FLEXISPOT QS2L 듀얼 모터 L자형 스탠딩 데스크 사용 설명서

중요한 안전 정보

조립 및 사용 전에 모든 지침을 주의 깊게 읽어 주십시오. 지침을 따르지 않을 경우 부상이나 제품 손상이 발생할 수 있습니다.

• Ensure the desk is securely assembled according to instructions.
• 최대 권장 중량을 초과하지 마십시오. 176파운드.
• Improper use may result in injury or desk instability.
• 작동 중에는 어린이와 애완동물이 책상에 접근하지 못하도록 하세요.
• Ensure no obstacles are in the path of the desk during height adjustments.

제품 끝view

The FLEXISPOT QS2L Dual Motor L-Shaped Standing Desk is designed to provide a versatile and ergonomic workspace. This electric height-adjustable desk allows seamless transitions between sitting and standing positions, promoting better posture and comfort throughout your workday.

주요 특징:

• 듀얼 모터 시스템: Ensures stable and smooth height adjustments.
• L자형 데스크탑: Provides an expansive work surface (63x43.3 inches) for multiple monitors and accessories.
• 높이 조절 : Continuous height adjustment from 28.3 to 46 inches.
• Intelligent Controller: Features up/down buttons, a reset function, and memory presets for sitting and standing positions.
• 견고한 구조: Made with industrial-grade alloy steel frame and a durable splice board desktop.
• 중량 용량: Supports up to 176 pounds.

Figure 1: FLEXISPOT QS2L L-Shaped Standing Desk in a modern office setup, showcasing its spacious design and integrated control panel.

Figure 2: The FLEXISPOT QS2L desk integrated into a home office environment, providing ample space for work and accessories.

명세서

Figure 3: Detailed dimensions of the FLEXISPOT QS2L L-Shaped Standing Desk, showing a width of 63 inches, depth of 43.3 inches, and maximum height of 46 inches.

Figure 4: Diagram illustrating the desktop size (63x43.3 inches) and adjustable height range of the desk frame (28.3-46 inches).

설정 및 조립

Assembly of the FLEXISPOT QS2L desk requires attention to detail. It is recommended that two people assemble the desk to ensure stability and ease of construction. All necessary hardware and pieces are included.

총회 절차:

1. 모든 구성품을 꺼내 동봉된 설명서의 부품 목록과 대조하여 확인하십시오.
2. Assemble the desk frame, ensuring all screws are tightened securely.
3. Attach the splice board desktop to the assembled frame.
4. Connect the control panel and motor cables as per the detailed instructions in your manual.
5. Perform an initial reset of the desk (refer to the Operating Instructions section).

Figure 5: The robust 4-leg solid structure and frame of the FLEXISPOT desk, designed for stability and safety, having undergone over 20,000 cycle tests.

Figure 6: Close-up of the dual-stage legs, highlighting the continuous height adjustment capability from 28.3 to 46 inches.

작동 지침

The FLEXISPOT QS2L desk features an intelligent control panel for easy height adjustment and memory functions.

제어판 기능:

Figure 7: The intelligent control panel, featuring Up/Down arrows for height adjustment, a Reset button, and memory presets for sitting and standing positions.

• 위/아래 화살표: Press and hold to adjust the desk height upwards or downwards.
• 리셋 버튼(R): Used to reset the desk to its lowest position and clear error codes.
• 메모리 사전 설정(1, 2, 3, 4):
  1. 원하는 높이로 책상을 조정하세요.
  2. Press the 'M' button, then press the desired number (1-4) to save the current height.
  3. 저장된 높이를 불러오려면 해당 숫자 버튼을 누르기만 하면 됩니다.
• Sit/Stand Reminders: Some models may include programmable reminders to switch between sitting and standing. Refer to your specific manual for details.

유지

Proper maintenance ensures the longevity and optimal performance of your FLEXISPOT QS2L desk.

• 청소: Wipe the desk surfaces with a dry cloth. Avoid abrasive cleaners or harsh chemicals.
• 나사 조임 정도: Periodically check and tighten all screws on the frame, legs, and desktop to maintain stability.
• 케이블 관리 : Ensure all cables are neatly managed and not pinched or tangled, especially during height adjustments. The included cable management tray can assist with this.
• 중량 제한: Always adhere to the maximum weight recommendation of 176 pounds to prevent damage to the motors and frame.

문제 해결

If you encounter any issues with your FLEXISPOT QS2L desk, refer to the solutions below. For complex problems, contact customer support.

일반적인 문제 및 해결책:

1. E10 Error (During manual controller use):
   • Method 1 (Reset): Hold down the down button for three seconds until "RES" is displayed. Release the button. The table will run down to its lowest point and bounce back slightly to show the lowest height. This should resolve the E10 error.
   • Method 2 (Wait): If Method 1 doesn't work, wait 8 minutes for the manual to naturally cool down, then repeat Method 1.
   • Method 3 (Motor Problem): If the above methods fail, there might be a problem with the motor. Disassemble the frame and replace the motor.
2. E20 Error (During manual controller use, often due to overload):
   • 부하 감소: Ensure the weight on the desk is less than the rated load range (176 lbs). Remove any excess weight.
   • 재설정 : Hold down the down button for three seconds until "RES" is displayed. Release the button. The table will run down to its lowest point and bounce back slightly to show the lowest height. This should resolve the E20 error.
3. 비정상적인 소음:
   • Check Motor Screws: Verify that the two mounting screws of the motor are tight. If not, tighten them.
   • Check Frame Screws: Ensure that the screws on the beam and column are tight. If not, tighten them.
4. Instability / Wobbling:
   • Check Footing and Column Screws: Verify that the screws on the footing and column are tight. If not, tighten them.
   • Check Beam and Column Screws: Ensure that the screws on the beam and column are tight. If not, tighten them.
5. Integral Inability to Rise and Fall / Single Side Lift:
   • Check Hand Controller Wires: Ensure the wires behind the hand controller are properly connected. Reinsert and install if improperly connected.
   • 전원 공급 장치 확인: Verify that the power supply is properly connected and reinsert it if necessary.
   • 재설정 : Hold down the down button for three seconds until "RES" is displayed. Release the button. The table will run down to its lowest point and bounce back slightly to show the lowest height.
   • Check Hex Bar Installation: Ensure the hex bar is not inverted. The long side with the card slot should be tightened with the motor, and the side with the hole spacer faces up. The hexagon bar with the motor side is mounted on the No. 1 leg, and the short side clamp slot is installed on the No. 2 leg.

보증 및 지원

The FLEXISPOT QS2L Dual Motor L-Shaped Standing Desk comes with a 한정 보증. For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official FLEXISPOT web대지.

For customer support, technical assistance, or to inquire about replacement parts, please contact FLEXISPOT customer service. Contact information can typically be found on the manufacturer's web사이트 또는 제품 포장에 포함되어 있습니다.