EVTSCAN Soil Tester User Manual

소개

This manual provides detailed instructions for the proper use and maintenance of your EVTSCAN Soil Tester. Please read this manual thoroughly before operating the device to ensure accurate measurements and prolonged product life. This device is designed for measuring soil temperature, air temperature, air humidity, and illumination levels in various environments such as plants, gardens, lawns, and farms.

제품 끝view

The EVTSCAN Soil Tester is a portable device designed for quick and accurate environmental measurements. It features a clear display, easy-to-use buttons, and a durable probe.

그림 1: 전면 view of the EVTSCAN Soil Tester.

주요 특징:

• 사용하기 쉽습니다: Obtain test results quickly by inserting the probe into the soil.
• 정확한 측정: Designed for precise readings of environmental conditions.
• Data Lock Function: A dedicated HOLD button allows for convenient data view주고받음.
• 휴대성 있는 디자인: 컴팩트하고 가벼워 휴대가 간편하며 다양한 장소에서 사용할 수 있습니다.
• 다양한 응용 프로그램: Suitable for family plants, gardens, lawns, and farms.

설정

배터리 설치:

1. 장치 뒷면에서 배터리함을 찾으세요.
2. 배터리 덮개를 엽니다.
3. Remove any packaging from the included 9V 6F22 dry battery.
4. 9V 배터리를 삽입할 때 극성을 확인하십시오.
5. 배터리 덮개를 단단히 닫으세요.

그림 2: 배터리함의 위치.

Note: The device will not power on until the battery is correctly installed and any protective film is removed from the battery terminals.

작동 지침

장치 제어:

Figure 3: Control buttons on the EVTSCAN Soil Tester.

• 켜기/끄기 버튼:
  • 짧게 눌러 기기를 켜세요.
  • Long press for 3 seconds to turn the device off.
  • 이 기기는 배터리 수명 절약을 위해 15분 동안 사용하지 않으면 자동으로 꺼집니다.
• ℃/℉ 버튼:
  • Press this button to switch the temperature unit between Celsius (℃) and Fahrenheit (℉).
• 홀드 버튼:
  • Press this button to lock the current readings on the display. This is useful for recording data.
  • Press again to release the data lock and resume live readings.

측정하기:

1. Turn on the device by short pressing the 켜짐/꺼짐 단추.
2. Insert the metal probe into the soil to approximately 2/3 of its length (about 14-15 cm or 5.5-6 inches). Ensure the probe is fully inserted into the root zone for accurate soil readings.
3. Position the device to face the sun for accurate illumination readings.
4. Wait a few moments for the readings to stabilize on the display. The display will show soil temperature, air temperature, air humidity, and illumination.
5. 원하는 경우 잡고 있다 button to lock the displayed data for easier recording.
6. After use, gently remove the probe from the soil.

Figure 4: Probe length and recommended insertion depth.

그림 5: 예ample of readings on the display.

명세서

유지

• 청소: After each use, wipe the metal probe clean with a damp cloth to remove any soil residue. Do not immerse the main body of the device in water.
• 저장: Store the soil tester in a dry, cool place away from direct sunlight and extreme temperatures.
• 배터리 교체: If the display becomes dim or the device does not power on, replace the 9V battery. Ensure proper disposal of old batteries according to local regulations.
• 충격 방지: Handle the device with care to prevent damage to the probe or internal components.

문제 해결

보증 및 지원

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official EVTSCAN web사이트. 구매 증빙 자료로 구매 영수증을 보관하세요.