Alfred DB2S Smart RFID Deadbolt Lock User Manual

1. 서론

The Alfred DB2S Smart RFID Deadbolt Lock offers advanced security and convenient access for your home. This lock features multiple entry methods including PIN code, RFID card, traditional key override, and control via the Alfred Home App. Designed for ease of use and installation, it integrates modern technology to enhance your home security experience.

2. 안전 정보

• 설치 및 사용 전에 모든 지침을 주의 깊게 읽으십시오.
• 잠금 장치를 분해하거나 개조하지 마십시오. 이는 보증을 무효화하고 보안을 손상시킬 수 있습니다.
• Keep traditional keys in a safe, accessible location outside the home for emergency access.
• Ensure all PIN codes and fingerprints are securely managed and not shared with unauthorized individuals.
• Regularly check battery levels and replace/recharge as indicated to prevent unexpected lockouts.

3. 설정 및 설치

The Alfred DB2S is designed for DIY-friendly installation. A fully digital installation process is available via the BILT app for step-by-step guidance.

3.1. 패키지 내용

설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.

• Exterior Assembly (Touchscreen Keypad)
• Interior Assembly (Thumb Turn & Battery Compartment)
• 래치 볼트
• 장착 플레이트
• 스트라이크 플레이트
• 기계식 키(2)
• 무선 주파수 식별(RFID) Tags (2)
• 충전식 리튬 이온 배터리 팩
• Installation Hardware (Screws, etc.)
• 사용 설명서 (본 문서)

3.2. 도어 준비

Verify your door dimensions meet the requirements for installation. The lock is compatible with standard door preparations.

3.3. Installing the Latch Bolt

Insert the latch bolt into the door edge. Ensure the latch bolt face is flush with the door edge and the slotted hole is centered. Secure it with the provided screws.

3.4. Installing Exterior and Interior Assemblies

Route the cable from the exterior assembly through the door hole and connect it to the interior assembly. Secure both assemblies to the door using the mounting plate and screws. Ensure the tailpiece is horizontal and the thumb turn is vertical for proper operation.

영상: The exterior keypad assembly and the interior thumb turn assembly of the Alfred DB2S Smart RFID Deadbolt Lock.

3.5. 배터리 설치 및 활성화

Install the rechargeable lithium-ion battery pack into the interior assembly. The lock will activate upon battery insertion. Follow the instructions in the Alfred Home App to complete the initial setup and calibration.

4. 잠금 장치 작동

4.1. 잠금 해제 방법

• PIN 코드: Enter your programmed PIN code on the illuminated touchscreen keypad.
• RFID 카드: Present a registered RFID card to the built-in RFID reader.
• 키 재정의: Use the traditional mechanical key as a backup.
• Alfred Home App: Use the Bluetooth connection on your mobile device via the Alfred Home App to unlock.
• Remote Unlock (with Alfred Connect WIFI bridge, sold separately): Control your lock remotely via the Alfred Home App.

4.2. 잠금 방법

• 수동 잠금: Rotate the thumb turn on the interior assembly.
• 원터치 잠금: Press and hold any key on the touchscreen for 2 seconds, or press the checkmark button once without entering a code.
• 자동 재 잠금 : The lock features an adjustable auto re-lock timer (30 sec, 1 min, 2 min, 3 min) which automatically locks the deadbolt after a set period.
• Alfred Home App: Use the Bluetooth connection on your mobile device via the Alfred Home App to lock.
• Remote Lock (with Alfred Connect WIFI bridge, sold separately): Control your lock remotely via the Alfred Home App.

4.3. 고급 기능

• Door Position Sensors: These sensors detect when your door is physically open, preventing auto-locking if the door is not fully closed.
• 개인정보 보호 모드: Activate Privacy Mode from the interior to disable all external access methods except the master code and mechanical key.
• 외출 모드 : When activated, an alarm will sound if the lock is accessed via mechanical key or thumb turn, and user PIN codes/fingerprints will be disabled. Only the master PIN code or app can disable Away Mode.
• 음성 제어: With the Alfred Connect WIFI bridge (sold separately), the lock is compatible with Hey Google and Alexa for voice commands.

5. 유지관리

5.1. 배터리 관리

The lock features a built-in low battery warning on both the touchscreen and within the Alfred Home App. When battery levels are low, recharge the lithium-ion battery pack. In case of complete battery failure, the lock can be temporarily powered via a USB-C port on the bottom of the outside panel for emergency access to change the battery pack.

영상: The exterior keypad of the Alfred DB2S Smart Lock, showing the illuminated touchscreen and the discreet keyhole cover.

5.2. 청소

터치스크린과 잠금 본체를 부드러운 천으로 닦으십시오.amp 천으로 닦으세요. 마감재나 전자 부품을 손상시킬 수 있는 연마성 세척제나 용제는 사용하지 마세요.

6. 문제 해결

• 잠금이 응답하지 않습니다. Check battery levels. Use the USB-C emergency power port if needed.
• 앱 연결 문제: Ensure Bluetooth is enabled on your device. If using the Wi-Fi bridge, verify its connection and proximity to the lock.
• Keypad unresponsive in cold weather: Ensure the keypad is dry and free of ice. Repeated presses may be necessary in extreme cold.
• 자동 잠금 기능이 작동하지 않음: Check door position sensors to ensure the door is fully closed and aligned.
• PIN code/RFID card not working: Verify the code/card is correctly programmed in the Alfred Home App.

7. 사양

8. 보증 및 지원

8.1. 제조업체 보증

The Alfred DB2S Smart RFID Deadbolt Lock is covered by a 1년 제조사 보증 구매일로부터. 보증 청구를 위해 구매 증빙을 보관하세요.

8.2. 고객 지원

For further assistance, troubleshooting, or warranty inquiries, please refer to the Alfred Home App or visit the official Alfred web지원 리소스 사이트.