1. 서론
This manual provides essential information for the safe and efficient use of your DATOU BOSS LiFePO4 Battery 12V 100Ah. Please read this manual thoroughly before installation and operation. Retain this manual for future reference.
Image 1.1: DATOU BOSS 12V 100Ah LiFePO4 Battery. This image shows the overall appearance of the battery unit.
2. 안전 정보
Always observe the following safety precautions to prevent injury or damage to the battery and connected equipment.
- 양극과 음극 단자를 단락시키지 마십시오.
- 배터리를 개조하거나 분해하지 마세요.
- Avoid exposing the battery to fire or water.
- 충전 및 방전 중에는 적절한 환기가 이루어지도록 하십시오.
- Use only chargers compatible with LiFePO4 batteries.
- 화학적 구성이나 용량이 다른 배터리를 연결하지 마십시오.tag에스.
- 어린이의 손이 닿지 않는 곳에 보관하세요.
Image 2.1: Battery Management System (BMS) Protection. This diagram illustrates the built-in protections against over-charge, over-discharge, short circuit, overload, and overheating.
The integrated Battery Management System (BMS) provides protection against over-charge, over-discharge, over-current, short circuit, and over-temperature conditions, enhancing safety during use.
3. 제품 오버view 및 기능
The DATOU BOSS 12V 100Ah LiFePO4 battery is designed for various applications, offering high performance and durability.
3.1 주요 특징
- 높은 수명 주기: Offers 8000+ deep cycles, providing a long operational lifespan.
- 가벼운 디자인: Approximately 1/3 the weight of comparable lead-acid batteries, featuring a non-metallic belt handle for easy portability.
- 통합 BMS: Built-in 120A Battery Management System protects against common electrical faults.
- 폭넓은 작동 온도: Designed for charging temperatures from -20°C to 55°C and discharging temperatures from 0°C to 60°C.
- IP65 방수: 먼지와 물의 침투를 막아줍니다.
Image 3.1: Battery Specifications and Dimensions. This image details the battery's capacity (12.8V 100Ah, 1280Wh), maximum charging current (50A), maximum discharge current (120A), and physical dimensions (33cm x 17cm x 21cm).
3.2 용량 확장
The battery supports both series and parallel connections, allowing for system expansion up to a maximum of 4S4P (51.2V 400Ah) to achieve higher voltage and capacity configurations.
Image 3.2: Expandable Capacity. This illustration demonstrates how multiple batteries can be connected in series and parallel to create a larger battery system, such as a 4S4P 51.2V 400Ah system with 20.48kW output power.
3.3 어드밴tages Over Lead-Acid Batteries
LiFePO4 batteries offer significant advantages compared to traditional lead-acid batteries, including longer lifespan, lighter weight, and higher depth of discharge.
Image 3.3: Comparison with Lead-Acid Batteries. This image highlights the differences in weight, size, lifespan, and cycle times between LiFePO4 and lead-acid batteries.
3.4 일반적인 애플리케이션
This LiFePO4 battery is suitable for a wide range of applications, including:
- Electric Vehicles and Recreational Vehicles (RVs)
- 가정용 에너지 저장 시스템
- Golf Carts and Boathouses
- Trolling Motors and E-Scooters
- Lighting and Fish Finders
- UPS Backup Power Supply
- Home Solar Equipment
Image 3.4: Diverse Applications. This image displays various scenarios where the battery can be used, such as solar-powered homes, RVs, boats, and general energy storage.
3.5 Power Output Examp레
The battery can power various appliances for extended periods, making it suitable for off-grid and portable power needs.
Image 3.5: Appliance Run Times. This image provides examples of how long the battery can power common household appliances, such as a blender (500W for 7.6 hours) or a microwave (1000W for 3.8 hours).
4. 설정 및 설치
4.1 초기 검사
Upon receiving the battery, inspect it for any visible damage. If damage is found, contact your supplier immediately.
4.2 연결 지침
- 모든 연결 부분이 안전하고 적절히 절연되어 있는지 확인하세요.
- Connect positive terminals to positive and negative to negative.
- For series or parallel connections, ensure all batteries are of the same type, capacity, and state of charge before connecting.
- Use appropriate gauge cables for your application to prevent overheating.
Image 4.1: Solar Panel Connection. This diagram illustrates a typical setup involving a solar panel, MPPT controller, and the LiFePO4 battery for charging.
4.3 장착
Mount the battery in a stable, well-ventilated area, away from direct sunlight, heat sources, and flammable materials. Ensure the battery is secured to prevent movement.
5. 사용 설명서
5.1 충전 중
- Use a dedicated LiFePO4 battery charger with appropriate voltag전자 및 현재 설정.
- 권장 충전량tage: 14.4V - 14.6V.
- Maximum charging current: 50A.
- Charging temperature range: -20°C to 55°C.
- Avoid charging below 0°C without a low-temperature charging function, as this can damage the battery.
5.2 방전
- Maximum continuous discharge current: 120A.
- Discharging temperature range: 0°C to 60°C.
- The BMS will automatically cut off power if the discharge current or temperature exceeds safe limits.
6. 유지관리
- 일반 충전: If the battery is not in regular use, it is recommended to charge it every three months to prolong its lifespan.
- 터미널 검사: 배터리 단자에 부식이나 연결 불량이 있는지 주기적으로 점검하고 필요에 따라 청소하십시오.
- 저장: Store the battery in a cool, dry place, ideally at a state of charge between 50% and 80%. Avoid extreme temperatures.
- 청소: 배터리 c를 청소하세요asin마른 천으로 닦아주세요. 용제나 연마성 세척제를 사용하지 마세요.
7. 문제 해결
If you encounter issues with your battery, refer to the following common problems and solutions. For complex issues, contact customer support.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 배터리가 충전되지 않음 | Charger not connected, faulty charger, BMS protection activated (over-discharge) | Check charger connection and functionality. Ensure charger is compatible. If BMS is active, try a low-current charge to reactivate. |
| 전원 출력 없음 | Loose connections, BMS protection activated (over-discharge, over-current, short circuit), battery fully discharged | Check all cable connections. Charge the battery. If BMS is active, remove load and allow it to reset. |
| 배터리 과열 | Excessive load, poor ventilation, high ambient temperature | Reduce load. Ensure adequate ventilation around the battery. Operate within specified temperature ranges. BMS will shut down if temperature is too high. |
8. 사양
| 특징 | 값 |
|---|---|
| 모델 번호 | DT-12V-100Ah |
| 공칭 권tage | 12.8V |
| 정격 용량 | 100아아 |
| 에너지 | 1280Wh |
| 최대 연속 충전 전류 | 50A |
| 최대 연속 방전 전류 | 120A |
| 권장 충전량tage | 14.4V - 14.6V |
| 충전 온도 범위 | -20°C ~ 55°C |
| 방전 온도 범위 | 0°C ~ 60°C |
| 사이클 수명 | 8000회 이상 사이클(80% DoD 기준) |
| 치수(길이 x 너비 x 높이) | 32.99 x 16.99 x 21.49cm |
| 무게 | Approximately 1/3 the weight of a comparable lead-acid battery |
| 비엠에스 | 내장형 120A BMS |
| 방수 등급 | IP65 |
Note: The specific gram weight provided in some product data appears to be a typographical error for a 100Ah battery. LiFePO4 batteries are significantly lighter than lead-acid equivalents, typically around 1/3 the weight.
9. 보증 및 지원
보증 정보, 기술 지원 또는 서비스 문의는 구매처 또는 제조업체에 직접 문의하십시오. 구매 영수증을 보관하여 구매 증빙 자료로 활용하시기 바랍니다.