Flame King FK-SSPT-18IN-FLAREX2
Flame King FK-SSPT-18IN-FLAREX2 Propane Pigtail Hose Instruction Manual
Model: FK-SSPT-18IN-FLAREX2
소개
This manual provides essential information for the safe and correct installation and use of your Flame King FK-SSPT-18IN-FLAREX2 18-inch Stainless Steel Braided Propane Pigtail Hoses. These hoses are designed to connect a propane cylinder to an RV or trailer propane regulator. Please read all instructions carefully before installation and operation.
중요한 안전 정보
- 프로판을 다룰 때는 항상 적절한 환기를 확보하십시오.
- Check all connections for leaks using a soapy water solution after installation and before each use. Bubbles indicate a leak.
- Do not use open flames to check for leaks.
- These hoses include safety features such as thermal protection in case of fire and excess flow protection in case of a broken gas line.
- Ensure all propane cylinder valves are closed before connecting or disconnecting hoses.
- Keep hoses away from sharp objects, hot surfaces, and moving parts.
- Replace hoses if any signs of wear, damage, or cracking are observed.
- Only use these hoses for their intended purpose: connecting propane cylinders to RV or trailer regulators.
제품 특징
- 길이: Each hose measures 18 inches.
- 압력 등급: Rated for 80,000 BTUs per hour; maximum 250 PSI.
- 사이: ACME (Type 1/QCC) nut for propane tank connection and 1/4" inverted male flare for regulator connection.
- 재료: Durable stainless steel braided hose with rustproof brass connectors.
- 호환성: Suitable for 5lb-40lb refillable propane tanks.
- 안전: Equipped with thermal and excess flow protection.

Image: Two 18-inch stainless steel braided propane pigtail hoses, highlighting their durable construction and CSA approval.
설정 및 설치
Follow these steps to safely connect your Flame King propane pigtail hoses:
- Ensure Propane Supply is Off: Before beginning, confirm that the valve on your propane cylinder(s) is fully closed.
- 연결 식별:
- The larger black ACME nut connects to the propane tank (QCC/Type1).
- The smaller brass 1/4" inverted male flare connects to your RV or trailer's dual-stag전자 레귤레이터.

이미지: 상세 view of the rustproof brass connectors, indicating the QCC/Type1 connection for propane tanks and the 1/4" inverted male flare for regulators.
- 프로판 탱크에 연결하세요: Hand-tighten the ACME nut onto the propane cylinder valve. Ensure a snug fit.
- Connect to Regulator: Connect the 1/4" inverted male flare end to the corresponding port on your RV's dual-stage regulator. Use a wrench to tighten this connection securely, but do not overtighten.

Image: Illustration of connecting the pigtail hose to an auto-changeover two-stage regulator, detailing thread dimensions.
- Verify Thread Type: It is crucial to ensure your regulator has an inverted flare connection. These hoses are not compatible with Male NPT connections.

Image: Visual guide distinguishing between Inverted Flare (correct for this hose) and Male NPT (incorrect) thread types.
- 누출 테스트: After all connections are made, slowly open the propane cylinder valve. Apply a soapy water solution to all connections. If bubbles appear, close the propane valve immediately, tighten the connection, and re-test. Repeat until no bubbles are present.
작동 지침
Once the hoses are securely installed and leak-tested:
- Slowly open the propane cylinder valve(s) completely.
- The regulator will now receive propane gas. You can proceed to operate your RV's propane appliances as usual.
- When not in use for extended periods, it is recommended to close the propane cylinder valve(s).
유지
- 정기 검사: Periodically inspect the hoses for any signs of wear, cuts, abrasions, kinks, or damage. Check the brass connectors for corrosion.
- 누출 점검: Perform a leak test with soapy water solution at the beginning of each season or after any disconnection/reconnection.
- 청소: Clean the hoses with mild soap and water if necessary. Avoid harsh chemicals that could degrade the materials.
- 저장: When not connected, store the hoses in a clean, dry place away from direct sunlight and extreme temperatures.
- 대사: Replace hoses immediately if any damage is found or if they are past their recommended service life (typically 5-10 years, depending on usage and environmental factors).
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Gas leak detected (bubbles during soapy water test) | Loose connection; damaged hose or fitting. | Close propane valve. Tighten connections. If leak persists, replace the hose. |
| No gas flow to appliances | Propane tank valve closed; excess flow device activated; empty tank; regulator issue. | Ensure tank valve is fully open. Disconnect and reconnect hose to reset excess flow device. Check tank level. Consult RV manual for regulator troubleshooting. |
| Hose appears damaged or worn | 일반적인 마모 및 손상; 가혹한 환경 노출. | Immediately replace the hose. Do not attempt to repair. |
| Incorrect thread type for connection | Attempting to connect to Male NPT instead of Inverted Flare. | Ensure your regulator has an Inverted Flare connection. These hoses are not compatible with Male NPT. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | FK-SSPT-18IN-FLAREX2 |
| 상표 | 화염왕 |
| 재료 | 황동, 스테인레스 |
| 색상 | Silver (Hose), Black (ACME Nut), Brass (Fittings) |
| 제품 크기 (개당) | 18인치 길이 x 0.75인치 너비 |
| 품목 무게(개당) | 약 0.79파운드(12.6온스) |
| 최대 압력 | 250파운드 |
| BTU 등급 | 시간당 80,000 BTU |
| 사이 | ACME (Type 1/QCC) nut x 1/4" Inverted Male Flare |
| 한국어: | 850034692708 |
보증 및 지원
Specific warranty information for the Flame King FK-SSPT-18IN-FLAREX2 propane pigtail hoses is not provided within this manual. For warranty details, product support, or to contact customer service, please refer to the product packaging or visit the official Flame King web사이트. 소매점에 문의하여 도움을 받으실 수도 있습니다.
Flame King Official Web대지: www.flameking.com
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.