NEEBRC 7-Channel RC Transmitter and Receiver with 12-LED Light Set User Manual

1. 소개 및 이상view

This manual provides detailed instructions for the operation, setup, and maintenance of your NEEBRC 7-Channel RC Transmitter (NB-7D) and its accompanying Receiver with built-in Light Control System and 12-LED Light Set. This 2.4GHz radio remote control system is designed for a wide range of RC models, including cars, crawlers, trucks, buggies, off-road and on-road vehicles, boats, and tanks. It features 2.4GHz FHSS transmission for interference-free operation, proportional trigger limit setting for beginners, multi-channel mixing control, and a low voltage indication system.

Figure 1.1: NEEBRC 7-Channel RC Transmitter, Receiver, and 12-LED Light Set components.

2. 상자 안에 무엇이 들어있나요?

패키지를 열면 다음 구성품이 모두 포함되어 있는지 확인하세요.

• 1 x 7CH Transmitter (NB-7D)
• 1 x Receiver Built-in Light Control System (RX-G7X)
• 1 x 12LED Light Set (5MM Lamp Bead Diameter)

Figure 2.1: Packaging and included components.

3. 제품 특징

The NEEBRC NB-7D system is equipped with several advanced features to enhance your RC experience:

• 2.4GHz FHSS Transmission: Enables simultaneous operation of multiple vehicles without signal interference.
• Proportional Trigger Limit Setting: Allows beginners to practice with controlled throttle limits.
• High Performance Receiver: The RX-G7X receiver features high-voltage protection and strong signal capability, compatible with high voltage servos (4.2V-10V).
• Multi-Channel Mixing Control: Bind multiple receiver channels to a single transmitter channel for complex operations.
• Integrated Light and Winch Slots: The receiver includes dedicated slots for easy remote control of LED lights and winches on your RC model.
• 배터리 부족tage 표시: An LED on the transmitter flashes slowly when battery voltage drops below 4.2V, preventing unexpected power loss.
• 12-LED Light Set: Realistic smart simulation lights (5mm diameter) for various scene effects.

Figure 3.1: Key features of the NB-7D Transmitter, including anti-slip foam, anti-slip trigger, 4xAA battery compartment, unique control key layout, lanyard hole, and ergonomic grip.

Figure 3.2: The RX-G7X Light Group Receiver, highlighting its support for high voltage servos and multifunctional light/winch slots.

그림 3.3: 클로즈업 view of the transmitter's control key layout.

Figure 3.4: Detail of the anti-slip trigger for precise control.

Figure 3.5: Detail of the anti-slip foam on the steering wheel for improved grip.

Figure 3.6: The RX-G7X receiver supports high voltage servos, operating voltage 4.2V에서 10V로.

4. 설정 가이드

4.1. 송신기 배터리 설치

The NB-7D transmitter requires 4x AA batteries (not included). To install:

1. Locate the battery compartment on the base of the transmitter.
2. 배터리 덮개를 밀어서 엽니다.
3. AA 배터리 4개를 올바른 극성(+/-)에 맞춰 넣으세요.
4. 배터리 덮개를 단단히 닫으세요.

4.2. Receiver and Component Connection

Connect your RC model's components to the RX-G7X receiver as follows. Refer to Figure 4.1 for port identification:

• 채널 1(CH1): 스티어링 서보
• 채널 2(CH2): Electronic Speed Controller (ESC) / Throttle
• 채널 3-7 (CH3-CH7): Auxiliary functions (e.g., additional servos, gear shifts).
• Light Slots (HL, PL, BL, RL, CLR, CLL): Connect the 12-LED light set or other compatible LED lights.
• Winch Slot (M1): Connect your RC winch.

Figure 4.1: Transmitter controls and Receiver port assignments.

4.3. 송신기와 수신기 결합

송신기와 수신기 간의 통신을 설정하려면:

1. 송신기의 전원이 꺼져 있는지 확인하세요.
2. Connect the receiver to power (e.g., via ESC or a separate battery). The receiver's LED will flash rapidly.
3. Press and hold the "BIND" button on the receiver (refer to Figure 4.2).
4. BIND 버튼을 누른 상태에서 송신기를 켭니다.
5. The receiver's LED should turn solid, indicating a successful bind. Release the BIND button.
6. Turn off both the transmitter and receiver, then turn them back on in sequence (transmitter first, then receiver) to confirm the bind.

