소개
This manual provides essential information for the operation and care of your Transformers Legacy United Deluxe Class Animated Universe Bumblebee action figure. This 5.5-inch figure is inspired by the Transformers: Animated series and features a 2-in-1 conversion between robot and mini car modes.
주요 특징은 다음과 같습니다.
- Authentic deco and detail inspired by the Transformers: Animated animated series.
- Converts from robot to mini car mode in 22 steps.
- Includes 2 Stinger accessories and 2 turbo booster accessories, which can be attached in both modes.
- Articulated head, arms, and legs for dynamic posing.
안전 정보
경고: 질식 위험 - 작은 부품이 발생할 수 있습니다. 3세 미만 어린이는 사용하지 마십시오.
본 제품은 8세 이상 사용을 권장합니다. 8세 미만 어린이는 보호자의 감독 하에 사용해야 합니다.
상자 안에 무엇이 들어있나요?
패키지를 열 때 모든 구성품이 들어 있는지 확인하세요.
- 1 x Animated Universe Bumblebee Figure
- 2 x Stinger Accessories
- 2 x Turbo Booster Accessories
- 사용 설명서 1장 (본 설명서)
Image: The Bumblebee figure displayed next to its retail packaging, showing the contents as they appear when new.
설정
Your Transformers figure comes ready for play directly out of the box. No assembly is required beyond the transformation process. Carefully remove the figure and accessories from the packaging.
The included Stinger and turbo booster accessories can be attached to the figure in both robot and vehicle modes. Refer to the operating instructions for specific attachment points.
작동 지침: 변환
The Animated Universe Bumblebee figure converts between robot mode and mini car mode in 22 steps. Follow the instructions below carefully to avoid damage to the figure. Apply gentle, firm pressure during transformation.
Robot Mode to Mini Car Mode (22 Steps)
Image: Animated Universe Bumblebee in his robot form, ready for transformation.
- Ensure all accessories (Stingers, turbo boosters) are removed from the figure.
- 로봇의 손을 팔뚝 안으로 접으세요.
- Rotate the forearms inwards.
- Collapse the chest panel forward to begin forming the car's front.
- Fold the robot's head down and back into the chest cavity.
- Bring the shoulder sections together to form the car's roof and windshield.
- Align and snap the roof sections into place.
- 허리를 180도 돌리세요.
- Straighten the robot's legs.
- Fold the robot's feet upwards to become the rear bumper.
- Rotate the lower leg panels to align with the car's side panels.
- Bring the two leg sections together, ensuring they lock securely to form the rear of the car.
- Adjust the side panels to complete the car's body.
- Ensure all panels are flush and locked into place for a complete vehicle mode.
Image: Animated Universe Bumblebee in his mini car form.
액세서리 부착: The Stinger accessories can be attached to the figure's hands in robot mode or to designated ports on the sides/front of the car in vehicle mode. The turbo booster accessories can be attached to the rear of the car in vehicle mode.
Image: Bumblebee in robot mode with Stinger accessories attached to his arms.
Image: Bumblebee in mini car mode with Stinger accessories attached to the sides.
메모: The transformation steps are designed to be intuitive. If you encounter resistance, do not force parts. Re-examine the previous steps to ensure proper alignment. A visual guide is often provided on the product packaging or official online resources.
Image: Back of product packaging illustrating the 22-step transformation process.
Mini Car Mode to Robot Mode
To convert the figure back to robot mode, reverse the steps outlined above. Begin by separating the rear car sections to form the legs, then unfold the front car section to reveal the robot's torso and head. Ensure all panels are securely locked into place for a stable robot form.
유지
- 청소: 먼지를 제거하려면 부드럽고 마른 천으로 피규어를 닦으세요. 잘 지워지지 않는 오염의 경우, 가볍게 두드리세요.amp 천을 사용할 수 있지만 과도한 습기는 피하십시오. 독한 화학 약품이나 연마성 세척제를 사용하지 마십시오.
- 저장: 변색이나 소재의 변질을 방지하기 위해 직사광선과 극한의 온도를 피해 시원하고 건조한 곳에 보관하세요.
- 손질: Handle the figure by its main body parts. Avoid pulling or twisting small, delicate parts with excessive force, especially during transformation.
문제 해결
| 문제 | 가능한 원인 / 해결책 |
|---|---|
| 변형 과정에서 피규어 부품들이 제대로 정렬되지 않습니다. | Ensure all previous steps are completed correctly. Some panels may need to be rotated or folded precisely before others can align. Do not force parts; gently re-adjust. |
| 액세서리가 단단히 고정되지 않았습니다. | Verify that you are using the correct accessory for the designated port. Ensure the port is clear of debris. Apply gentle pressure until a click is heard or felt. |
| Figure feels loose or unstable in a particular mode. | Check that all locking tabs and panels are fully engaged. Review the transformation steps to ensure no step was missed or partially completed. |
명세서
| 기인하다 | 세부 사항 |
|---|---|
| 제품 치수 | 2.52 x 5.51 x 8.62 인치 |
| 품목 무게 | 4.6 온스 |
| 모델 번호 | F8524 |
| 추천연령 | 8세 이상 |
| 제조업체 | 하스브로 |
| 출시일 | 16년 2023월 XNUMX일 |
보증 및 지원
For information regarding product warranty or to obtain support for your Transformers figure, please contact Hasbro customer service directly. Details can typically be found on the official Hasbro web사이트 또는 제품 포장에 표시되어 있습니다.
온라인 리소스: Visit the official Transformers brand store for additional product information and updates:아마존의 트랜스포머 스토어
공식 제품 영상
이 설명서에 삽입할 수 있는 판매자의 공식 제품 비디오는 없습니다.