.
4. Follow the in-app instructions to add your new string lights. This typically involves putting the lights into pairing mode (refer to app for specific steps).

Image: The Feit Electric app interface showing color selection and light control options.

3. 앱 기능

• 색상 제어: Select from millions of colors using the RGBIC technology.
• 사전 설정 장면: Choose from 8 built-in scenes or over 75 additional scenes available in the app for various occasions and moods.
• 사용자 정의: Control individual light pods or group specific areas of your lighting display for unique patterns and sequences. Note: Individual light control may operate in groups of three LEDs.
• 일정: Set schedules for your lights to turn On/Off automatically at specific times or days.
• 카운트 다운 타이머: Utilize the countdown timer feature for temporary lighting effects.

Image: The Feit Electric app showing options for scheduling and setting a countdown timer for the lights.

Image: The Feit Electric app displaying options to group and control different sections of the permanent lights.

4. 음성 제어 통합

The Feit Electric Smart RGBIC Permanent Outdoor String Lights are compatible with Amazon Alexa and Google Assistant.

1. Ensure your lights are successfully paired with the Feit Electric app.
2. Alexa 또는 Google Home 앱을 여세요.
3. Follow the instructions within the voice assistant app to link your Feit Electric account.
4. 연결되면 다음과 같은 음성 명령을 사용할 수 있습니다.
   • "Alexa, turn on outdoor lights."
   • "Hey Google, set outdoor lights to red."
   • "알렉사, 실외 조명을 50%로 낮춰줘."

Image: An Amazon Echo Dot, illustrating the product's compatibility with Alexa and Google Assistant for voice control.

유지

• 청소: Periodically wipe the light pods and wiring with a soft, damp 먼지와 이물질을 제거할 수 있는 천을 사용하십시오. 청소하기 전에 전원을 차단하십시오.
• 내후성: The lights are IP65/IP67 rated for outdoor use, designed to withstand rain and various weather conditions. Regularly inspect connections for any signs of wear or damage to maintain weatherproofing.
• 수명: These LED lights have an estimated lifespan of 25,000 hours, requiring minimal replacement.

Image: A house facade lit with vibrant colors from the permanent outdoor lights, demonstrating their aesthetic appeal and year-round use.

문제 해결

명세서

Image: A graphic displaying key specifications of the permanent light system.

보증 및 지원

This Feit Electric product comes with a 2년 보증 구매일로부터. 이 보증은 정상적인 사용 하에서 재료 및 제조상의 결함을 포함합니다.

For technical support, warranty claims, or further assistance, please visit the official Feit Electric web사이트 또는 고객 서비스 부서에 문의하세요. 연락처 정보는 일반적으로 제품 포장이나 제조업체의 web대지.

보증을 위해 구매 증빙서류를 보관하세요.