Figure 4.2: Location of the BIND button on the RX-G7X receiver.

5. 사용 설명서

5.1. 기본 제어

• 스티어링 휠(CH1): Rotate left or right to control the steering of your RC model.
• 스로틀 트리거(CH2): 당기면 앞으로 가속하고, 밀면 브레이크 또는 후진합니다.
• 전원 스위치: Located on the front of the transmitter, turns the unit on/off.

5.2. Advanced Control Functions

The NB-7D transmitter offers several adjustable settings for fine-tuning control:

• ST.TRIM(스티어링 트림): Adjusts the neutral position of the steering. Use if the vehicle pulls to one side when the steering wheel is centered.
• TH.TRIM(스로틀 트림): Adjusts the neutral position of the throttle. Use if the vehicle moves slightly forward or backward when the throttle trigger is at neutral.
• ST D/R (Steering Dual Rate): Adjusts the maximum steering angle. Lowering this value reduces the steering sensitivity, useful for high-speed driving.
• TH D/R (Throttle Dual Rate): Adjusts the maximum throttle output. Lowering this value reduces the maximum speed, useful for beginners or confined spaces.
• Steering Reverse Switch (ST.REV): 조향 방향을 반대로 합니다.
• 스로틀 역회전(TH.REV): 스로틀 방향을 반대로 합니다.
• CH5, CH6, CH7 Knobs: Control auxiliary channels 5, 6, and 7 respectively. These can be assigned to various functions on your RC model.
• MIX/LED Button: Toggles between General Mode and Mixed Mode, and also controls the LED light system.
• 설정 버튼: Used for various settings and programming functions.

5.3. Light Control System

The integrated light control system allows for realistic lighting effects:

• Connect the 12-LED light set to the corresponding light slots on the RX-G7X receiver (HL: Headlights, PL: Park lights, BL: Backup lights, RL: Right Cornering Light, CLR: Clear, CLL: Clear).
• Use the MIX/LED button on the transmitter to cycle through different light modes or turn lights on/off.

5.4. Mixed Control Function

The multi-channel mixing control function allows you to link multiple channels on the receiver to be controlled by a single channel on the transmitter. This is useful for complex setups requiring synchronized movements.

Figure 5.1: Transmitter in General Mode (factory default setting).

Figure 5.2: Transmitter in Mixed Mode (supports mix control of channel 1 and channel 2).

5.5. Winch Control

Connect your RC winch to the M1 slot on the receiver. Control of the winch will typically be assigned to one of the auxiliary channels (CH5, CH6, or CH7) on the transmitter, depending on your setup and model's requirements.

Figure 5.3: Winch connection to the RX-G7X receiver.

5.6. 낮은 볼륨tage 표시

The LED indicator on the transmitter will flash slowly when the battery voltage drops below 4.2V. This serves as a warning to replace the batteries to prevent loss of control.

6. 유지관리

• 청소: 부드럽고 마른 천을 사용하여 송신기와 수신기를 청소하십시오. 용제나 강한 화학 물질은 사용하지 마십시오.
• 배터리 관리 : 장기간 사용하지 않을 경우 누출을 방지하기 위해 송신기에서 배터리를 제거하세요.
• 저장: Store the transmitter and receiver in a cool, dry place, away from direct sunlight and extreme temperatures.
• 점검: Periodically check all wires and connectors for signs of wear or damage.

7. 문제 해결

8. 사양

Figure 8.1: Dimensions of the Transmitter and Receiver.

9. 안전 정보

• RC 모형 장난감은 항상 안전하고 탁 트인 공간에서 사람, 애완동물, 장애물로부터 멀리 떨어진 곳에서 작동시키십시오.
• Never operate your RC model near public roads or in areas with vehicle traffic.
• Keep fingers, hair, and loose clothing away from moving parts of the RC model.
• Do not operate the RC model in wet conditions or near water unless it is specifically designed for such environments.
• Ensure batteries are charged and installed correctly before each use.
• 14세 미만 사용자는 성인의 감독이 필요합니다.
• If the product is damaged, discontinue use immediately to prevent injury.