DIGITUS 열전사 라벨 프린터 DA-81021 300 DPI 사용 설명서

1. 서론

This manual provides detailed instructions for the installation, operation, and maintenance of your DIGITUS Thermal Transfer Label Printer DA-81021. Please read this manual thoroughly before using the printer to ensure proper function and longevity of the device. Keep this manual for future reference.

2. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• 1x 라벨 프린터
• 1x 전원 어댑터
• 1x USB 케이블
• 1x Test Label Paper
• 2x Label Roll Holders
• 1x Cardboard Case (packaging)
• 1x Ribbon
• 1x Ribbon Recycle Roll
• 2x Ribbon Screws
• 1x 빠른 설치 안내서(QIG)

3. 제품 오버view

Familiarize yourself with the printer's components and interfaces.

이미지: 앞면 view of the DIGITUS Thermal Transfer Label Printer DA-81021.

Image: Diagram illustrating the feed button, status indicator, ON/OFF switch, power supply input, microSD card slot, RJ45 Ethernet port, RS-232 serial port, and USB-B 2.0 port on the DIGITUS DA-81021 label printer.

이미지: 후면 view of the DIGITUS DA-81021 label printer, highlighting the various connectivity ports including USB, RS-232, Ethernet, and microSD card slot.

4. 설정

4.1. 프린터 연결

1. Connect the power adapter to the printer's power input and then to a power outlet.
2. Connect the printer to your computer using the provided USB cable, or via an RS-232 serial cable, or an Ethernet cable for network connectivity.
3. Turn on the printer using the ON/OFF switch located on the side of the device.

4.2. Loading Labels and Ribbon

The printer supports both direct thermal and thermal transfer printing methods. For thermal transfer printing, a ribbon is required.

Image: The DIGITUS DA-81021 label printer with its top cover open, illustrating the correct placement of a label roll within the housing.

이미지: 내부 view of the DIGITUS DA-81021 label printer, showing the mechanism for loading both the thermal ribbon and label media.

1. 프린터의 상단 덮개를 엽니다.
2. Insert the label roll onto the label roll holders and place it into the designated slot. Ensure the labels feed smoothly.
3. If using thermal transfer, install the ribbon onto the ribbon supply spindle and thread it through the print mechanism as indicated in the diagram. Secure the ribbon with the ribbon screws.
4. 상단 덮개를 닫습니다.

4.3. 드라이버 설치

Install the appropriate printer drivers for your operating system (Windows, Mac, Linux). Drivers are typically provided on a CD or can be downloaded from the Digitus support web사이트. 화면의 지시에 따라 설치하세요.

5. 프린터 작동

5.1. 기본 인쇄

Once the printer is connected and drivers are installed, you can print labels from your application. Ensure the label size and type settings in your software match the loaded media.

Image: The DIGITUS DA-81021 label printer actively printing a label on a desk, demonstrating its use in a typical office environment.

5.2. Printer Controls and Indicators

• 피드 버튼: Press to advance a single label or a set length of media.
• 상태 표시기: Provides visual feedback on the printer's status (e.g., ready, error, out of media). Refer to the QIG for specific light patterns.
• 온 / 오프 스위치: Controls the power to the printer.

5.3. Supported Media and Printing Features

• 라벨 유형: Continuous, gap, black mark, fan-fold, and perforated labels.
• 인쇄 해상도: 300 DPI for clear and sharp prints.
• 인쇄 속도: Up to 101.6 mm/s (4 inches/second).
• 인쇄 폭: Adjustable between 25.4 mm and 118 mm (1 to 4.25 inches).
• Ribbon Capacity: Supports 300-meter ribbons on a 25.4 mm (1 inch) core.
• 에뮬레이션: TSPL, EPL, ZPL, and DPL for broad compatibility with various label printing software.
• Barcode Support: Comprehensive support for 1D (e.g., Code 39, Code 128, EAN, UPC) and 2D (e.g., PDF-417, QR code, DataMatrix) barcodes.

6. 유지관리

6.1. 프린트 헤드 청소

Regular cleaning of the print head is crucial for maintaining print quality and extending the printer's lifespan. Use a lint-free cloth moistened with isopropyl alcohol. Ensure the printer is turned off and cooled down before cleaning.

이미지: 상세 내부 구조 view of the DIGITUS DA-81021 label printer, highlighting the print head, black ribbon, gap sensor, and black mark sensor.

6.2. 라벨 및 리본 교체

Replace label rolls and ribbons as they run out. Follow the loading instructions in Section 4.2. Always use compatible labels and ribbons to prevent damage to the printer and ensure optimal print quality.

7. 문제 해결

This section addresses common issues you might encounter with your label printer.

• 프린터가 응답하지 않습니다:
  • 전원 연결을 확인하고 프린터가 켜져 있는지 확인하세요.
  • Verify USB/Ethernet/Serial cable connections.
  • 프린터와 컴퓨터를 다시 시작하세요.
  • 드라이버가 올바르게 설치되었는지 확인하세요.
• 인쇄 품질이 좋지 않음:
  • 프린트 헤드를 청소하십시오(6.1절 참조).
  • Ensure the correct label and ribbon type are used for thermal transfer printing.
  • Adjust print density settings in your printer preferences.
  • Check if the ribbon or labels are properly loaded and not creased.
• 라벨이 제대로 부착되지 않음:
  • Ensure labels are loaded correctly and not jammed.
  • 라벨 경로에 장애물이 있는지 확인하십시오.
  • Verify label type settings in your software.

문제가 지속되면 고객 지원에 문의하세요.

8. 사양

Detailed technical specifications for the DIGITUS Thermal Transfer Label Printer DA-81021.

9. 보증 및 지원

EU 예비 부품 가용성: 구매일로부터 1년.

For technical support, driver downloads, or further assistance, please visit the official Digitus website or contact your local dealer. You can also find more information on the Digitus Brand Store.