1. 제품 오버view
The CHROX Front Wiper Blades are designed to provide clear visibility and reliable performance for your vehicle's windshield. These blades are engineered for smooth, quiet, and streak-free wiping, even in challenging weather conditions.
주요 특징은 다음과 같습니다.
- Smooth, quiet, and smear-free wiping performance.
- Durable materials for extended service life.
- Flexible steel bar design ensures maximum contact with the windshield for uniform pressure.
- Natural rubber material for optimal wiping and reduced noise.
이미지 1.1: 이상view of the CHROX Front Wiper Blades.
2. 호환성
These wiper blades are specifically designed for the following vehicle model:
- 만들다: 토요타
- 모델: Fortuner AN50 AN60
- 연령: 2004 - 2015
Note: These wiper blades are not suitable for Right Hand Drive vehicles.
Image 2.1: Wiper blades demonstrating water-clearing capability, with a Toyota Fortuner shown for compatibility reference.
3. 패키지 내용
패키지에는 다음이 포함됩니다.
- 1 x 21-inch Front Wiper Blade
- 1 x 19-inch Front Wiper Blade
Image 3.1: Contents of the wiper blade package.
4. 안전 정보
Please read and understand all instructions before installation. Improper installation may lead to reduced performance or damage to your vehicle.
- Ensure the vehicle is turned off and the ignition key is removed before beginning installation.
- Exercise caution when handling wiper arms, as they are spring-loaded and can snap back forcefully.
- Do not operate wipers on a dry windshield, as this can damage the blades and the windshield surface.
- 설치 중에는 손과 손가락이 움직이는 부품에 닿지 않도록 하십시오.
5. 설정 및 설치
Follow these steps for quick and easy installation of your new CHROX wiper blades. These blades feature a U-type hook connection.
- 와이퍼 암을 준비하세요: Gently lift the wiper arm away from the windshield until it locks into the upright position. Place a towel or cardboard on the windshield to prevent damage if the arm accidentally springs back.
- Remove Old Wiper Blade: Locate the small tab or button on the underside of the old wiper blade where it connects to the wiper arm. Press this tab and slide the old blade off the U-type hook.
- Identify Wiper Blade Type: The CHROX wiper blades are designed for U-type wiper arms. Ensure your vehicle's wiper arm has this hook style.
Image 5.1: Detail of the U-type wiper blade connector.
- Install New Wiper Blade: Slide the U-type hook of the wiper arm through the opening on the new CHROX wiper blade connector. Pull the blade up until it clicks into place, securing it to the arm.
- 블레이드 고정: Ensure the blade is firmly attached by gently pulling on it. The locking mechanism should prevent it from detaching.
- 리턴 와이퍼 암: Carefully lower the wiper arm back onto the windshield. Repeat the process for the other wiper blade.
Image 5.2: Step-by-step visual guide for wiper blade installation.
6. 사용 설명서
Once installed, the CHROX wiper blades operate in conjunction with your vehicle's existing wiper system. Refer to your vehicle's owner's manual for specific instructions on operating the windshield wipers, including speed settings and washer fluid activation.
- Always use windshield washer fluid when operating wipers on a dry or dusty windshield to prevent damage and ensure effective cleaning.
- Regularly check the washer fluid reservoir and refill as needed.
7. 유지관리
Proper maintenance can extend the life and performance of your wiper blades:
- 정기적으로 칼날을 청소하세요: Wipe the rubber edge of the blades with a damp cloth or a mild glass cleaner to remove dirt, grime, and road film.
- 손상 여부 검사: Periodically check the rubber for cracks, tears, or hardening. Replace blades if any damage is observed.
- 가혹한 화학 물질을 피하세요: Do not use petroleum-based cleaners or solvents on the wiper blades, as these can degrade the rubber.
- 투명한 얼음과 눈: Before operating wipers in freezing conditions, ensure any ice or heavy snow is cleared from the windshield to prevent damage to the blades and wiper motor.
8. 문제 해결
와이퍼 블레이드에 문제가 발생하면 다음과 같은 일반적인 문제와 해결책을 고려해 보세요.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 줄무늬 또는 번짐 | 더러운 칼날, 마모된 고무, 또는 앞유리 오염. | Clean blades and windshield. If problem persists, inspect blades for wear and replace if necessary. |
| 수다쟁이 또는 건너뛰기 | 블레이드 각도가 잘못되었거나 고무가 마모되었거나 앞 유리가 건조합니다. | Ensure windshield is wet. Check for proper installation. If blades are old, replace them. |
| 소음(삐걱거리는 소리/삐걱거리는 소리) | Dry windshield, dirty blades, or worn rubber. | Use washer fluid. Clean blades. Replace if rubber is hardened or cracked. |
| 불완전한 닦아내기 | 와이퍼 암이 휘었거나, 날이 마모되었거나, 압력이 부족한 경우. | Inspect wiper arm for bends. Replace blades. |
9. 사양
- Blade Sizes: 21 inches (driver side), 19 inches (passenger side)
- 재료: Natural Rubber, Stainless Steel, Zinc Alloy Base
- 연결 유형: U자형 후크
- 애플리케이션: 앞 유리창
Image 9.1: Components and materials of the wiper blade.
10. 보증 및 지원
CHROX products are manufactured to high-quality standards. For any questions regarding installation, performance, or warranty claims, please contact your retailer or the manufacturer directly. Please retain your proof of purchase for warranty purposes.
We strive to provide the best quality products and customer experience. If you have any questions or concerns, please do not hesitate to contact us.
